Thesis (Ph. D.)--Drexel University, 2005. / Includes abstract and vita. Includes bibliographical references (leaves 162-167).

Thesis (Ph.D.) - University of Queensland, 2004. / Includes bibliography.

Thesis (M.S. in Systems Technology (Command, Control and Communications (C3))--Naval Postgraduate School, June 2007. / Thesis Advisor(s): Thomas Housel. "June 2007." Includes bibliographical references (p. 79-82). Also available in print.

Thesis (Ph.D.) OGI School of Science & Engineering at OHSU, May 2007. / Includes bibliographical references (leaves 323-338).

No abstract available / Dissertation (MSc (Bioinformatics))--University of Pretoria, 2007. / Biochemistry / MSc / unrestricted

Thesis (M. Tech.) -- Central University of Technology, Free State, 2007 / In South Africa, water is a scarce resource and it has become very important to manage this resource effectively. The State developed a regulating framework, under the hospice of the Minister of Water Affairs and Forestry, which protects the country‟s water resources from over-exploitation by ensuring that it is protected, used, developed, conserved, and managed, in a sustainable and equitable manner. The laws and policies governing the use of water resources are contained in the National Water Act (South Africa, 1998), the National Water Policy (South Africa, 1997a), the National Water Resource Strategy, and the Water Services Act (South Africa, 1997b). In addition some water-related functions were transferred to Catchment Management Agencies and Water Users‟ Associations, and it is their task to ensure that the strategies, laws and policies are implemented. Effective water management can only be performed by making use of hydroinformatics which assists with simulations and estimations. As a result input data will be collected, added to a Relational Database Management System and output results generated. A Geographic Information System with the support of a geodatabase will allow users to store spatial and temporal data. The research project investigated different water-related data models (ArcHydro, Hydstra, GML, HYMOS, and WinHSPF), as well as hydrological modelling frameworks (BASINS, OMS, OpenMI, SPATSIM, and TIME) to determine whether they were adequate to assist with the decision making of water-related activities. It was found that these data models and hydrological modelling frameworks did not allow users to add new datasets to their existing data structures and in many cases only had a limited set of functions. For these reasons it was decided to develop a comprehensive, modifiable, geodatabase that will function in a modelling environment which will allow users to save their data in a centralised database. Additionally the functionality provided by other data models and modelling frameworks may be linked and used in the new modelling environment. A methodology that has been followed was to first establish the objectives of the research project, gather the necessary data, investigate various data models and hydrological modelling frameworks, determine the requirements for the modelling environment, design and create the modelling environment, design and create the geodatabase, and finally selecting the study area which will provide the research project with the necessary data. The following findings were made concerning the research project: firstly, that ArcHydro will be used as example data model to assist in designing the geodatabase. Secondly, that UML will be used as a development tool to assist with the development of the geodatabase. Thirdly, that the geodatabase will be generated from the XML schema and be made available to ArcCatalog. Fourthly, that data from different users/providers (Hydstra, Stats SA, Weather Bureau, Department of Water Affairs and Forestry, etc.) be inserted into the geodatabase. Fifthly, that any other hydrological modelling framework may make use of the data stored in the geodatabase. Finally, ArcGIS was selected as GIS application and Microsoft Access as a storage area.

In any infrastructure project, managing the built assets is an important task. In the case of transportation asset inventories, a significant cost and effort is spent on recording and storing the asset information. In order to reduce the time and cost involved in road corridor mapping, this paper proposes a low cost MMS (Mobile Mapping System) using an equipped laser scanner and cameras. The process of building the MMS, components and sensors involved and calibration procedures are discussed. The efficiency of this Mobile Mapping System is experimented by mounting it on a truck and golf cart. The paper also provides a framework to extract road assets both automatically and manually using stateof- the-art techniques. The efficiency of this method is compared with traditional field survey methods. Quality of collected data, data integrity and process flow are experimented with a sample asset management framework and a spatial database structure for mapping road corridor features. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2016. / FAU Electronic Theses and Dissertations Collection

Software testing is an important phase the of software development cycle which reveals faults and ensures correctness of the developed software. Distributed real-time systems are mostly safety critical systems for which the correctness and quality of the software is much more significant. However, majority of the current testing techniques have been developed for sequential (non real-time) software and there is a limited amount of research on testing distributed real-time systems. In this thesis, a proposed approach in the academic literature testing distributed real-time systems using a distributed test architecture is implemented and compared to existing software testing practices in a software development company on a case study. Evaluation of the results show the benefits of using the considered distributed test approach on distributed real-time systems in terms of software correctness.

Thesis (M.S.)--Mississippi State University. Department of Computer Science and Engineering. / Title from title screen. Includes bibliographical references.

The use of High-Frequency (HF) radio-wave propagation in the ionosphere remains prevalent for applications such as long-range communication, target detection and commercial broadcasting. The ionosphere presents a challenging channel for radio-wave propagation as it is a varying medium dependent on a number of external factors. Of the many adverse effects of ionospheric propagation, signal fading is one of the most difficult to eliminate due to its unpredictable nature. Increase in the knowledge of how the ionospheric channel affects the propagating signals, in particular fading of the signals, will drive the continual improvements in the reliability and performance of modern wide-bandwidth HF systems. This is the underlying motivation for the study of signal fading of HF radio-waves propagating through the ionosphere, from both the theoretical and experimental perspectives, with the focus of application to modern wide bandwidth HF systems. Furthermore, it is the main objective of this investigation to address the lacking in the current literature of a simple analytical signal fading model for wideband HF systems that relates the physics of the ionospheric irregularities to the observable propagation effects due to the irregularities, and one that is verified by experimental observations. An original approach was taken in the theoretical investigation to develop an analytical model that combines the effects of signal fading and directly relating them to the ionospheric irregularities that are causing the fading. The polarisation fading model (PFM) is a combination of geometric optics, perturbation techniques and frequency offset techniques to derive expressions for the Faraday rotation of the radio-wave propagating in the ionosphere. Using the same notation as the PFM, the amplitude fading model (AFM) extends the Complex Amplitude concept using perturbation techniques and Green’s functions solution to arrive at a set of expressions that describes the focussing and defocussing effects of the wave. The PFM and AFM, together with expressions for combining the effects of multiple propagation paths, provide a simple analytic model that completely describes the fading of the signal propagating in the ionosphere. This theoretical model was implemented into an efficient ionospheric propagation simulator (IPS) from which simulations of wide bandwidth HF signals propagating through the ionosphere can be undertaken. As an example of the type of results produced by the IPS, for a typical 1200km path in the north-south direction with the ionospheric channel under the influence of a travelling ionospheric disturbance (TID), a 10 MHz radio-wave signal in one-hop path is shown to be affected by polarisation fading with fading periods in the order of minutes, and a fading bandwidth in the order of 100 kHz. Further results generated by the IPS have shown to be consistent with the results reported elsewhere in the literature. The experimental investigation involves the study of signal fading from observations of real signals propagating in the ionosphere, a major part of which is the development of a digital compact channel probe (CCP) capable of operating in dual-polarisation mode, and the characterisation of such systems to ensure that data collected are not compromised by the non-idealities of the individual devices contained within the system. The CCP was deployed in experiments to collect transmissions of HF frequency-modulated continuouswave (FMCW) radio signals from the Jindalee Over-the-Horizon radar (OTHR) in dualpolarisation. Analyses of the collected data showed the full anatomy of fading of signals propagating in the ionosphere for both horizontal and vertical polarisations, the results of which are consistent with that from the IPS and thus verifying the validity of the theoretical model of fading. Further experimental results showed that in majority of the observations polarisation fading is present but can be masked by multi-path fading, and confirming that periods of rapid signal fading are associated with rapid changes in the ionospheric channel. From the theoretical and experimental investigations, the major achievement is the successful development of an efficient propagation simulator IPS based on the simple analytical expressions derived in the PFM and AFM theoretical models of signal fading, which has produced sensible signal fading results that are verified by experimental observations. One of the many outcomes of this investigation is that polarisation diversity has the potential to bring improvements to the quality of wide-bandwidth HF signals in a fading susceptible propagation channel. The combination of an efficient propagation simulator IPS based on theoretical signal fading model and the experimental data collection by the dual-polarisation CCP is a major step in allowing one to fully understand the different aspects of fading of signals propagating in the ionosphere, which sets a solid foundation for further research into the design of wide bandwidth HF systems and the possible fading mitigation techniques. / Thesis (Ph.D.) -- University of Adelaide, School of Electrical and Electronic Engineering, 2008