Organic materials, such as conjugated polymers, have emerged as a promising alternative for the production of inexpensive and flexible photovoltaic cells. As conjugated polymers are soluble, liquid based printing techniques enable production on large scale to a price much lower than that for inorganic based solar cells. Present day state of the art conjugated polymer photovoltaic cells are comprised by blends of a semiconducting polymer and a soluble derivative of fullerene molecules. Such bulk heterojunction solar cells now show power conversion efficiencies of up to 4-6%. The quantum efficiency of thin film organic solar cells is however still limited by several processes, of which the most prominent limitations are the comparatively low mobility and the high level of charge recombination. Hence organic cells do not yet perform as well as their more expensive inorganic counterparts. In order to overcome this present drawback of conjugated polymer photovoltaics, efforts are continuously devoted to developing materials or devices with increased absorption or with better charge carrier transporting properties. The latter can be facilitated by increasing the mobility of the pure material or by introducing beneficial morphology to prevent carrier recombination. Minimizing the active layer film thickness is an alternative route to collect more of the generated free charge carriers. However, a minimum film thickness is always required for sufficient photon absorption. A further limitation for low cost large scale production has been the dependence on expensive transparent electrodes such as indium tin oxide. The development of cheaper electrodes compatible with fast processing is therefore of high importance. The primary aim of this work has been to increase the absorption in solar cells made from thin films of organic materials. Device construction, deploying new geometries, and evaluation of different methods to provide for light trapping and photon recycling have been strived for. Different routes to construct and incorporate light trapping structures that enable higher photon absorption in a thinner film are presented. By recycling the reflected photons and enhancing the optical path length within a thinner cell, the absorption rate, as well as the collection of more charge carriers, is provided for. Attempts have been performed by utilizing a range of different structures with feature sizes ranging from nanometers up to centimeters. Surface plasmons, Lambertian scatterers, micro lenses, tandem cells as well as larger folded cell structures have been evaluated. Naturally, some of these methods have turned out to be more successful than others. From this work it can nevertheless be concluded that proper light trapping, in thin films of organic materials for photovoltaic energy conversion, is a technique capable of improving the cell performance. In addition to the study of light trapping, two new alternative electrodes for polymer photovoltaic devices are suggested and evaluated.

abstract: Solar energy is a promising alternative for addressing the world's current and future energy requirements in a sustainable way. Because solar irradiation is intermittent, it is necessary to store this energy in the form of a fuel so it can be used when required. The light-driven splitting of water into oxygen and hydrogen (a useful chemical fuel) is a fascinating theoretical and experimental challenge that is worth pursuing because the advance of the knowledge that it implies and the availability of water and sunlight. Inspired by natural photosynthesis and building on previous work from our laboratory, this dissertation focuses on the development of water-splitting dye-sensitized photoelectrochemical tandem cells (WSDSPETCs). The design, synthesis, and characterization of high-potential porphyrins and metal-free phthalocyanines with phosphonic anchoring groups are reported. Photocurrents measured for WSDSPETCs made with some of these dyes co-adsorbed with molecular or colloidal catalysts on TiO2 electrodes are reported as well. To guide in the design of new molecules we have used computational quantum chemistry extensively. Linear correlations between calculated frontier molecular orbital energies and redox potentials were built and tested at multiple levels of theory (from semi-empirical methods to density functional theory). Strong correlations (with r2 values > 0.99) with very good predictive abilities (rmsd < 50 mV) were found when using density functional theory (DFT) combined with a continuum solvent model. DFT was also used to aid in the elucidation of the mechanism of the thermal relaxation observed for the charge-separated state of a molecular triad that mimics the photo-induced proton coupled electron transfer of the tyrosine-histidine redox relay in the reaction center of Photosystem II. It was found that the inclusion of explicit solvent molecules, hydrogen bonded to specific sites within the molecular triad, was essential to explain the observed thermal relaxation. These results are relevant for both advancing the knowledge about natural photosynthesis and for the future design of new molecules for WSDSPETCs. / Dissertation/Thesis / Ph.D. Chemistry 2014

Since the beginning of the Industrial Revolution, the global energy consumption has been continuously increasing, supplied mainly by coal, oil and natural gases. Unfortunately, this consumption is linked to the emission of greenhouse gasses such as CO2 to the atmosphere. For this reason, it is extremely important to look for sustainable and renewable energy sources in order to replace the commonly used fossil fuels. Within the different types of renewable energy sources, solar energy holds by far the largest potential capacity. In this respect, artificial photosynthesis is a promising technology not only to harvest solar energy, but also as a means of storage by producing energy-rich chemical fuels such as H2 from water. The main components of photoelectrochemical water splitting devices are the semiconductor light absorber photoelectrodes and the electrolyte. Chapter 1 reviews the fundamental aspects of photoelectrochemical water splitting and overviews the physics and electrochemistry of semiconductor materials. The second chapter describes the methodologies and techniques employed throughout the thesis. The experimental results are reported from Chapter 3 to 8, focusing on the development and further optimization of two photoelectrodes, concretely hematite and cupric oxide, besides the design and fabrication of tandem cells for standalone water splitting. In the case of hematite photoanodes, the main efforts have focused on its doping to enhance carrier density and mobility as a way of diminishing recombination. The major drawback present in cupric oxide photoelectrodes is their instability against photocorrosion, for this reason, research has focused on protecting them, both by impregnation and adsorption methodologies. Finally, a tandem cell composed by a hematite photoanode and a cupric oxide photocathode was developed. It is worth noting that a polymer electrolyte membrane (PEM) was employed as to facilitate upscaling and diminish the corrosion observed employing the typical acidic or basic liquid electrolytes.