Software metrics plays an important role in measuring attributes that are critical to the success of a software project. Measurement of these attributes helps to make the characteristics and relationships between the attributes clearer. This in turn supports informed decision making. The field of software engineering is affected by infrequent, incomplete and inconsistent measurements. Software testing is an integral part of software development, providing opportunities for measurement of process attributes. The measurement of software testing process attributes enables the management to have better insight in to the software testing process. The aim of this thesis is to investigate the metric support for software test planning and test design processes. The study comprises of an extensive literature study and follows a methodical approach. This approach consists of two steps. The first step comprises of analyzing key phases in software testing life cycle, inputs required for starting the software test planning and design processes and metrics indicating the end of software test planning and test design processes. After establishing a basic understanding of the related concepts, the second step identifies the attributes of software test planning and test design processes including metric support for each of the identified attributes. The results of the literature survey showed that there are a number of different measurable attributes for software test planning and test design processes. The study partitioned these attributes in multiple categories for software test planning and test design processes. For each of these attributes, different existing measurements are studied. A consolidation of these measurements is presented in this thesis which is intended to provide an opportunity for management to consider improvement in these processes. / 00 92 51 4430327

Atualmente, os sistemas eletrônicos integrados seguem o paradigma do projeto baseado em núcleos de hardware. Além de núcleos digitais, tais sistemas podem incluir núcleos analógicos, que, neste caso, dominam os requisitos de teste, como tempo de teste e número adicional de pinos. Consequentemente, há um aumento do custo total de manufatura do dispositivo. O presente trabalho propõe o uso de técnicas de autoteste integrado (BIST) analógico, baseado no reuso de núcleos digitais presentes no mesmo sistema, com objetivo de reduzir os custos relativos ao teste do sistema. Além disso, uma estratégia satisfatória requer um adequado planejamento de teste, de forma a melhor explorar as possibilidades de teste simultâneo de mais de um núcleo e o escalonamento do teste de cada um destes, diminuindo custos associados ao teste. Adaptando uma ferramenta computacional voltada ao planejamento de sistemas compostos exclusivamente de núcleos digitais para o universo dos sistemas mistos e considerando a possibilidade do uso de BIST, pode-se avaliar o impacto da estratégia proposta em termos de tempo de teste, acréscimo de área em virtude das estruturas de teste e pinos extras. Restrições de dissipação de potência também são consideradas. Para validação das hipóteses levantadas, sistemas mistos foram descritos a partir de benchmarks industriais e acadêmicos puramente digitais, através da inclusão de núcleos analógicos. Os resultados obtidos através de simulações com a ferramenta apontam para uma redução no tempo de teste e otimização de custos de pinos e área, além da redução no custo de equipamentos automatizados de teste (ATE), para o caso de teste de produção. Com isso, uma redução no custo total do procedimento de teste de tais sistemas pode ser alcançada. / Currently, integrated electronic systems follow the core-based design paradigm. Such systems include not only digital circuits as internal blocks, but also analog circuits, which dominate test resources, such as testing time, extra pins and overhead area, thus increasing the total manufacture cost of these devices. The present work proposes the application of analog Built-in Self Test (BIST) techniques based on the reuse of available digital cores within the same integrated system, aiming to reduce the test costs of the analog cores. Moreover, a satisfactory strategy requires an adequate test planning, so that the design space is better explored. By adapting a software tool, which was originally designed for test planning of exclusively digital SOC, to consider analog cores, as well as the possibility of BIST, one can evaluate the impact of the proposed strategy in terms of test application time, area overhead due to test structures added and extra pins. Power dissipation restrictions may also be taken into account. In order to validate the hypotheses considered, mixed-signal systems are described from digital industrial and academic benchmarks, just adding analog cores. Through simulation with the adapted tool, the obtained results point to a decrease in the system test time, as well as a reduction in the cost of Automatic Test Equipment (ATE), in case of a production test. Thus, a reduction in the overall cost of the test procedure for such devices can be achieved.

Atualmente, os sistemas eletrônicos integrados seguem o paradigma do projeto baseado em núcleos de hardware. Além de núcleos digitais, tais sistemas podem incluir núcleos analógicos, que, neste caso, dominam os requisitos de teste, como tempo de teste e número adicional de pinos. Consequentemente, há um aumento do custo total de manufatura do dispositivo. O presente trabalho propõe o uso de técnicas de autoteste integrado (BIST) analógico, baseado no reuso de núcleos digitais presentes no mesmo sistema, com objetivo de reduzir os custos relativos ao teste do sistema. Além disso, uma estratégia satisfatória requer um adequado planejamento de teste, de forma a melhor explorar as possibilidades de teste simultâneo de mais de um núcleo e o escalonamento do teste de cada um destes, diminuindo custos associados ao teste. Adaptando uma ferramenta computacional voltada ao planejamento de sistemas compostos exclusivamente de núcleos digitais para o universo dos sistemas mistos e considerando a possibilidade do uso de BIST, pode-se avaliar o impacto da estratégia proposta em termos de tempo de teste, acréscimo de área em virtude das estruturas de teste e pinos extras. Restrições de dissipação de potência também são consideradas. Para validação das hipóteses levantadas, sistemas mistos foram descritos a partir de benchmarks industriais e acadêmicos puramente digitais, através da inclusão de núcleos analógicos. Os resultados obtidos através de simulações com a ferramenta apontam para uma redução no tempo de teste e otimização de custos de pinos e área, além da redução no custo de equipamentos automatizados de teste (ATE), para o caso de teste de produção. Com isso, uma redução no custo total do procedimento de teste de tais sistemas pode ser alcançada. / Currently, integrated electronic systems follow the core-based design paradigm. Such systems include not only digital circuits as internal blocks, but also analog circuits, which dominate test resources, such as testing time, extra pins and overhead area, thus increasing the total manufacture cost of these devices. The present work proposes the application of analog Built-in Self Test (BIST) techniques based on the reuse of available digital cores within the same integrated system, aiming to reduce the test costs of the analog cores. Moreover, a satisfactory strategy requires an adequate test planning, so that the design space is better explored. By adapting a software tool, which was originally designed for test planning of exclusively digital SOC, to consider analog cores, as well as the possibility of BIST, one can evaluate the impact of the proposed strategy in terms of test application time, area overhead due to test structures added and extra pins. Power dissipation restrictions may also be taken into account. In order to validate the hypotheses considered, mixed-signal systems are described from digital industrial and academic benchmarks, just adding analog cores. Through simulation with the adapted tool, the obtained results point to a decrease in the system test time, as well as a reduction in the cost of Automatic Test Equipment (ATE), in case of a production test. Thus, a reduction in the overall cost of the test procedure for such devices can be achieved.

Atualmente, os sistemas eletrônicos integrados seguem o paradigma do projeto baseado em núcleos de hardware. Além de núcleos digitais, tais sistemas podem incluir núcleos analógicos, que, neste caso, dominam os requisitos de teste, como tempo de teste e número adicional de pinos. Consequentemente, há um aumento do custo total de manufatura do dispositivo. O presente trabalho propõe o uso de técnicas de autoteste integrado (BIST) analógico, baseado no reuso de núcleos digitais presentes no mesmo sistema, com objetivo de reduzir os custos relativos ao teste do sistema. Além disso, uma estratégia satisfatória requer um adequado planejamento de teste, de forma a melhor explorar as possibilidades de teste simultâneo de mais de um núcleo e o escalonamento do teste de cada um destes, diminuindo custos associados ao teste. Adaptando uma ferramenta computacional voltada ao planejamento de sistemas compostos exclusivamente de núcleos digitais para o universo dos sistemas mistos e considerando a possibilidade do uso de BIST, pode-se avaliar o impacto da estratégia proposta em termos de tempo de teste, acréscimo de área em virtude das estruturas de teste e pinos extras. Restrições de dissipação de potência também são consideradas. Para validação das hipóteses levantadas, sistemas mistos foram descritos a partir de benchmarks industriais e acadêmicos puramente digitais, através da inclusão de núcleos analógicos. Os resultados obtidos através de simulações com a ferramenta apontam para uma redução no tempo de teste e otimização de custos de pinos e área, além da redução no custo de equipamentos automatizados de teste (ATE), para o caso de teste de produção. Com isso, uma redução no custo total do procedimento de teste de tais sistemas pode ser alcançada. / Currently, integrated electronic systems follow the core-based design paradigm. Such systems include not only digital circuits as internal blocks, but also analog circuits, which dominate test resources, such as testing time, extra pins and overhead area, thus increasing the total manufacture cost of these devices. The present work proposes the application of analog Built-in Self Test (BIST) techniques based on the reuse of available digital cores within the same integrated system, aiming to reduce the test costs of the analog cores. Moreover, a satisfactory strategy requires an adequate test planning, so that the design space is better explored. By adapting a software tool, which was originally designed for test planning of exclusively digital SOC, to consider analog cores, as well as the possibility of BIST, one can evaluate the impact of the proposed strategy in terms of test application time, area overhead due to test structures added and extra pins. Power dissipation restrictions may also be taken into account. In order to validate the hypotheses considered, mixed-signal systems are described from digital industrial and academic benchmarks, just adding analog cores. Through simulation with the adapted tool, the obtained results point to a decrease in the system test time, as well as a reduction in the cost of Automatic Test Equipment (ATE), in case of a production test. Thus, a reduction in the overall cost of the test procedure for such devices can be achieved.

Diploma thesis deals with the implementation of automated tests to the process of testing web applications. Introduction of the theoretical part is devoted to familiarizing the reader with the concept of testing and illustration of its importance not only in software development. Author then defines the term, introduces the principles, and attention is paid to the interpretation of terms which are commonly used in testing. The next section contains specific division of this process in terms of of the used techniques, methods and levels of testing. By description, and stating the fundamental differences between manual and automated testing creates conditions for understanding the issues, on which work is focused. At the end of theoretical part there are characterized basic models of software development life cycle, in which the process of testing has its place. In the practical part the author at first draws attention to introduction of of web application in which automated tests will be implemented. Subsequently, based on the introduced methodology, he analyzes the process of testing this application. He defines the reasons for the implementation of automated testing, he marks the areas of coveragecreates working team and the timetable for implementation. On the basis of established criteria justifies the choice of tools to be used in automation. In the next chapter he accompanies reader systematically across the entire process of creation and implementation of automated tests, and intentionally complements it with practical examples. End is devoted to assessment of the results that have been achieved by the implementation of automated tests. By comparing them with manual tests author determines the effectiveness of automation. Calculating the estimated savings is determined by the return on investment in automated tests.

Understanding the lifetime behavior of their products is crucial to the success of any company in the manufacturing and engineering industries. Statistical methods for lifetime data are a key component to achieving this level of understanding. Sometimes a statistical procedure must be updated to be adequate for modeling specific data as is discussed in Chapter 2. However, there are cases in which the methods used in industrial standards are themselves inadequate. This is distressing as more appropriate statistical methods are available but remain unused. The research in Chapter 4 deals with such a situation. The research in Chapter 3 serves as a combination of both scenarios and represents how both statisticians and engineers from the industry can join together to yield beautiful results. After introducing basic concepts and notation in Chapter 1, Chapter 2 focuses on lifetime prediction for a product consisting of multiple components. During the production period, some components may be upgraded or replaced, resulting in a new ``generation" of component. Incorporating this information into a competing risks model can greatly improve the accuracy of lifetime prediction. A generalized competing risks model is proposed and simulation is used to assess its performance. In Chapter 3, optimal and compromise test plans are proposed for constant amplitude fatigue testing. These test plans are based on a nonlinear physical model from the fatigue literature that is able to better capture the nonlinear behavior of fatigue life and account for effects from the testing environment. Sensitivity to the design parameters and modeling assumptions are investigated and suggestions for planning strategies are proposed. Chapter 4 considers the analysis of ADDT data for the purposes of estimating a thermal index. The current industry standards use a two-step procedure involving least squares regression in each step. The methodology preferred in the statistical literature is the maximum likelihood procedure. A comparison of the procedures is performed and two published datasets are used as motivating examples. The maximum likelihood procedure is presented as a more viable alternative to the two-step procedure due to its ability to quantify uncertainty in data inference and modeling flexibility. / Ph. D.

Most modern product development utilizes computational models. With increasing demands on reducing the product development lead-time, it becomes more important to improve the accuracy and efficiency of simulations. In addition, to improve product performance, a lot of products are designed to be lighter and more flexible, thus more prone to nonlinear behaviour. Linear finite element (FE) models, which still form the basis of numerical models used to represent mechanical structures, may not be able to predict structural behaviour with necessary accuracy when nonlinear effects are significant. Nonlinearities are often localized to joints or boundary conditions. Including nonlinear behaviour in FE-models introduces more sources of uncertainty and it is often necessary to calibrate the models with the use of experimental data. This research work presents a model calibration method that is suitable for mechanical systems with structural nonlinearities. The methodology concerns pre-test planning, parameterization, simulation methods, vibrational testing and optimization. The selection of parameters for the calibration requires physical insights together with analyses of the structure; the latter can be achieved by use of simulations. Traditional simulation methods may be computationally expensive when dealing with nonlinear systems; therefore an efficient fixed-step state-space based simulation method was developed. To gain knowledge of the accuracy of different simulation methods, the bias errors for the proposed method as well as other widespread simulation methods were studied and compared. The proposed method performs well in comparison to other simulation methods. To obtain precise estimates of the parameters, the test data should be informative of the parameters chosen and the parameters should be identifiable. Test data informativeness and parameter identifiability are coupled and they can be assessed by the Fisher information matrix (FIM). To optimize the informativeness of test data, a FIM based pre-test planning method was developed and a multi-sinusoidal excitation was designed. The steady-state responses at the side harmonics were shown to contain valuable information for model calibration of FE-models representing mechanical systems with structural nonlinearities. In this work, model calibration was made by minimizing the difference between predicted and measured multi-harmonic frequency response functions using an efficient optimization routine. The steady-state responses were calculated using the extended multi-harmonic balance method. When the parameters were calibrated, a k-fold cross validation was used to obtain parameter uncertainty. The proposed model calibration method was validated using two test-rigs, one with a geometrical nonlinearity and one with a clearance type of nonlinearity. To attain high quality data efficiently, the amplitude of the forcing harmonics was controlled at each frequency step by an off-line force feedback algorithm. The applied force was then measured and used in the numerical simulations of the responses. It was shown in the validation results that the predictions from the calibrated models agree well with the experimental results. In summary, the presented methodology concerns both theoretical and experimental aspects as it includes methods for pre-test planning, simulations, testing, calibration and validation. As such, this research work offers a complete framework and contributes to more effective and efficient analyses on mechanical systems with structural nonlinearities.

No description available.

Aus der Aufbereitungspraxis ist bekannt, dass für die industrielle Kalisalzgranulatherstellung das Kompaktier-/Zerkleinerungs-Verfahren ein bedeutungsvolles Verfahren ist. Deshalb ist die mathematische Optimierung der Prozesse Kompaktierung und Zerkleinerung sinnvoll. Hier ist die Optimierung mittels einer Modellierung der Prozesse Kompaktierung und Zerkleinerung erforderlich. Deshalb bestand die Aufgabe darin, ein Modell für die Prozesse Kompaktierung und Zerkleinerung auf Grund der mathematisch-statistischen Versuchsplanung wegen ihrer praktischen und ökonomischen Vorteile aufzustellen, um den gesamten Prozess Kaligranulatherstellung zu optimieren. Das aufgestellte Modell lässt sich für die Maximierung der Produktion qualitätsgerechten Granulates einer kompletten Granulieranlage bestehend aus Walzenpresse, Zerkleinerungsapparaten und Klassierapparat einsetzen. Damit ist es ein leistungsfähiges Werkzeug zur Effizienzsteigerung der Kaligranulatproduktion. Die Ergebnisse der Arbeit zeigen, dass die Verwendung der auf Grund der mathematisch-statistischen Versuchsplanung aufgestellten Modelle für die Optimierung der Verfahrenssysteme für die Kalisalzgranulatherstellung sinnvoll und nutzbar ist.

Aus der Aufbereitungspraxis ist bekannt, dass für die industrielle Kalisalzgranulatherstellung das Kompaktier-/Zerkleinerungs-Verfahren ein bedeutungsvolles Verfahren ist. Deshalb ist die mathematische Optimierung der Prozesse Kompaktierung und Zerkleinerung sinnvoll. Hier ist die Optimierung mittels einer Modellierung der Prozesse Kompaktierung und Zerkleinerung erforderlich. Deshalb bestand die Aufgabe darin, ein Modell für die Prozesse Kompaktierung und Zerkleinerung auf Grund der mathematisch-statistischen Versuchsplanung wegen ihrer praktischen und ökonomischen Vorteile aufzustellen, um den gesamten Prozess Kaligranulatherstellung zu optimieren. Das aufgestellte Modell lässt sich für die Maximierung der Produktion qualitätsgerechten Granulates einer kompletten Granulieranlage bestehend aus Walzenpresse, Zerkleinerungsapparaten und Klassierapparat einsetzen. Damit ist es ein leistungsfähiges Werkzeug zur Effizienzsteigerung der Kaligranulatproduktion. Die Ergebnisse der Arbeit zeigen, dass die Verwendung der auf Grund der mathematisch-statistischen Versuchsplanung aufgestellten Modelle für die Optimierung der Verfahrenssysteme für die Kalisalzgranulatherstellung sinnvoll und nutzbar ist.