The purpose of the diploma thesis is the design of condensing steam turbine for driving a compressor with mechanical power of 14,5 MW and operating speed 6800 rotations per minute on the compressor clutch. The main part is the thermodynamic calculation of the blade canal, which is verified with strength calculation to meet the requirements of the standart API 612. The next part is a basic design of gland sealing system, including a piston which is leveling the axial force with reusage of steam back to the blade canal. This thesis includes a calculation of axial and radial forces including the choice of suitable bearing, which both support the turbine. In the end there is an operating characteristics and function reliability of rising rotating speed on the total stress of blades.

The Diploma thesis named Steam Turbine 300 MW contains the proposal of the Turboset for the steam section of the gas-steam cycle. There is a calculation of the thermal cycle, and a thermodynamic calculation of the combined high pressure - as well as intermediate pressure and low pressure parts. Strength calculation of particular parts and a check of the critical turbine speed follow on from this. This thesis includes a drawing of the cross-section of HP-IP and partial operations. My thesis has been commissioned by Doosan Škoda Power.

This diploma thesis aims to thermodynamic calculation, carbon ring seal calculation and integrated gearbox calculation of single stage mechanicl drive steam turbine. The theoretical part of this work presents general classification of steam turbines, mechanicl drive steam turbine, types of blading and design of turbine seals. In the second part, we further discuss difference between carbon and labyrinth packing.

The aim of this diploma thesis is the design of a condensing steam turbine to drive a pump with a mechanical power of 9 MW. Based on the parameters, a thermodynamic design of the flow channel is performed, including the strength control of the blades, taking into account the API 612 standard. To compensate for the forces arising during operation, a thrust bearing and radial bearings are designed. At the end of the computational part of work, the operational characteristics of the turbine are performed. The appendix contains an idea drawing, which shows a section of the turbine.

In this master’s thesis, a preliminary thermodynamic calculation of the turbine is made. Then, the design and location of the vacuum breaker is devised for this turbine. The aim of the master’s thesis is to calculate a time needed to break the vacuum, ie to determine how long it takes to reach the atmospheric pressure inside the turbine and add-on devices. To verify and improve the accuracy of the calculation there are data measured on real projects used.

The aim of the master's thesis is the design of a condensing steam turbine to drive a compressor with specified parameters. Firstly, the thermodynamic calculation of the flow channels is made, which are verified by strength control to meet the API 612 standard. Following, the calculation for the axial and radial bearings, on which the turbine is mounted, is described and the operating characteristic is developed. Finally, a construction drawing of the longitudinal section of the steam turbine is attached.

The master’s thesis deals with the bypass system of steam turbine, especially about its heating during normal operation and cold start up. At the beginning of work, a preliminary thermodynamic calculation of condensing steam turbine with two uncontrolled extractions is made. This is followed by theoretical description and design of bypass system and design of heating during normal operation and cold start-up. The main goal of thesis is optimalization of heating, when the heating branch is connected back to turbine supply line. In the end, all options of heating are compared in terms of power output.

Condensing steam turbine. Master's thesis of master's studies of 2th years. This master's thesis is technical research. The contents of this technical research are an analysis of a mechanical equipment of that are used for condensing steam turbine, thermodynamic calculations of passage channel for specified inlet and outlet conditions of steam, design and construction, drawing of the turbine axial cross section, operating scheme of turbine and economic analysis of operation.

This thesis deals with the characteristics of natural gas and the problems of transport. Furthermore, this work deals with the most commonly used thermodynamic cycles, both steam and gas and their applications in the energy industry. The main part of this thesis focuses on the calculation of the thermodynamic properties of the gas, determine the minimum temperature gas after expansion in the turbine to prevent the formation of hydrates, design calculation of main dimensions and thermodynamic parameters of the expansion turbine on natural gas. As a final design will be drawn slice computed expansion turbine.

The aim of the master’s thesis is to design a condensing steam turbine based on given inputs. Firstly, a design and computation of heat balance is made, followed by thermodynamic calculation of steam turbine channel and a design of compensatory piston of axial forces. Last part of the thesis consists of a review of a change of cooling water temperature in condensator on last turbine stages. The structural drawing of longitudinal section of turbine is included as well.