This study investigates the global stiffness of a timer frame structure under wind loading using the finite element method by creating parameterized script files. Of key interest was the accuracy of the global stiffness determined from an adaptive 3D beam model in comparison to a 2D beam model and, the stiffness of a 3D beam model when subjected to different types of bracing in the presence of internal bracing provided by a lift shaft structure. Investigation of contact forces on the surfaces between the fastener and the timber at the connection was carried out and a design check for the specified bolts shear capacity done with respect to Eurocode 5. A 3D adaptive connection was created for a 2D frame model and the stiffness of the structure was studied. A comparison of the maximum displacement of the structure in the x direction, under the same wind loading, spring stiffness and boundary conditions, with a 2D beam structure without the adaptive connection initially showed a difference in the displacement. This implied that the rotational stiffness in the beam model was greater than that of the adaptive connection created. Therefore after altering the rotational stiffness of the beam model to achieve similar displacement as in the adaptive model, the rotational stiffness of the created connection was found to be 33.4 · 106Nm. The study also determined the contact forces generated at the surfaces between the fasteners and the timber using the finite element method to integrate over the surfaces and calculate the forces. The results were generated using the History Output in the step module. The only disadvantage of acquiring the contact forces was that, the contact surface simulation caused larger run times for the model to complete the time step. For the adaptive model it took 18 hours to complete each step. Further investigation into the stiffness of a 3D frame structure was conducted. The model of the 3D structure was created by a parameterized script which makes it easy to change input variables such as number of internal walls, geometry in x-z-plane, number of storeys, cross-sectional dimensions, material properties number of diagonals and location of diagonals. A variety of models with different conditions was analyzed. This showed that stiffness has a major impact on the magnitude of reaction forces and displacements.

With the acceleration of global urbanization trends, more and more intentions are put on multi-storey buildings. As the world leading area of wood construction, European countries started the construction of multi-storey timber building for a decade ago. However, unlike the traditional buildings made of reinforced concrete, the design of wooden high-rise timber buildings would face a substantial amount of new challenges because such high-rise timber buildings are touching the limitations of the timber engineering field. In this thesis, a parameterized three-dimensional FE-model (in ABAQUS) of a multi-storey timber frame building is created. Variable geometrical parameters, connection stiffness as well as boundary connections and applied wind and gravity loads are defined in a Python script to make it possible to analyze the influence of these parameters on the global structural behavior of the studied multi-storey timber frame building. The results and analysis implied that the script successfully worked and was capable to create different complex building geometries in an wasy way for the finite element analysis.