Ultrafast carrier dynamics studies have been carried out on samples with single layers of self-assembled In0.4Ga0.6As/GaAs quantum dots (QDs). Measurements were made using femtosecond degenerate pump-probe differential reflectivity with an 800-nm, 28-fs Ti-sapphire oscillator as the source. The QDs were grown via modified Stranski-Krastanov growth. This modified growth process consists of two steps: low-temperature growth and high-temperature annealing. Specifically, the InGaAs QD structures are fabricated on n-type GaAs(001) using molecular beam epitaxy. The InGaAs layer is deposited at 350-3700C followed by QD self assembly at 420-4900C. Finally, these QDs are capped with 10 nm or 100 nm of GaAs. The measured width and height of these QDs are typically 25 nm and 8 nm, respectively. Dots annealed at higher temperature have larger base area (width and length) and reduced height, as compared to those annealed at lower temperature. We have used a model consisting of a linear combination of an exponential decaying function to describe the carrier dynamics and fit the reflectivity data, revealing trends in the carrier capture and relaxation times associated with the InGaAs layer versus laser excitation level and QD morphology. Capture times are ~ 1 ps for the 100-nm capped samples, but slightly shorter for the 10-nm capped thin samples, indicating carrier transport plays a role in dynamics. The carrier dynamics in 10-nm capped samples are correlated with sample annealing temperature, indicating QD morphology affects carrier capture. Versus laser intensity, and thus carrier excitation level, the dynamics generally become slower, suggesting state filling is important in both the capture and relaxation of excited carriers in these samples.

This thesis deals with flow measuring techniques applied to steady and pulsating gas flows relevant to gas exchange systems for internal combustion engines. Gas flows in such environments are complex, i.e. they are inhomogeneous, three-dimensional, unsteady, non-isothermal and exhibit significant density changes. While a variety of flow metering devices are available and have been devised for such flow conditions, the performance of these flow metersis to a large extent undocumented when a strongly pulsatile motion is superposed on the already complex flow field. Nonetheless, gas flow meters are commonly applied in such environments, e.g. in the measurement of the air flow to the engine or the amount of exhaust gas recirculation. The aim of the present thesis is therefore to understand and assess, and if possible to improve the performance of various flow meters under highly pulsatile conditions as well as demonstrating the use of a new type of flow meter for measurements of the pulsating mass flow upstream and downstream the turbine of a turbocharger. The thesis can be subdivided into three parts. The first one assesses the flow quality of a newly developed flow rig, designed for measurements of steady and pulsating air flow at flow rates and pulse frequencies typically found in the gas exchange system of cars and smaller trucks. Flow rates and pulsation frequencies achieved and measured range up to about 200 g/s and 80 Hz, respectively. The time-resolved mass flux and stagnation temperature under both steady and pulsating conditions were characterized by means of a combined hot/cold-wire probe which is part of a newly developed automated measurement module. This rig and measurement module were used to create a unique data base with well-defined boundary conditions to be used for the validation of numerical simulations, but in particular, to assess the performance of various flow meters. In the second part a novel vortex flow meter that can measure the timedependent flow rate using wavelet analysis has been invented, verified and extensively tested under various industrially relevant conditions. The newly developed technique was used to provide unique turbine maps under pulsatile conditions through time-resolved and simultaneous measurements of mass flow, temperature and pressure upstream and downstream the turbine. Results confirm that the quasi-steady assumption is invalid for the turbine considered as a whole. In the third and last part of the thesis, two basic fundamental questions that arose during the course of hot/cold-wire measurements in the aforementioned high speed flows have been addressed, namely to assess which temperature a cold-wire measures or to which a hot-wire is exposed to in high speed flows as well as whether the hot-wire measures the product of velocity and density or total density. Hot/cold-wire measurements in a nozzle have been performed to test various hypothesis and results show that the recovery temperature as well as the product of velocity and stagnation density are measured. / QC 20120510

L'imagerie mono-pixel est un concept récent qui permet l'obtention d'images à un coût relativement faible par une compression des données durant l'acquisition. L'architecture d'une caméra mono-pixel comprend seulement deux éléments, un modulateur spatial de la lumière et un détecteur ponctuel. L'idée est de mesurer, au niveau du détecteur, la projection de la scène observée -l'image- avec un certain motif. Le post-traitement d'une séquence de mesures obtenues avec différents motifs permet de restaurer l'image de la scène. L'imagerie mono-pixel possède plusieurs avantages qui sont d'un intérêt pour différentes applications, en particulier dans le domaine biomédical. Par exemple, une caméra mono-pixel résolue en temps bas coût est bénéfique pour l'imagerie de temps de vie de fluorescence. Un tel système peut également être couplé à un spectromètre afin de compléter le temps de vie avec une information spectrale. Cependant, la limite principale de l'imagerie mono-pixel est la vitesse d'acquisition et/ou de l'étape de restauration d'image qui est, à ce jour, non compatible avec des applications temps réel. Le but de cette thèse est de développer des méthodes rapides d'acquisition et de restauration des images à visée d'applications biomédicales. Tout d'abord, une stratégie d'acquisition basée sur les algorithmes de compression dans le domaine ondelettes est proposée. Celle-ci accélère le temps de restauration de l'image par rapport aux schémas d'acquisition classiques basés sur l'acquisition comprimée. Dans un second temps, une nouvelle méthode pour lever une contrainte expérimentale de positivité sur les motifs est détaillée. Comparée aux approches classiques, cette méthode basée sur une factorisation en matrices non-négatives permet de diviser par deux le nombre de motifs envoyés au modulateur spatial de la lumière, entrainant ainsi une division par deux du temps d'acquisition total. Enfin, l'applicabilité de ces techniques est démontrée pour de l'imagerie multispectrale et/ou résolue en temps, modalités courantes dans le domaine biomédical. / Single-pixel imaging is a recent paradigm that allows the acquisition of images at a reasonably low cost by exploiting hardware compression of the data. The architecture of a single-pixel camera consists of only two elements, a spatial light modulator and a single point detector. The key idea is to measure, at the detector, the projection (i.e., inner product) of the scene under view -the image- with some patterns. The post-processing of a measurements sequence obtained with different patterns permits to restore the desired image. Single-pixel imaging has several advantages, which are of interest for different applications, especially in the biomedical field. In particular, a time-resolved single-pixel imaging system benefits to fluorescence lifetime sensing. Such a setup can be coupled to a spectrometer to supplement lifetime with spectral information. However, the main limitation of single-pixel imaging is the speed of the acquisition and/or image restoration that is, as of today, not compatible with real-time applications. This thesis investigates fast acquisition/restoration schemes for single-pixel camera targeting biomedical applications. First, a new acquisition strategy based on wavelet compression algorithms is reported. It is shown that it can significantly accelerate image recovery compared to conventional schemes belonging to the compressive sensing framework. Second, a novel technique is proposed to alleviate an experimental positivity constraint of the modulation patterns. With respect to the classical approaches, the proposed non-negative matrix factorization based technique permits to divide by two the number of patterns sent to the spatial light modulator, hence dividing the overall acquisition time by two. Finally, the applicability of these techniques is demonstrated for multispectral and/or time-resolved imaging, which are common modalities in biomedical imaging.

Au cours de la dernière décennie, un important effort a été fait dans le domaine des conducteurs électroniques de basse dimensionnalité afin de réaliser une électronique à électrons uniques. Une idée particulièrement attractive étant de pouvoir contrôler complétement la phase d’un électron unique volant pour transporter et manipuler de l’information quantique dans le but de construire un qubit volant. L’injection contrôlée d’électrons uniques dans un système électronique bidimensionnel balistique peut être fait grâce à une source d’électrons uniques basée sur des pulses de tensions lorentziens sub-nanosecondes. Une telle source peut aussi être utilisée pour mettre en évidence de nouveaux phénomènes d’interférences électroniques. Lorsqu’un pulse de tension court est injecté dans un interféromètre électronique, de nouveaux effets d’interférences sont attendus du fait de l’interaction du pulse avec les électrons de la mer de Fermi. Pour la réalisation de cette expérience, il est important de connaître avec précision la vitesse de propagation du paquet d’onde électronique créé par le pulse.Dans cette thèse, nous présentons des mesures résolues en temps d’un pulse de tension court (<100 ps) injecté dans un fil quantique 1D formé dans gaz d’électron bidimensionnel qui nous ont permis de déterminer sa vitesse de propagation. Nous montrons que le pulse se propage bien plus vite que la vitesse de Fermi d’un système sans interaction. La vitesse de propagation est augmentée par les interactions électron-électron. Pour un fil quantique contenant un grand nombre de modes, la vitesse mesurée est en excellent accord avec la vitesse d’un plasmon dans un système 2D en présence de grilles métalliques. En modifiant le potentiel de confinement électrostatique et donc l’intensité des interactions, nous montrons qu’il est possible de contrôler la vitesse de propagation. Nous avons ensuite étudié un interféromètre électronique à deux chemins basé sur deux fils couplés par une barrière tunnel. Nos mesures préliminaires font ressortir une signature qui peut être attribuée à des oscillations tunnel cohérentes des électrons injectés dans ce système. Dans un future proche, cet interféromètre pourrait être utilisé pour mettre en évidence ces nouveaux effets spectaculaires dus à l’interaction du pulse avec les électrons de la mer de Fermi. / Over the past decade, an important effort has been made in the field of low dimensional electronic conductors towards single electron electronics with the goal to gain full control of the phase of a single electron in a solid-state system. A particular appealing idea is to use a single flying electron itself to carry and manipulate the quantum information, the so-called solid state flying qubit. On demand single electron injection into such a ballistic two-dimensional electron system can be realized by employing the recently developed single electron source based on sub-nanosecond lorentzian voltage pulses. Such a source could also be used to reveal interesting new physics. When a short voltage pulse is injected in an electronic interferometer, novel interference effects are expected due to the interference of the pulse with the surrounding Fermi sea. For the realization of such experiments it is important to know with high accuracy the propagation velocity of the electron wave packet created by the pulse.In this thesis, we present time resolved measurements of a short voltage pulse (<100 ps) injected into a 1D quantum wire formed in a two-dimensional electron gas and determine its propagation speed. We show that the voltage pulse propagates much faster than the Fermi velocity of a non-interacting system. The propagation speed is enhanced due to electron interactions within the quantum wire. For a quantum wire containing a large number of modes, the measured propagation velocity agrees very well with the 2D plasmon velocity for a gated two-dimensional electron gas. Increasing the confinement potential allows to control the strength of the electron interactions and hence the propagation speed. We then have studied an electronic two-path interferometer based on two tunnel-coupled wires. Our preliminary measurements show a signature that can be attributed to the coherent tunneling of the electrons injected into this system. In the near future, this system could be used to reveal these new striking effects due to the interaction of the voltage pulse with the Fermi sea.