Tato disertační práce analyzuje artefakty v NMR obrazech. V lékařské praxi mohou artefakty zabránit diagnostice patologických tkání, a proto je třeba tyto nežádoucí jevy odstranit. Vzhledem k nutnosti vyloučit artefakty způsobené nehomogenitou statického magnetického pole jsou v dané souvislosti diskutovány také nové možnosti měření deformací. Práce popisuje metodu pro měření základního pole i RF pole a jejich nehomogenit na základě měření MR obrazů T2 a T2*. Metoda kombinuje akviziční postupy pro spinové a gradientní echo za účelem rozlišení relaxačních časů T2 a T2*. V této souvislosti také vyvstává potřeba provést exponenciální aproximaci relaxačního procesu. Experimentální výsledky pro plastové i měděné vzorky jsou prezentovány v příslušné části práce. Pokud jde o vlastní členení popisovaných jevů, je třeba uvést, že významný problém představují artefakty způsobené magnetickou susceptibilitou. Různé hodnoty magnetické vodivosti na rozhraní mezi dvěma materiály mohou způsobit deformaci magnetického pole, přičemž může dojít i k úplné ztrátě signálu.

GPR data interpretation is often difficult due to complex geological environments, reflections ambiguity and time-depth conversion uncertainty. Thanks to the geophysical fields interoperability it is possible to compare results of related survey methods. Radargrams from three model sites were processed and interpreted in an usual way to uniformly amplify all recorded reflections. Results were compared with ERT and EM (DEMP) data within integrated interpretation. GPR data interpretation was extended and new geological and geomorphological interpretations were uncovered. The GPR processing sequence was modified and simplified following outcomes from the integrated interpretation to ease different methods results comparison. Adapting a velocity model to precise time- depth conversion hasn't showed improvements. Key words: ground penetrating radar, electrical resistivity tomography, dipole electromagnetic profiling, integrated interpretation, integrated inversion, GPR processing optimization, sedimentary environment, velocity model

PALEOFLUID CHEMISTRY OF OROGENIC GOLD DEPOSITS: NOVEL ANALYTICAL METHODS AND CASE STUDIES FROM THE BOHEMIAN MASSIF Tomáš Hrstka1 1 Charles University in Prague, Faculty of Science, Institute of Geochemistry, Mineralogy and Mineral Resources, Albertov 6, Praha 2, CZ-128 43 Abstract of the Ph.D. Thesis Fluid inclusions represent a unique tool for understanding the processes leading to the formation of mineral deposits and fluid-rock interactions in general. Orogenic gold deposits in the central part of the Bohemian Massif (Libčice and Kasejovice deposits) were studied in order to provide a better understanding of their genesis. A multifaceted approach was adopted including a broad spectrum of micro-analytical methods. While traditional methods were used as the basis of this study (e.g., microthermometry, SEM and optical microscopy), the application and improvement/development of modern analytical methods (e.g., LA-ICP- MS and Raman spectroscopy) or introduction of alternative innovative techniques (CLSM, Nano- tomography, QEMSCAN) constituted a significant part of this study. This study reveals the importance of the HCO3 - species in hydrothermal fluids (i.e., >100 řC to ~350 řC). Previously, the prevalence of Cl- and other anions was reported for hydrothermal paleofluids and the majority of studies suggested...

title: Surface Wave Analysis and Inversion Application to the Bohemian Massif author: Mgr. Petr Kolínský, DiS. author's e-mail address: kolinsky@irsm.cas.cz departments: Department of Geophysics Faculty of Mathematics and Physics Charles University Prague V Holešovičkách 2, Praha 8 - 180 00, Czech Republic and Department of Seismology Institute of Rock Structure and Mechanics, v.v.i. Academy of Sciences of the Czech Republic V Holešovičkách 41, Praha 8 - 182 09, Czech Republic supervisor: RNDr. Johana Brokešová, CSc. supervisor's e-mail address: johana.brokesova@mff.cuni.cz consultant: RNDr. Jiří Málek, PhD. consultant's e-mail address: malek@irsm.cas.cz keywords: surface waves, group velocity, phase velocity, frequency-time analysis, multiple filtering, tomography, inversion problems, Earth crust structure, Bohemian Massif An overview of surface wave analysis methods as well as of inversion techniques is given. Special attention is paid to the multiple filtering method for dispersion curve estimation, which is described by two different ways in detail. The isometric method is used for dispersion curve inversion and its description and tests are presented. Described methods are further used in applications. The applications show examples of surface wave analysis and inversion for 1D and 2D...

This diploma thesis deals with reduction of metal artifacts in CT data with submicron resolution. The first part of this thesis briefly describes x-ray computed tomography followed by the description of artifacts of tomographic images and existing approaches of the reduction of metal artifacts. In the second part proposed methods of reduction of metal artifacts and their implementation in Matlab programming environment are described. Finally functionality of algorithms is tested on a newly created database and the results are compared, evaluated and discussed.

Concretes reinforced by, using distributed steel reinforcements (fibres) are known as fibre-concrete. In case of disturbances or accidents of concrete structures reinforced with wires, it is necessary to carefully examine the actual implementation of dispersed reinforcement. Fibre concretes belong to modern building materials whose possible applications have not been fully utilized so far. Have been mainly used for floor structures loaded with factory halls and warehouses. Recently, thanks to well-known physical and mechanical properties of fibre-concrete, there were numerous attempts of designers, and namely investors, to utilize this kind of materials for support structures either. Favorable properties of wire-concrete can be utilized if there is a necessity to increase the resistance of concrete to stresses exceeding its strength, cyclic stress or impact stress. Daily practice shows to prove that the applications of fibre-concrete in such structures lead to the economic success. Necessary condition for successful application of steel fiber reinforced concrete in constructions however consists in its uniform dispersion, a homogeneous distribution of the wires throughout the volume of the structure. In case of inappropriate processing and deposition of the mixture during the manufacturing process fiber-concrete structures, the fibers are often unevenly distributed. Wires itself represent unfavourably shaped mixture components and they are extremely deteriorating its workability. A grouping of wires may be encountered as well, which reduces the overall homogeneity and the quality of steel fiber-concrete structures. If the homogeneity of fibre-concrete is not kept, the material possess different properties in various parts of the structure (for example, tensile strength), which can lead to defects in the structure (generation and development of cracks). The relevant lower reliability of the structure which is caused by unequal distribution of fibres (wires) in concrete volume can lead to damage of the property as well as the safety and the human lives can be jeopardized. Hence it is necessary to secure the effective control of the fibre-concrete homogeneity in ready support fibre-concrete structures. Contemporary homogeneity control is still ongoing on fresh blends, but if the fibre-concrete hardened and is a part of the construction, no known reliable methods are currently in available to test the homogeneity of the fibre-concrete on the structure without its destruction. The methods developed to control the concentration of wires in wire-concrete structures are based mostly on magnetic or electromagnetic properties of wires. The thesis deals with the development of the magnetic method in situ using permanent magnets for monitoring the distribution of fibers in hardened steel fiber-concrete structures. The test principle is based on measurements of the changes in magnetic field strength of permanent magnets which are induced by a change in wire distribution in steel fibre-concrete structure. Test is characterized as a so called local- failure- test using a small diameter core drill. In this sense it is a semi-destructive method.

This thesis deals with a design of a power supply for a measuring equipment for a geophysical mapping intended to do a reconstruction of an electrical impedance of a ground environment of water reservoirs. The power source is going to be used for laboratory measurements and for outdoor experiments. The thesis describes the selection of suitable components, equipment design and testing. The theoretical part explains the functions of used components and the principle of an electrical impedance tomography. The conclusion summarizes the properties of the proposed solution and evaluates the final product.

The work analyses formation of deformations of RF magnetic field within the environment of electrically and magnetically conductive materials. An analytic solution of the problem is created and the problems of numerical modeling are solved. In theoretical way, the work also familiarize with the use of magnetic resonance imaging method - the spin echo method (SE), with its features and possibilities of its use within the aim of the project. This method is used for experimental measurements of electrically conductive materials in the NMR laboratory in ISI AV Czech Republic. Results of the simulation are compared with results of the experimental measurement.

X-Ray Computed Tomography is irreplaceable medical imaging system. Quantitative evaluation is day to day routine used for clean run of this imaging system. The master’s thesis is focused on quantitative evaluation of first and third generation X-Ray CT. First of all is about subjective and objective evaluation of space and energetic resolution. Space resolution is evaluated in space and frequency domain. Energetic resolution is represent by low contrast resolution method. Application “Kvantitativní hodnocení kvality CT RTG zobrazení” created for this thesis is used for creation of reconstruction image and quantitative evaluation. This application was created with consideration of its usage in subjects about image processing. The master’s thesis contains results of quantitative evaluation X-Ray CT created with this application and proposal of lab work.

This work deals with possibilities of registration of retinal images from different mo-dalities, concretely optical coherence tomography (OCT), scanning laser ophthalmoscopy (SLO) and fundus camera. In first stage is the interest focused on registration of SLO and fundus images, which will serve to determine area of interest for consecutive registration of OCT data. The final stage is finding correct location of OCT B-scans in fundus image. On the basis of the studied methods of registration was chosen method making use of computation of correlation coefficient for both cases. For finding optimal parameters of registration is used searching through whole space of parameters. In partial stages of the work was created algorithm for alignment of B-scans followed by detection of blood vessels and also simple algorithm for detection of blood vessels from fundus image. For more transparent registration the graphical user interface was created, which allows loading input images and displaying the result in several possible forms.