Oceanographers are currently investigating small-scale ocean turbulence to understand how to better model the ocean. To measure ocean turbulence, one must measure fluid velocity with great precision. The three components of velocity can be used to compute the turbulent kinetic energy dissipation rate. Fluid velocity can be measured using a five-beam acoustic Doppler current profiler (VADCP). The VADCP needs to maintain a tilt-free attitude so the turbulent kinetic energy dissipation rate can be accurately computed to observe small-scale ocean turbulence in a vertical column. To provide attitude stability, the sensor may be towed behind a research vessel, with a depressor fixed somewhere along the length of the towing cable. This type of setup is known as a two-part towing arrangement. This thesis examines the dynamics, stability and control of the two-part tow. A Simulink simulation that models the towfish dynamics was implemented. Through this Simulink simulation a parametric study was conducted to see the effects of sea state, towing speed, center of gravity position, and a PID controller on the towfish dynamics. A detailed static analysis of the towing cable's effects on the towfish enhanced this dynamic model. The thesis also describes vehicle design and fabrication, including procedures for trimming and ballasting the towfish. / Master of Science

Sampling small scale ocean turbulence is one of the most important problems in oceanography. The turbulence can be near the noise level of current microscale profiling techniques and these techniques do not provide spatially and temporally dense measurements and can be labor intensive. A 5 beam acoustic Doppler current profiler (VADCP) can more accurately measure three components of fluid velocity in a column. By towing such a device in a sensor platform, called a towfish, one may measure turbulent mixing in a vertical swath of the ocean. If the towfish attitude is not precisely regulated, however, the turbulence measurements can be irreversibly corrupted. A two-part tow that includes a depressor weight between the towing vessel and the towfish can provide some degree of disturbance rejection. Passive devices alone, however, can not meet the performance requirements for measuring ocean turbulence. This thesis presents a design for a two-stage towing system which will be used to measure ocean turbulence. The focus is on the towfish, which includes independently actuated stern planes for pitch and roll disturbance rejection. The thesis also describes design and analysis of an active control system to precisely regulate the pitch and roll attitude of a streamlined towfish. A three dimensional numerical model is presented and a PID controller is developed to provide active attitude stabilization. The effect of random depressor motions on the towfish dynamics is assessed for both the uncontrolled and the feedback-controlled case. The numerical investigation also considers variations in parameters such as tether length and CG location. / Master of Science