No description available.

No description available.

>Magister Scientiae - MSc / Electrochemical platforms were developed based on pencil graphite electrodes (PGEs) modified with electrochemically deposited graphene (EG) sheets and Nafion-graphene (NG) nanocomposites in conjunction with an in situ plated bismuth-film (EG-PG-BiE and NG-PG-BiE). The EG- and NG-PG-BiEs were used as sensing platforms for determining Zn2+, Cd2+ and Pb2+ by square wave anodic stripping voltammetry (SWASV). EG sheets were deposited onto pencil graphite electrodes by cyclic voltammetric reduction from a graphene oxide (GO) solution, while a dip coating method was used to prepare the NG-PG-BiE. The GO and graphene, with flake thicknesses of 1.78 (2 sheets) and 2.10 nm (5 sheets) respectively, was characterized using FT-IR, HR-SEM, HR-TEM, AFM, XRD and Raman spectroscopy. Parameters influencing the electroanalytical response of the EG-PG-BiE and NG-PG-BiE such as, bismuth ion concentration, deposition potential, deposition time and rotation speed were investigated and optimized. The EG-PG-BiE gave well-defined, reproducible peaks with detection limits of 0.19 μg L-1, 0.09 μg L-1 and 0.12 μg L-1 for Zn2+, Cd2+ and Pb2+ respectively, at a deposition time of 120 seconds. The NG-PG-BiE showed similar detection limits of 0.167 μg L-1, 0.098 μg L-1 and 0.125 μg L-1 for Zn2+, Cd2+ and Pb2+ respectively. For real sample analysis, the enhanced voltammetric sensor proved to be suitable for the detection and quantitation of heavy metals below the US EPA prescribed drinking water standards of 5 mg L-1, 5 μg L-1 and 15 μg L-1 for Zn2+, Cd2+ and Pb2+ respectively.

>Magister Scientiae - MSc / This work reports the use of a pencil graphite electrode (PGE) as inexpensive and sensitive electrochemical sensing platform fabricated by using electrochemically reduced graphene oxide (ERGO) in conjunction with an in-situ plated thin mercury film. For the first time the ERGOHgF-PGE sensor is proposed for simultaneous detection of cadmium (Cd2+), copper (Cu2+), lead (Pb2+) and zinc (Zn2+) using N-Nitroso-N-phenylhydroxylamine (cupferron) as complexing agent by square-wave adsorptive cathodic stripping voltammetry (SW-AdCSV). The technique is based on the adsorption of cupferron- metal ion complexes onto the surface of the ERGO-HgFPGE at 0.1 V for 60 s carried out in 0.1 M acetate buffer solution (pH 4.6). The synthesized graphene oxide (GO) and graphene nanosheets (GNs) were characterized using different analytical techniques such as FT-IR which confirms the presence of oxygen moieties embedded in the graphitic structure and further demonstrated by UV-Vis, validating the synthesis of GO / 2023

Magister Scientiae - MSc (Chemistry) / In this study, graphene oxide was synthesized by oxidizing graphite using the modified Hummer's method. The graphene oxide was characterized by Raman Spectroscopy, Fourier Transform Infrared Spectroscopy, High Resolution Transmission Electron Microscopy, Scanning Electron Microscopy and X-Ray Diffraction for structural and morphological properties. The graphene oxide was electrochemically reduced on a carbon paste electrode followed by the in situ deposition of mercury thin films to achieve electrochemically reduced graphene oxide modified carbon paste metal film electrodes (ERGO-CP-MEs). The experimental parameters (amplitude, deposition time, deposition potential, frequency and rotation speed) were optimized, and the applicability of the modified electrode was investigated towards the simultaneous and individual determination of TI1+ and In3+ at the low concentration levels (?g L-1) in 0.1 M acetate buffer (pH 4.6) using square wave anodic stripping voltammetry (SWASV). The detection limit values for individual analysis at electrochemically reduced graphene oxide modified carbon paste mercury film electrode (ERGO-CP-HgE ) was 2.4 and 1.1 ?g L-1 for TI1+ and In3+, respectively. The detection limit values for simultaneous analysis at ERGO-CPE was 1.32 and 1.33 ?g L-1 and individual analysis was 0.975 and 1.04 ?g L-1 for TI1+ and In3+, respectively.

This study reports the synthesis of graphene by oxidizing graphite to graphite oxide using H2SO4 and KMnO4 and reducing graphene oxide to graphene by using NaBH4. Graphene was then characterized using FT-IR, TEM, AFM, XRD, Raman spectroscopy and solid state NMR. Nafion-Graphene in combination with a mercury film electrode, bismuth film electrode and antimony film electrode was used as a sensing platform for trace metal analysis in 0.1 M acetate buffer (pH 4.6) at 120 s deposition time, using square-wave anodic stripping voltammetry (SWASV). Detection limits were calculated using 3σblank/slope. For practical applications recovery studies was done by spiking test samples with known concentrations of metal ions and comparing the results to inductively coupled plasma mass spectrometry (ICPMS). This was then followed by real sample analyses.

This study reports the synthesis of graphene by oxidizing graphite to graphite oxide using H2SO4 and KMnO4 and reducing graphene oxide to graphene by using NaBH4. Graphene was then characterized using FT-IR, TEM, AFM, XRD, Raman spectroscopy and solid state NMR. Nafion-Graphene in combination with a mercury film electrode, bismuth film electrode and antimony film electrode was used as a sensing platform for trace metal analysis in 0.1 M acetate buffer (pH 4.6) at 120 s deposition time, using square-wave anodic stripping voltammetry (SWASV). Detection limits were calculated using 3σblank/slope. For practical applications recovery studies was done by spiking test samples with known concentrations of metal ions and comparing the results to inductively coupled plasma mass spectrometry (ICPMS). This was then followed by real sample analyses.

Philosophiae Doctor - PhD / The need for clean, non-toxic drinking water supplies, free of pollutants and metal contamination is vital in impoverished areas and the developing world alike. With this in mind, the development of accurate, inexpensive, portable and simple devices for remote sensing applications is therefore pivotal for early detection and the prevention of illnesses. Over the last two decades, adsorptive stripping voltammetry (AdSV) has emerged as a superior detection method over common analytical techniques due to its low-cost instrumentation, unskilled labour and ability to detect a wide range of analytes. / 2020-08-31

Magister Scientiae - MSc (Dept. of Chemistry) / This study reports the synthesis of graphene by oxidizing graphite to graphite oxide using H2SO4 and KMnO4 and reducing graphene oxide to graphene by using NaBH4. Graphene was then characterized using FT-IR, TEM, AFM, XRD, Raman spectroscopy and solid state NMR. Nafion-Graphene in combination with a mercury film electrode, bismuth film electrode and antimony film electrode was used as a sensing platform for trace metal analysis in 0.1 M acetate buffer (pH 4.6) at 120 s deposition time, using square-wave anodic stripping voltammetry (SWASV). Detection limits were calculated using 3σblank/slope. For practical applications recovery studies was done by spiking test samples with known concentrations of metal ions and comparing the results to inductively coupled plasma mass spectrometry (ICPMS). This was then followed by real sample analyses. / South Africa

Magister Scientiae - MSc / In this study multilayer graphene nanosheets was synthesize by oxidizing graphite to graphene oxide using H2SO4 and KMnO4 followed by reduction of graphene oxide to graphene using NaBH4. The graphene nanosheets were characterized by Fourier Transform Infrared (FTIR) and Raman spectroscopy, high resolution transmission electron microscopy (HRTEM), Scanning electron microscopy (SEM) and X-ray diffraction (XRD). HRTEM images showed that the multilayer graphene were obtained. The graphene was immobilized directly onto a glassy carbon electrode using the drop coating technique followed by the in situ deposition of mercury, bismuth or antimony thin films to afford graphene modified glassy carbon metal film electrodes (Gr-GC-MEs). The experimental parameters (deposition potential, deposition time, rotation speed, frequency and amplitude) were optimized, and the applicability of the modified electrode was investigated towards the individual and simultaneous determination of Zn2+, Cd2+ and Pb2+ at the low concentration levels (μg L-1) in 0.1 M acetate buffer (pH 4.6) using square wave anodic stripping voltammetry (SWASV). The detection limits values for the Gr-GC-HgE was 0.08, 0.05 and 0.14 μg L-1 for Zn2+, Cd2+ and Pb2+, respectively. The Gr-GC-BiE the detection limits for was 0.12, 0.22 and 0.28 μg L-1 for Zn2+, Cd2+ and Pb2+ while the detection limits for the Gr-GC-SbE was 0.1, 0.3 and 0.3 μg L-1 for Zn2+, Cd2+ and Pb2+, respectively. A Gr-GCE prepared without any binding agents or metal film had detection limits for Zn2+, Cd2+ and Pb2+ of 3.9, 0.8 and 0.2 μg L-1 for Zn2+, Cd2+ and Pb2+. Real sample analysis of which was laboratory tap water was performed using the Gr-GCMEs. Only Gr-GC-HgE was sensitive enough to detect metal ions in the tap water samples at the 3ppb level whereas, the GC-BiE and GC-SbE detected the metal ions at the 10 μg L-1 to 30 μg L-1 level.