This report intends to impart a good understanding of routing modules used in modern transceiver systems. The radar system at RadarBolaget AB needed to have a good routing module for its newly designed transceiver antenna. In this report, studies have been done related to two majorly used routing modules in modern electronics industry; Microwave Circulator and RF/Microwave Switch. First off, different characteristics of routing modules are discussed. After having discussed important design parameters, practical design considerations for two routing modules are presented in a profound way. Theoretical knowledge for both of these two devices is presented in the beginning, followed by their practical designs using standard simulation software like HFSS and ADS. The report concludes its findings in a way that at the end of this report, reader becomes acquainted with ample information to be able to choose the best option available among all of the discussed designs. An FET RF Switch is chosen at the end of this project to be used for transceiver system which should be able to satisfy specifications specified by RadarBolaget AB. This project was carried out by two students of Master Program in Electronics/Telecommunications at Högskolan i Gävle in collaboration with RadarBolaget AB, Gävle, Sweden.

Carrierless amplitude and phase (CAP) modulation is generally regarded as a bandwidth efficient two-dimensional (2-D) passband line code. It is closely related to the pulse amplitude modulation (PAM) and quadrature amplitude modulation (QAM) schemes. CAP has been proposed for various digital subscriber loop (DSL) systems over unshielded twisted pairs of copper wires. In this thesis, our main focus is on the minimum mean-square error (MMSE) performance of the ideal (i.e., infinite length) linear and non-linear (decision feedback) CAP receivers/equalisers in the presence of additive, coloured Gaussian noise, and/or data-like cross-talks. An in-depth analysis is given on the performance of both receiver structures. In the case of the linear receiver, one possible view of the overall CAP transceiver system which includes both data and cross-talk transmission paths is that it is a linear multiple-input multiple-output (MIMO) system. Accordingly, the existing MMSE results for a general MIMO system are applicable also to CAP systems. However, up to date, this approach was shown to be unsuccessful in the sense that the derived MMSE expressions are too complex and offer little insights. In our analysis, in order to find a more incisive MMSE expression, we reconsider the problem of minimisation of the MSEs at slicers. By exploiting the Hilbert transform pair relationship between the impulse responses of the inphase and quadrature transmit shaping filters, we are able to obtain an elegant and more meaningful MMSE expression, as well as the corresponding transfer functions of the optimum linear receive filters. In the case of the nonlinear, or decision feedback equaliser (DFE), receiver, we start our analysis with the receiver structure of a generic multidimensional (>/= 3) CAP-type system. / This receiver consists of a bank of analog receive filters, the number of which equals the dimension of the CAP line code, and a matrix of cross-connected, infinite-length, baud-spaced feedback filters. It is shown that the optimum filters and the corresponding MMSE of the DFE receiver require the factorisation of a discrete-time channel spectral matrix. This mathematically intractable step can be avoided, however, when the DFE results are specialised to a standard 2-D CAP system where we are able to again exploit the Hilbert transform pair relationship to derive a further and more useful MMSE expression. Three sets of numerical studies are given on the MMSE performance of the CAP receivers. In the first set of studies. we model the sum of all crosstalks as an additive, Gaussian noise source and select three test transmission channels over which we compare the MMSE performance of the linear and DFE receiver structures. In the second set of studies, we compare the performance of the two receiver structures, but in a data-like cross-talk environment. The results demonstrate the importance of NEXT equalisation in the design of CAP receivers operating in a NEXT dominant environment. In the final set of studies which follows from the second set of studies, we investigate the relationship between the MMSE performance of the DFE receiver and system parameters which include excess bandwidth, data rate, CAP scheme. and relative phase between the received signal and the NEXT signal. The results show that data-like cross-talks can be effectively suppressed by using a large excess bandwidth (alpha > 1 in the case of a RC transmit shaping filter) alone. / The relative phase also affect; the receiver performance. but to a lesser degree. In addition to the MMSE performance analysis. implementation issues of an adaptive linear CAP receiver are also considered. We propose a novel linear receiver by appending two fixed analog filters to the front-end of the existing adaptive linear receiver using fractionally-spaced equalisers (FSE). We show that if the analog filters are matched to the transmit shaping filters, then inphase and quadrature finite-length FSEs in the proposed receiver have the same NINISE solution. We further propose a modified least-mean-square (LMS) algorithm which takes advantage of this feature. The convergence analysis of the proposed LMS algorithm is also given. We show that the modified LMS algorithm converges approximately twice as fast as the standard LMS algorithm, given the same misadjustment, or alternatively, it halves the misadjustment, given the same initial convergence rate.

The mobile wireless communication systems has been growing fast and continuously over the past two decades. Therefore, in order to fulfill the demand for this rapid growth, the standardization bodies along with wireless researchers and mobile operators around the world have been constantly working on new technical specifications.An important problem in modern communication is known as NP complete problem in the Maximum Likelihood (ML) detection of signals transmitting over Multiple Input Multiple Output channel of the OFDM transceiver system. Development of the Sphere Decoder (SD) as a result of the rapid advancement in signal processing techniques provides ML detection for MIMO channels at polynomial time complexity average case. There are weaknesses in the existing SDs. The sphere decoder performance is very sensitive for the most current proposals in order to choose the search radius parameter. At high spectral efficiencies SNR is low or as the problem dimension is high and the complexity coefficient can become very large too. Digital communications of detecting a vector of symbols has importance as, is encountered in several different applications. These symbols are as the finite alphabet and transmitted over a multiple-input multiple-output (MIMO) channel with Gaussian noise. There are no limitation to the detection of symbols spatially multiplexed over a multiple-antenna channel and the multi user detection problem. Efficient algorithms are considered for the detection problems and have recognized well. The algorithm of sphere decoder, orders has optimal performance considering the error probability and this has proved extremely efficient in terms of computational complexity for moderately sized problems in case of signal to noise ratio. At high SNR the algorithm has a polynomial average complexity and it is understood the algorithm has an exponential worst case complexity. The efficiency of the algorithm is ordered the exponential rate derivation of growth. Complexity is positive for the finite SNR and small in the high SNR. To achieve the sphere decoding solution applying Schnorr-Euchner by Maximum likelihood method , Depth-first Stack-based Sequential decoding is used. This thesis focuses on the receiver part of the transceiver system and takes a good look at the near optimal algorithm for sphere detection of a vector of symbols transmitted over MIMO channel. The analysis and algorithms are general in nature. / Cell:+8801553448014

Our society increasingly relies on the transmission and reception of vast amounts of data using serial connections featuring ever-increasing bit rates. In imaging systems, for example, the frame rate achievable is often limited by the serial link between camera and host even when modern serial buses with the highest bit rates are used. This thesis documents a scalable embedded transceiver system with a bandwidth and interface standard that can be adapted to suit a particular application. This new approach for a real-time scalable embedded transceiver system is referred to as a Novel Reference Model (NRM), which connects two or more applications through a transceiver network in order to provide real-time data to a host system. Different transceiver interfaces for which the NRM model has been tested include: LVDS, GIGE, PMA-direct, Rapid-IO and XAUI, one support a specific range for transceiver speed that suites a special type for transceiver physical medium. The scalable serial link approach has been extended with loss-less data compression with the aim of further increasing dataflow at a given bit rate. Two lossless compression methods were implemented, based on Huffman coding and a novel method called Reduced Lossless Compression Method (RLCM). Both methods are integrated into the scalable transceivers providing a comprehensive solution for optimal data transmission over a variety of different interfaces. The NRM is implemented on a field programmable gate array (FPGA) using a system architecture that consists of three layers: application, transport and physical. A Terasic DE4 board was used as the main platform for implementing and testing the embedded system, while Quartus-II software and tools were used to design and debug the embedded hardware systems.