Spelling suggestions: "subject:"2transition amodeling"" "subject:"2transition emodeling""
1 |
Design and Analysis of Low Reynolds Number Marine Propellers with Computational Fluid Dynamics (CFD) Transition ModelingWebster, John Ackroyd III 12 August 2019 (has links)
Small-scale marine propellers operate at low Reynolds numbers, where laminar-turbulent transition of the boundary layer can impact the distributions of pressure and shear stress on the blade surface. Marine propellers operating at low Reynolds numbers are subject to laminar-turbulent transition of the boundary layer, which impacts the distributions of pressure and shear stress on the blade surface. To design efficient propellers for operation at low Reynolds numbers, transitional effects must be included in the evaluations of propeller performance. In this work, transition modeling techniques in Reynolds Averaged Navier-Stokes computational fluid dynamics (RANS CFD) are utilized to evaluate and design propellers operating at low Reynolds numbers. The Galilean invariant γ transition model with an extension for crossflow transition is coupled to the SSG (Speziale, Sarkar, Gatski) /LRR (Launder, Reece, Rodi) -ω Reynolds stress transport turbulence model, with validation cases performed for flate plate boundary layers, 2-dimensional airfoils, a 3-dimensional wing, and 6:1 prolate spheroids. The performance of the coupled SSG/LRR-ω-γ Reynolds stress transition model for propellers with flow transition is then evaluated using experimental surface streamline and force data from four model-scale marine propellers. A method for the design of low Reynolds number marine propellers is presented using a transition-sensitive lifting line method coupled with the panel method code XFOIL. Initial geometries generated using the lifting-line method are then optimized in RANS CFD using the 2 equation γ-Reθ transition model and an adjoint method to warp the propeller shape to improve the efficiency. Two design studies are performed, including an open water propeller, and a propeller designed for a small autonomous underwater vehicle. / Doctor of Philosophy / Small-scale marine propellers exhibit transition from laminar to turbulent flow in the region near the surface of the blades. Regions of laminar and turbulent flow on the blade surface contribute differently to the overall thrust and torque on the propeller. Prediction of flow transition in the design process for small-scale marine propellers can improve the accuracy of the thrust and torque prediction compared to modeling the flow as purely laminar or turbulent. Propeller thrust and torque can be modeled using computational fluid dynamics (CFD) simulations, where transition modeling is accomplished by solving a transport equation for the intermittency γ, which represents the percentage of time the flow in a given location is turbulent. In this work, a transition model is coupled to a high-fidelity full Reynolds stress turbulence model, which solves 6 transport equations to solve for each component of the Reynolds stress tensor. The Reynolds stress tensor represents the turbulent velocity fluctuations in the governing equations solved in the CFD simulation. This coupled transition and turbulence model is then validated using experimental results of flows with a number of different transition mechanisms. The coupled model is then tested with a series of model-scale propellers, with results of the CFD simulations compared to the experimental results. A method for the design of propellers with flow transition is presented which incorporates transition effects. The designs generated by this method are then optimized in a CFD framework which morphs the blade geometry to improve the ratio of the thrust produced by the propeller to the torque, which corresponds to a higher efficiency. Two design cases are presented: a propeller designed for open water operation, and a propeller design for a small autonomous underwater vehicle.
|
2 |
TESTING AND VALIDATION OF A CORRELATION BASED TRANSITION MODEL USING LOCAL VARIABLESLikki, Srinivas Reddy 01 January 2004 (has links)
A systematic approach of testing and validating transition models is developed and employed in testing of a recently developed transition model. The testing methodology uses efficient computational tools and a wide range of test cases. The computational tools include a boundary layer code, single zone Navier Stokes solver, and a multi-block Navier Stokes solver which uses MPI and is capable of handling complex geometries and moving grids. Test cases include simple flat plate experiments, cascade experiments, and unsteady wake/blade interaction experiments. The test cases are used to test the predicting capabilities of the transition model under various effects such as free stream turbulence intensity, Reynolds number variations, pressure gradient, flow separation, and unsteady wake/blade interaction. Using the above test cases and computational tools a method is developed to validate transition models. The transition model is first implemented in boundary layer code and tested for simple flat plate cases. Then the transition model is implemented in single zone Navier Stokes solver and tested for hysteresis effects for flat plate cases. Finally the transition model is implemented in multi zone Navier Stokes solver and tested for compressor and turbine cascade cases followed by unsteady wake/blade interaction experiments. Using the method developed a new correlation based transition model (Menter et al. 2004) which uses local variables is tested and validated. The new model predicted good results for high free stream turbulence and high Reynolds number cases. For low free stream turbulence and low Reynolds number cases, the results were satisfactory.
|
3 |
Barriers to a biofuels transition in the U.S. liquid fuels sectorO'Donnell, Michael Joseph 05 August 2010 (has links)
Demand for liquid fuels (i.e., petroleum products) has burdened the U.S. with major challenges, including national security and economic concerns stemming from rising petroleum imports; impacts of global climate change from rising emissions of CO2; and continued public health concerns from criteria and hazardous (i.e., toxic) air pollutants. Over the last decade or so, biofuels have been touted as a supply-side solution to several of these problems. Biofuels can be produced from domestic biomass feedstocks (e.g., corn, soybeans), they have the potential to reduce GHG emissions when compared to petroleum products on a lifecycle basis, and some biofuels have been shown to reduce criteria air pollutants. Today, there are numerous policy incentives—existing and proposed—aimed at supporting the biofuels industry in the U.S. However, the Renewable Fuel Standard (RFS) Program stands as perhaps the most significant mandate imposed to date to promote the use of biofuels. Overall, the RFS stands as the key driver in a transition to biofuels in the near term. By mandating annual consumption of biofuels, increasing to 36 bgy by 2022, the program has the potential to significantly alter the state of the U.S. liquid fuels sector.
Fuel transitions in the transportation sector are the focus of this thesis. More specifically, the increasing consumption of biofuels in the transportation sector, as mandated by the RFS, is examined. With a well-developed, efficient, and expensive, petroleum-based infrastructure in place, many barriers must be overcome for biofuels to play a significant role in the transportation sector. Identifying and understanding the barriers to a biofuels transition is the objective of this thesis.
Although fuel transitions may seem daunting and unfamiliar, the U.S. transportation sector has undergone numerous transitions in the past. Chapter 2 reviews major fuel transitions that have occurred in the U.S. liquid fuels sector over the last half century, including the phasing out of lead additives in gasoline, the transition from MTBE to ethanol as the predominant oxygenate additive in gasoline, and the recent introduction of ULSD. These historical transitions represent the uncertainty and diversity of fuel transition pathways, and illustrate the range of impacts that can occur across the fuel supply chain infrastructure. Many pertinent lessons can be derived from these historical transitions and used to identify and assess barriers facing the adoption of alternative fuels (i.e., biofuels) and to understand how such a transition might unfold.
Computer models can also help to explore the implications of fuel transitions. In order to better understand the barriers associated with fuel transitions, and to identify options for overcoming these barriers, many recent research efforts have used sophisticated modeling techniques to analyze energy transitions. Chapter 3 reviews a number of these recent modeling efforts with a focus on understanding how these methodologies have been applied, or may be adapted, to analyzing a transition to biofuels. Four general categories of models are reviewed: system dynamics, complex adaptive systems, infrastructure optimization, and economic models.
In chapter 4, scenarios created from a high-level model of the liquid fuels sector (the Liquid Fuels Transition model) are presented to explore potential pathways and barriers to a biofuels transition. The scenarios illustrate different pathways to meeting the requirements of the RFS mandate, and differ based on the overall demand of liquid fuels, how the biofuels mandate is met (i.e., the mix of biofuels), and the status of the ethanol blend limit in the motor gasoline sector. The scenarios are used to evaluate the infrastructure implications associated with a biofuels transition, and illustrate the uncertainty that exists in assessing such a transition. / text
|
4 |
Reducing turbulence- and transition-driven uncertainty in aerothermodynamic heating predictions for blunt-bodied reentry vehiclesUlerich, Rhys David 24 October 2014 (has links)
Turbulent boundary layers approximating those found on the NASA Orion Multi-Purpose Crew Vehicle (MPCV) thermal protection system during atmospheric reentry from the International Space Station have been studied by direct numerical simulation, with the ultimate goal of reducing aerothermodynamic heating prediction uncertainty. Simulations were performed using a new, well-verified, openly available Fourier/B-spline pseudospectral code called Suzerain equipped with a ``slow growth'' spatiotemporal homogenization approximation recently developed by Topalian et al. A first study aimed to reduce turbulence-driven heating prediction uncertainty by providing high-quality data suitable for calibrating Reynolds-averaged Navier--Stokes turbulence models to address the atypical boundary layer characteristics found in such reentry problems. The two data sets generated were Ma[approximate symbol] 0.9 and 1.15 homogenized boundary layers possessing Re[subscript theta, approximate symbol] 382 and 531, respectively. Edge-to-wall temperature ratios, T[subscript e]/T[subscript w], were close to 4.15 and wall blowing velocities, v[subscript w, superscript plus symbol]= v[subscript w]/u[subscript tau], were about 8 x 10-3 . The favorable pressure gradients had Pohlhausen parameters between 25 and 42. Skin frictions coefficients around 6 x10-3 and Nusselt numbers under 22 were observed. Near-wall vorticity fluctuations show qualitatively different profiles than observed by Spalart (J. Fluid Mech. 187 (1988)) or Guarini et al. (J. Fluid Mech. 414 (2000)). Small or negative displacement effects are evident. Uncertainty estimates and Favre-averaged equation budgets are provided. A second study aimed to reduce transition-driven uncertainty by determining where on the thermal protection system surface the boundary layer could sustain turbulence. Local boundary layer conditions were extracted from a laminar flow solution over the MPCV which included the bow shock, aerothermochemistry, heat shield surface curvature, and ablation. That information, as a function of leeward distance from the stagnation point, was approximated by Re[subscript theta], Ma[subscript e], [mathematical equation], v[subscript w, superscript plus sign], and T[subscript e]/T[subscript w] along with perfect gas assumptions. Homogenized turbulent boundary layers were initialized at those local conditions and evolved until either stationarity, implying the conditions could sustain turbulence, or relaminarization, implying the conditions could not. Fully turbulent fields relaminarized subject to conditions 4.134 m and 3.199 m leeward of the stagnation point. However, different initial conditions produced long-lived fluctuations at leeward position 2.299 m. Locations more than 1.389 m leeward of the stagnation point are predicted to sustain turbulence in this scenario. / text
|
Page generated in 0.0864 seconds