The thesis is focused on the assessment of two wooden roof structures of the building, which is located in Brno on the street Rumiště 8. Parts of the work are also theoretical knowledge of roof structures, building technical survey and diagnostic methods. Rating roof truss was based on a survey of sensory and instrumental methods. In the first step were measured dimensions of roof truss members and were determined roof structures. In the next section was researched damage of elements and his causes. Rehabilitation solution was established for each type of damage to the components resist any attack as long as possible. This report had been prepared for the property owner who plans complete reconstruction.

Subject of this master thesis deals with project of viticulture building with guesthouse. Part of the guesthouse is also a restaurant and kitchen. The volume of wine production places this vinery into medium size category, affiliated guesthouse provides 20 places to accomodate guest and restaurant offers 50 places to seat. The building is situated in periphery of village Zaječí. The basement building has two storey. In cellar there is wine production equipment and technical background. First floor contains restaurant, kitchen and affiliated service, staff background and one accomodation unit designed for disabled people. Second floor offers 6 accomodation units and roomy terrace designated for guests. Part of every accomodation unit is separate bathroom. Perimeter bearing basement walls is made from lost formwork, perimeter walls of aboveground part is made from clay block. Cladding is insulated with contact system. Horizontal construction consist of reinforced concrete prestressed beams. Gabled roof is made from wooden truss girders covered by clay tiles.

Content of this master thesis is a design of a bulding of a home for the elderly in Únětice. The building is designed as a four storey, made of brick masonry with contact thermal insulation system and a hipped roof made of wooden girder trusses. There are 24 flats situated in this building.

This diploma thesis on a topic “Nursery school in Třebíč” deals with a new building proposal of a nursery school. The building is situated in Třebíč, in a densely populated part of the town which is called Podklášteří. It is a brick single-storey detached building, mounted on a gentle slope with green vegetation. The layout of the building is divided into three departments and an operational part. In each department, there is a dressing room, food distribution, study and dining room, playroom with a cushy job, toy store, warehouse of folding beds and bedding, washroom, toilet, utility room and room for the air handling units. Departments are covered by wooden trusses which bear single-layer saddle-shaped roof with an extensive green vegetation. Above the operational part, there is a single-layer flat roof. Wall system is made of ceramic blocs of a system Porotherm and trusses are from a company called Vazníky D.N.K.

The final thesis is focused on a design of an apartment house and processing of the design documentation. Designed building is situated on the periphery of the town Chrudim in the locality of the housing estate Na Větrníku. It’s a detached house with five floors and a basement. Building has a rectangular plan with dimensions 30,92 × 17,17 m. The foundation of the building is designed as a combination of piles and strips. The vertical constructions will be made of the clay blocks. The floor structures are designed as cast-in-place reinforced concrete floors. The apartment house has a saddle roof with a slope 15°. There are 25 apartments in the building and the mass garages for 15 cars, which are situated in the basement. The garages will serve to the residents of the house.

The aim of the final thesis was to design and check the steel loadbearing structure of the exhibition pavilon. The basis for the structural design was a specified building layout. The assessment of the structure was made according to valid czech and european standards, including the system of "Eurocodes". Construction is situated in Zlin. The rectangular plan of the building is 45,0 m wide and 48,0 m long. The peripheral field of the roof is flat, while the central field is designed as a barrel roof. Main truss was designed with 6,0 m centre to centre distance. Structural design of the main loadbearing elements was made by the Dlubal RFEM v.5.07 software. Selected structure elements, including joints and column anchors were verified manualy.

In my diploma thesis I designed 2 options for an arch roofing of place for dancing next to the restaurant in Dolní Jablonná. The first solution was designed as a timber structure with internal supporting arch from glue laminated timber. The second solution was designed as a two pin-supported steel beam. These variants were predesigned and as the final solution was chosen the timber structure. I designed a rafter, a glue laminated arch, a purlin, an anchorage and field joints. The thesis is including drawings of the layout design, details and anchorage plans.

The subject of the thesis is design and check of steel load-bearing structure of a footbridge. The footbridge spans the river Svitava in the town Blansko. The span length is 24 metres. The structural design is spatial bar structure with two main trusses. The upper and lower chords are curved in the shape of circular arch and they are connected by diagonal bars. In the level of the upper and lower chords the beams are connected by floor beam. Horizontal rigidity of the upper and lower construction area is secured by bracings. The bridge deck is laid on the lower floor beam. The solution is the result of the comparison and evaluation of two variants.

This Diploma thesis deal with a construction technological project of Multi-purpose sport center in Broumov. It contains compehesive section for the implementation of this structure as: Technical report, budget maintenance, the financial plan, the timetable, inspection and test plan, energy label of the bulding envelope.

This Diploma thesis deals with the solution of project documentation for the new Suzuki car showroom building. The proposed object is situated in region of Nitra in Topolcany district, located in suburb part of Topolcany town. The car showroom is designed as a building consisting from the car shop - showroom and the services for Suzuki automobiles. The car shop - showroom is designed as the operation for car sales and the administration part on the second floor. This part of the building is covered with warm flat roof. The second part of the object - Car service is a one-floor building covered with wood, truss purlin constructure in the shape of a saddle roof and in inclination of 9 degrees. The supporting construction of the building consist from cast-in-place reinforced concrete frame in the showroom part and from masonry system Ytong system in other parts of the building.