The diploma thesis deals with the issue of virtual commissioning of the workplace and the commissioning of communication channels needed for this purpose. The theoretical part describes the benefits of virtual commissioning, robot and PLC programming and effectors for robots. The practical part deals with the design of the final robot effector, virtual commissioning using the programs Process Simulate and TwinCAT 3, communication between programs and creation of programs for the workplace.

Zunehmende Vernetzung und gesteigerte Flexibilität in Planungs- und Produktionsprozessen sind die notwendigen Antworten auf die gesteigerten Anforderungen an die Industrie in Bezug auf Agilität und Einführung von Mehrwertdiensten. Dafür ist eine stärkere Digitalisierung aller Prozesse und Vernetzung mit den Informationshaushalten von Partnern notwendig. Heutige Informationssysteme sind jedoch nicht in der Lage, die Anforderungen eines solchen integrierten, verteilten Informationsraums zu erfüllen. Ein vielversprechender Kandidat ist jedoch Linked Data, das aus dem Bereich des Semantic Web stammt. Aus diesem Ansatz wurde Linked Enterprise Data entwickelt, welches die Werkzeuge und Prozesse so erweitert, dass ein für die Industrie nutzbarer und flexibler Informationsraum entsteht. Kernkonzept dabei ist, dass die Informationen aus den Spezialwerkzeugen auf eine semantische Ebene gehoben, direkt auf Datenebene verknüpft und für Abfragen sicher bereitgestellt werden. Dazu kommt die Erfüllung industrieller Anforderungen durch die Bereitstellung des Revisionierungswerkzeugs R43ples, der Integration mit OPC UA über OPCUA2LD, der Anknüpfung an industrielle Systeme (z.B. an COMOS), einer Möglichkeit zur Modelltransformation mit SPARQL sowie feingranularen Informationsabsicherung eines SPARQL-Endpunkts. / Increasing collaboration in production networks and increased flexibility in planning and production processes are responses to the increased demands on industry regarding agility and the introduction of value-added services. A solution is the digitalisation of all processes and a deeper connectivity to the information resources of partners. However, today’s information systems are not able to meet the requirements of such an integrated, distributed information space. A promising candidate is Linked Data, which comes from the Semantic Web area. Based on this approach, Linked Enterprise Data was developed, which expands the existing tools and processes. Thus, an information space can be created that is usable and flexible for the industry. The core idea is to raise information from legacy tools to a semantic level, link them directly on the data level even across organizational boundaries, and make them securely available for queries. This includes the fulfillment of industrial requirements by the provision of the revision tool R43ples, the integration with OPC UA via OPCUA2LD, the connection to industrial systems (for example to COMOS), a possibility for model transformation with SPARQL as well as fine granular information protection of a SPARQL endpoint.

This item contains the agenda, minutes, and attachments for the Faculty Senate meeting on this date. There may be additional materials from the meeting available at the Faculty Center.

Final thesis is focused on design of experimental workplace with industrial robots for manipulation operations, that will be used for educational and demonstrational purposes. Integration of sub-systems and workplace layout are worked out in this thesis. Key factor is so called virtual commissioning. Unique solution, which is contained within final thesis, combines several software tools for the design of robotic workplace. Static 3D model created in Autodesk Inventor Professional is imported into Tecnomatix Process Simulate, where dynamic 3D model is made – simulation model respectively. The control element is softPLC by Beckhoff company created in TwinCAT software. The connection of simulation model and control element is realized using standardized communication protocol OPC UA. This combination proved to be a cheap tool for virtual commissioning in practice, because only one personal computer is needed for the job.

The diploma thesis is focused on the building embedded demonstration application of the proprietary Low Complexity Ethernet module for industrial usage further called the LEN/LES 2. At the first, main used technologies such as MCU, or the lightweight IP stack is discussed, Consequently, there is detailed view on system hardware architecture proposed by hardware and software requirements. Then though part describes blocks of embedded system are in term of specific parts and hardware requirements to create universal board. Following chapters expresses first startup and known hardware bugs, LWIP implementation and MODBUS system implementation. The core of the system is the new released microcontroller an ADuCM4050 and the Low Complexity Ethernet MAC-PHY prototype block and much more dependent convenient peripherals of the MCU based application.

This diploma thesis describes design of interconnections and program modules for robotic cell control for parts creation. Research of this work is focused on industrial comunication protocols. The next part analyzes separate parts of the cell and their ways of connection. Futhermore, control structures of the cell are proposed and after comparison of them SCADA system structure was chosen. Project of connecting separate devices is done in Wonderware Systém Platform. The next step describes procedure of interconection of parts of the cell with each other. Then was designed visualization to operate robotic cell and to illustrate its state. Whole visualization was created using Wonderware InTouch program. In conclusion thesis is reviewed.

The Master’s thesis deals with virtual commissioning of the CNC machine tool changer. First deals with current state of knowledge with a systematic analysis of virtual commissioning. The 3D model is created by physical properties, sensors, actuators and control signals. In the last part of this thesis, a PLC program and visualization is created. The programs needed to create a virtual commissioning are jsou NX 12.0 - Mechatronic concept designer, SIMIT Simulation Platform V10.0 a TwinCAT 3.

This master‘s thesis is about the digital commissioning of a robotic production system for a machine tool tending. The initial research describes the current state of the art in the field of industrial robotics. Their types and possibilities are followed by the types and SW capabilities for digital commissioning. The system analysis of the robotic work cell. The practical part of this thesis describes the creation of the digital model and SW design. At the end of the thesis is performed virtual testing of the robotic system.

Zunehmende Vernetzung und gesteigerte Flexibilität in Planungs- und Produktionsprozessen sind die notwendigen Antworten auf die gesteigerten Anforderungen an die Industrie in Bezug auf Agilität und Einführung von Mehrwertdiensten. Dafür ist eine stärkere Digitalisierung aller Prozesse und Vernetzung mit den Informationshaushalten von Partnern notwendig. Heutige Informationssysteme sind jedoch nicht in der Lage, die Anforderungen eines solchen integrierten, verteilten Informationsraums zu erfüllen. Ein vielversprechender Kandidat ist jedoch Linked Data, das aus dem Bereich des Semantic Web stammt. Aus diesem Ansatz wurde Linked Enterprise Data entwickelt, welches die Werkzeuge und Prozesse so erweitert, dass ein für die Industrie nutzbarer und flexibler Informationsraum entsteht. Kernkonzept dabei ist, dass die Informationen aus den Spezialwerkzeugen auf eine semantische Ebene gehoben, direkt auf Datenebene verknüpft und für Abfragen sicher bereitgestellt werden. Dazu kommt die Erfüllung industrieller Anforderungen durch die Bereitstellung des Revisionierungswerkzeugs R43ples, der Integration mit OPC UA über OPCUA2LD, der Anknüpfung an industrielle Systeme (z.B. an COMOS), einer Möglichkeit zur Modelltransformation mit SPARQL sowie feingranularen Informationsabsicherung eines SPARQL-Endpunkts. / Increasing collaboration in production networks and increased flexibility in planning and production processes are responses to the increased demands on industry regarding agility and the introduction of value-added services. A solution is the digitalisation of all processes and a deeper connectivity to the information resources of partners. However, today’s information systems are not able to meet the requirements of such an integrated, distributed information space. A promising candidate is Linked Data, which comes from the Semantic Web area. Based on this approach, Linked Enterprise Data was developed, which expands the existing tools and processes. Thus, an information space can be created that is usable and flexible for the industry. The core idea is to raise information from legacy tools to a semantic level, link them directly on the data level even across organizational boundaries, and make them securely available for queries. This includes the fulfillment of industrial requirements by the provision of the revision tool R43ples, the integration with OPC UA via OPCUA2LD, the connection to industrial systems (for example to COMOS), a possibility for model transformation with SPARQL as well as fine granular information protection of a SPARQL endpoint.

This paper presents a comprehensive study on the implementation of real-time digital twins for industrial cobots, with a focus on the ABB GoFa CRB 15000 cobot. It highlights the relevance of digital twins in the context of Industry 4.0 and their ability to improve operational efficiency by representing physical processes in virtual models. The project's primary objective is to develop a real-time digital twin system to develop the bidirectional monitoring and control of industrial cobots, particularly in assembly tasks. This paper addresses the challenges encountered and the proposed solution, which include offline and online programming, the adoption of the OPC UA protocol for communication, and the use of ABB RobotStudio for simulation. A framework for understanding the implementation is provided, followed by a detailed analysis of the results obtained, as well as discussion and conclusions. An exploration of possible future work is also included, providing a comprehensive view of the project and its importance in the field of industrial robotics and digital twin technology.