This diploma thesis deals with the design of a metalworking shed with its adjacent administrative center. Both objects are statically independent. The buildings are located in the town of Bučovice. The dimensions of the shed are 54,78x72,58 m. There is an overhead crane situated in the middle wing. The shed‘s height is +11,62 m. The administrative building has L-shaped plan. Its dimensions are 27,62x8,13 m (the wider part is 15,63 m). The design of the administrative object has two variants. Both variants have composite steel-concrete ceiling structure. The heights of the objects are +11,20 m (A variant) and +18,20 m (B variant). For the A variant, drawings were also drawn up with the design and assessment of structural details and anchoring.

This thesis deals with design of steel structure multi-storey garage. It is the five-storey steel structure of rectangular plan. The construction is designed for the city of Olomouc. Static calculation is solved by a combination of manual calculation and calculation using software Scia engineer 18. There are the following main load bearing structural elements designed and examined in the structural analysis: truss, purlin, bracing, column, composite beam, joints, foot and anchoring. Thesis includes drawing documentation

The aim of the diploma thesis was to design reinforced concrete construction of the indoor swimming pool and ensure impermeability of the construction, to ensure behavior as concrete tank construction. Static analysis was done by using program Dlubal RFEM 5.12, where interaction of subsoil with construction was taken into account. Slabs around the swimming pool area were divided into expansion section because of temperature changes from glass façade an after that the sealing of expansion gap was solved. Construction system under the swimming was designed and was tested the behavior of walls and slabs. Analysis was done also to considerate of hydration heat. The drawing was done by software CADKON RCD.

The diploma‘s thesis deals with the design and assessment of prestressed cocrete tank of biogas station at ultimate limit state and also at serviceability limit state, according to ČSN EN 1992-1-1: Design of concrete structures. Specifically, the design of wall of the tank and foundation slab. The text part contains general information on the desing of the structure, static idealization of the structure, type of load and method for calculation of inner forces. Attachments contain drawing documentation and structural analysis, which completes the text part and solves in detail said structure.

The master’s thesis deals with a design of a reinforced concrete foundation of multi-storey office building. The basement of the building is an underground watertight structure. The design of foundations is a combination of a concrete slab and piles. Internal forces were analysed in RFEM software based on finite element method. The structural assessment of underground construction was performed according to ultimate and serviceability limit states. Due to watertight function of construction, the reinforcement was also designed according to non-force effect in early stage.

The topic of this thesis is detailed design of the supporting structure of a bridge. Three variants are designed. The structure is designed as a single beam bridge of 6 spans. The calculation of load efects make in software MidasCivil 2019 and Scia Engineer 18.1. The subject of the expertise of the structure is service limit state and ultimate limit state. For evaluation of cross sections is used MS Excel. Both design and relevant drawing documentation of the bridge deck and substructure. The design and assessment are according to the europien standards.

The Diploma thesis deals with the reconstruction design of a footbridge in the city of Kroměříž, Czech Republic. The footbridge would serve as safe transport for pedestrians over the Morava river. The main objective of the thesis is to conceive two or three reconstruction designs. The most suitable one will be opted for and elaborated in more detail. Eventually, strengthening of the bridge by means of additional prestressing using mono-strand post-tensioning systems is picked as the best solution of the planned reconstruction. The monostrand post-tensioning system is led under the deck, the cross section being outside. External cables are anchored in concrete blocks built around existing supports. Load-generated internal forces are calculated on a spatial bar model with non-linear first-order analysis. The calculation is executed using the finite element method in the midas Civil programme. The chosen reconstruction design is then assessed against load capacity limit states, and functionality. Also, the designed reconstruction is assed for dynamic effects. Results are compared with existing structure, and verified against the real-time tensometric measurement-obtained data. Dimensions, assessment of load-bearing structure, and structural details are all made according to valid Eurocodes.

The aim of this diploma thesis is to design a load-bearing structure of the botanical pavillion in Jihlava. The construction is designed as a variable structure of both steel and timber. Each solution has a different type of ribs. The layout is a hexadecagon with maximum dimension of 30 meters. The height of the building is considered to be 10 meters.

This diploma thesis is focused on the roofing of the stage in spa park in Poděbrady. This construction is designed in two variants. In each variant is determined load on the structure and internal forces acting on the structure. Of these two variants, only one variant was selected. This selected variant was design in detail. In this variant was dimension their parts. Under the roof construction is located stage, which was not solved in the diploma thesis. All elements are dimensioned to the ultimate load condition by ČSN EN 1992-1-1. Drawings of the foundations, shapes construction, reinforcement and visualization are processed in the drawing part.

Diploma thesis is focused on structural assessment and strengthening of the reinforced concrete flor slab disturbed by excessive deflection. Thesis included assesment of the existing construction and design method of strengthening of the floor structure with system using prestressing strands without bond.