Οι τεχνικές ασύρματης μετάδοσης Ultra Wide Band (UWB) είναι γνωστές εδώ και αρκετές δεκαετίες. Το ϐασικό χαρακτηριστικό των συγκεκριμένων συστη- μάτων είναι η εκπομπή και λήψη σήματος που εκτείνεται σε πολύ μεγάλο εύρος συχνοτήτων. Τα τελευταία χρόνια παρατηρείται διαρκώς αυξανόμενο ερευνητικό ενδιαφέρον γύρω από την περιοχή των τηλεπικοινωνιακών συ- στημάτων που χρησιμοποιούν UWB τεχνικές μετάδοσης, κυρίως λόγω της μεγάλης εφαρμοσιμότητάς της. Στις τηλεπικοινωνιακές εφαρμογές, η χρήση της τεχνικής UWB μπορεί να οδηγήσει σε αύξηση των ταχυτήτων ασύρματης μετάδοσης, λόγω της δυνατότητας εκπομπής μεγάλου αριθμού παλμών σε πολύ μικρό χρονικό διάστημα. Σε εφαρμογές εντοπισμού, το UWB μπορεί να ωθήσει προς την αύξηση της διακριτικής τους ικανότητας. Επίσης, κατάλ- ληλα UWB σήματα μπορούν να χρησιμοποιηθούν όπου υπάρχει ανάγκη για υψηλή διεισδυτικότητα μέσα από εμπόδια. Ο πιο απλός τρόπος μετάδοσης σήματος τέτοιου είδους είναι η εκπομ- πή εξαιρετικά σύντομων παλμών. Ο τρόπος με τον οποίο τα μεταδιδόμενα σύμβολα διαμορφώνουν αυτούς τους παλμούς ποικίλλει. Οι πρώτες UWB εφαρμογές χρησιμοποιούσαν σχεδόν αποκλειστικά την τεχνική Dιαμόρφωσης Θέσης Παλμού (Pulse Position Modulation PPM) γιατί η αντιστροφή πολύ σύντομων παλμών ήταν δύσκολο να υλοποιηθεί. Με αυτή την τεχνική, το κάθε μεταδιδόμενο σύμβολο καθορίζει τη ϑέση του παλμού στο πεδίο του χρόνου. Αργότερα, άρχισαν να χρησιμοποιούνται και τεχνικές Dιαμόρφωσης Πλάτους Παλμού (Pulse Amplitude Modulation PAM). Wστόσο, ένα μεγάλο πλεονέκτημα της μεθόδου PPM είναι οι μειωμένες απαιτήσεις της σε ισχύ, γιατί μεταδίδονται πολύ σύντομοι παλμοί ακολουθούμενοι από σχετικά με- γάλες περιόδους «σιωπής». Η ιδιότητα αυτή, καθιστά τη μέθοδο διαμόρφωσης PPM ιδιαίτερα ελκυστική σε εφαρμογές που απαιτούν χαμηλή κατανάλωση ισχύος. Σε αυτή την εργασία μελετούμε τη δομή ενός συστήματος μετάδοσης δε- δομένων Ultra Wide Band το οποίο χρησιμοποιεί τη μέθοδο διαμόρφωσης PPM. Η συμπεριφορά ενός τέτοιου συστήματος κατά τη μετάδοση μέσα από διάφορα κανάλια παρουσία ϑορύβου εξετάζεται μέσω εξομοίωσης. Είναι γνω- στό ότι τα συστήματα αυτά πλήττονται τόσο από το ϑόρυβο που εισάγεται λό- γω της μετάδοσης, διασυμβολική παρεμβολή, αλλά και παρεμβολή ανάμεσα στους πολλαπλούς χρήστες. Επίσης, οι περιορισμοί που ορίστηκαν στις ΗΠΑ για την μεταδιδόμενη ισχύ ανά συχνότητα των εμπορικών UWB εφαρμογών, οι οποίοι αναμένεται να υιοθετηθούν και στον υπόλοιπο κόσμο, αποτελούν ένα επιπλέον ϑέμα που επηρεάζει την επίτευξη υψηλών ϱυθμών μετάδοσης δεδομένων. Μια λύση είναι η χρήση τεχνικών ισοστάθμισης ή, ισοδύναμα, μεθόδων εκτίμησης του καναλιού που λειτουργούν στο δέκτη. Αν και οι κλασικές τεχνικές ισοστάθμισης ή εκτίμησης καναλιού μπορούν να εφαρμο- στούν με μικρές τροποποιήσεις και σε UWB σήματα διαμορφωμένα με PPM, ένα ϐασικό εμπόδιο είναι τόσο το μεγάλο πλήθος παραμέτρων που πρέπει να εκτιμηθούν (ένα τυπικό κανάλι σε εσωτερικό χώρο μπορεί να έχει ακόμη και πάνω από 150 συντελεστές), όσο και ο πολύ μεγάλος ϱυθμός δειγματοληψίας που απαιτείται. Επίσης, ϕαίνεται ότι μπορούν να αξιοποιηθούν τα ιδιαίτερα χαρακτηριστικά που εμφανίζει η εφαρμογή της διαμόρφωσης PPM σε UWB συστήματα, όπως είναι το ϕαινόμενο πολλαπλών μονοπατιών (multipath) σε συνδυασμό με την υψηλή διακριτικότητα (resolution) του σήματος UWB, ή ακόμη και η δυνατότητα μετάδοσης του ίδιου συμβόλου περισσότερες από μί- α ϕορές. Στα πλαίσια της εργασίας ϑα μελετηθούν και ϑα ενσωματωθούν στο σύστημα υπάρχουσες μέθοδοι εκτίμησης ή ισοστάθμισης καναλιού, οι οποί- ες αποτελούν προϊόν πρόσφατων προσπαθειών προς αυτή την κατεύθυνση. Θα μελετηθεί ο τρόπος με τον οποίο επιδρούν στην απόδοση του συστήμα- τος. Τέλος, ϑα εξεταστεί η δυνατότητα επέκτασης των μεθόδων εκτίμησης καναλιού με σκοπό τη ϐελτίωση της υπολογιστικής τους πολυπλοκότητας, μετατρέποντάς τους σε επαναληπτικούς/προσαρμοστικούς αλγορίθμους. / -

Ultra-wide band (UWB) 6-9 GHz antenna, band pass filter and low-noise amplifier (LNA) optimization using co-simulation of the RF front-end. At higher frequencies, carefully conducted design methodologies are required for RF front-end parameter optimization, such as power gain and low noise figure with low power consumption.

<p>The first flexible chip-less RFID temperature sensor system for food monitoring to have a  resolution of 0.2  <strong>°</strong>C for temperature measurements between 79  <strong>°</strong>C and -22.8  <strong>°</strong>C is introduced. This  system has a significant improvement in temperature range compared to current flexible RFID  sensors and can provide high accuracy measurements for real time food monitoring at the system  level. Flexible sensors provide low-cost, better flexibility, and longer service life; hence, flexible  sensor systems can provide a new future for food monitoring in commercial applications. The  proposed system presents a new feature and enables a food monitoring system that utilizes a  flexible sensor system. The system introduced in this paper enables a wireless measurement system  providing 100 dB dynamic range with 160 Msps and 16-bit resolution for precise temperature  measurements that are critical for food quality within 100  <strong>°</strong>C temperature range. The full sensing  system is designed, tested and measurements results are confirmed to be within expected accuracy </p>

No / This study presents a miniaturised multiple input and multiple output /diversity antenna which is suitable for high data-rate communication systems such as mobile ultra-wideband (UWB). This antenna assembly comprises two identical planar inverted-F antennas, a T-shaped structure connecting them and a finite ground plane. The T-shaped structure improves the impedance matching and suppresses the mutual coupling between the antenna elements over a wider bandwidth than previously reported. The compact envelope dimension of this antenna is 50 x 90 x 7.5 mm(3). Theoretical and experimental S-parameters are illustrated for this antenna that fully cover the UWB operating frequency band of 3.1-10.6 GHz, with a reflection coefficient and mutual coupling better than -10 and -20 dB, respectively. Acceptable agreement is obtained between computed and measured radiation patterns, gains, envelope correlation coefficient and channel capacity loss. The proposed antenna is an attractive candidate to provide pattern diversity and enhance channel capacity in a rich scattering environment.

Ce manuscrit présente la conception d'un sondeur de canal de propagation en intérieur de bâtiment en contexte Ultra Large Bande ULB. Le sondeur est basé sur une architecture parallèle en réception composée de circuits cinq ports et d'un réseau d'antennes imprimées LTSA (Linear Tapered Slot Antenna). Le sondeur a été réalisé et testé dans la bande de fréquence ULB (6 to 8.5 GHz) alloué par l'ETSI . Les mesures réalisées ont permis d'étudier les directions d'arrivée (DOA) ainsi que le temps d'arrivée des ondes correspondantes aux multi trajets à l'intérieur d'un bâtiment. L'association de la technique cinq-port et de la méthode d'estimation MUSIC (Multiple Signal Classification) permet d'avoir un sondeur à faible coût de réalisation et à haute précision d'estimation. Plusieurs scénarios de propagation sont traités dans le manuscrit que se soit en condition de visibilité (LOS) ou de non visibilité (NLOS)

In recent years, many researchers have investigated automated progress tracking for construction projects. These efforts range from 2D photo-feature extraction to 3D laser scanners and radio frequency identification (RFID) tags. A multi-sensor data fusion model that utilizes multiple sources of information would provide a better alternative than a single-source model for tracking project progress. However, many existing fusion models are based on data fusion at the sensor and object levels and are therefore incapable of capturing critical information regarding a number of activities and processes on a construction site, particularly those related to non-structural trades such as welding, inspection, and installation activities. In this research, a workflow based data fusion framework is developed for construction progress, quality and productivity assessment. The developed model is based on tracking construction activities as well as objects, in contrast to the existing sensor-based models that are focussed on tracking objects. Data sources include high frequency automated technologies including 3D imaging and ultra-wide band (UWB) positioning. Foreman reports, schedule information, and other data sources are included as well. Data fusion and management process workflow implementation via a distributed computing network and archiving using a cloud-based architecture are both illustrated. Validation was achieved using a detailed laboratory experimental program as well as an extensive field implementation project. The field implementation was conducted using five months of data acquired on the University of Waterloo Engineering VI construction project, yielding promising results. The data fusion processes of this research provide more accurate and more reliable progress and earned value estimates for construction project activities, while the developed data management processes enable the secure sharing and management of construction research data with the construction industry stakeholders as well as with researchers from other institutions.

In recent years, many researchers have investigated automated progress tracking for construction projects. These efforts range from 2D photo-feature extraction to 3D laser scanners and radio frequency identification (RFID) tags. A multi-sensor data fusion model that utilizes multiple sources of information would provide a better alternative than a single-source model for tracking project progress. However, many existing fusion models are based on data fusion at the sensor and object levels and are therefore incapable of capturing critical information regarding a number of activities and processes on a construction site, particularly those related to non-structural trades such as welding, inspection, and installation activities. In this research, a workflow based data fusion framework is developed for construction progress, quality and productivity assessment. The developed model is based on tracking construction activities as well as objects, in contrast to the existing sensor-based models that are focussed on tracking objects. Data sources include high frequency automated technologies including 3D imaging and ultra-wide band (UWB) positioning. Foreman reports, schedule information, and other data sources are included as well. Data fusion and management process workflow implementation via a distributed computing network and archiving using a cloud-based architecture are both illustrated. Validation was achieved using a detailed laboratory experimental program as well as an extensive field implementation project. The field implementation was conducted using five months of data acquired on the University of Waterloo Engineering VI construction project, yielding promising results. The data fusion processes of this research provide more accurate and more reliable progress and earned value estimates for construction project activities, while the developed data management processes enable the secure sharing and management of construction research data with the construction industry stakeholders as well as with researchers from other institutions.

Yes / In this paper, balanced dual segment cylindrical dielectric antennas (CDRA) with ultra wide-band operation are reported. First a T-shaped slot and L-shaped microstrip feeding line are suggested to furnish a balanced coupling mechanism for feeding two DRAs. Performance of the proposed antenna was analyzed and optimized against the target frequency band. The proposed antenna was then modified by adding a C-shaped strip to increase the gain. The performances of both balanced antennas were characterized and optimized in terms of antenna reflection coefficient, radiation pattern, and gain. The antennas cover the frequency range from 6.4 GHz to 11.736 GHz, which is 58.7% bandwidth. A maximum gain of 2.66 dB was achieved at a frequency of 7 GHz with the first antenna, with a further 2.25 dB increase in maximum gain attained by adding the C-shaped strip. For validation, prototypes of the two antennas were fabricated and tested. The predicted and measured results showed reasonable agreement and the results confirmed good impedance bandwidth characteristics for ultra-wideband operation from both proposed balanced antennas.

Thesis (MScEng)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: This thesis is about the design, simulation and measuring of ultra wide band antennas for use in the Square Kilometre Array (SKA). The SKA is a radio astronomy project with one of the aims of detecting hydrogen particles in deep space. Several thousand antennas over a wide band of frequencies are needed to receive the radiation from these particles. This motivates the need for a low-cost ultra wide band antenna with the focus on the low frequency part of the SKA. In this thesis we present two design strategies: The first design strategy is for a printed LPDA on a substrate and design curves are generated. A scale model was built and measurements did not correlate with simulation results. This is due to manufacturing tolerances and assembly of the pyramidal structure. The second design strategy is for a full scale zig-zag antenna and design curves were also generated. The aim here is to produce a low-cost prototype by using brazing rods for the wire structure and mount it on a wooden frame. A full scale model was built and measurements on the roof produced much interference for the radiation pattern, but the reflection coefficient was good. We suggest doing measurements in an interference free environment in order to achieve the needed results. To conclude we suggest using the zig-zag antenna for the SKA. Some issues do however need more attention as the transformer has some losses, the cross polarisation is probably not good enough and the beamwidth does not reach the specification. We demonstrated a low cost prototype and there is the possibility of low-cost large scale manufacturing but this needs to be addressed. This has however not been analysed as many factors for large scale manufacturing are very difficult to predict beforehand and lies outside the scope of this thesis. / AFRIKAANSE OPSOMMING: Hierdie tesis gaan oor die ontwerp, simulasie en opmeting van ultrawyebandantennas vir gebruik in die SKA ("Square Kilometre Array"). Die SKA is ’n radioastronomie projek met die doel om waterstof partikels op te spoor in die ruimte. Duisende antennas wat oor ’n wye band van frekwensies strek is nodig om die energie van die partikels op te vang. Hieruit is daar ’n aanvraag vir lae-koste ultrawyebandantennas met die fokus op die lae frekwensie deel van die SKA. In hierdie tesis word twee ontwerpstrategieë voorgestel: Die eerste ontwerpstrategie is vir ’n gedrukte logaritmies periodiese dipool reeks (LPDR) op ’n substraat tesame met ontwerpskurwes wat gegenereer word. ’n Skaal model is gebou en die gemete resultate stem nie ooreen met die simulasie nie. Dit kan toegeskryf word aan vervaardigingstoleransies en die aanmekaar sit van die piramide struktuur. Die tweede ontwerpstrategie is vir ’n vol skaal sigsag ("zig-zag") antenna met ontwerpskurwes wat ook gegenereer word. Die doel is om ’n lae-koste prototipe te bou deur sweissoldeerdraad te gebruik vir die draadstruktuur en dan op ’n hout raam te plaas. ’n Vol skaal model is gebou en metings op die dak het baie interferensie veroorsaak vir die stralingsveld, maar tog was die weerkaatskoëffisient goed. Ons stel voor om die metings te herhaal in ’n steuringvrye omgewing om sodoende die korrekte resultate te verkry. Om af te sluit stel ons voor om die sigsag antenna vir die SKA te gebruik. Sekere kwessies soos die transformator wat verlieserig is, die kruispolarisasie wat moontlik nie goed genoeg is nie en die bundelwydte wat nie die spesifikasie haal nie moet nog aandag geniet. Ons het ’n lae-koste prototipe gedemonstreer en daar is die moontlikheid om dit op grootskaalse vervaardiging ook goedkoop te doen, maar dit moet nog uigesorteer word. Dit was wel nie geanaliseer nie, siende dat vele faktore ’n rol speel by grootskaalse vervaardiging wat uiters moeilik is om voor die tyd te voorspel en buite die omvang van die tesis lê.

Made available in DSpace on 2014-12-17T14:55:43Z (GMT). No. of bitstreams: 1 BrunaALS_DISSERT.pdf: 4847936 bytes, checksum: ecc365df0d6ba32afff7d15a2ae1d14a (MD5) Previous issue date: 2010-06-14 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / The microstrip antennas are largely used in wireless communication systems due to their low cost, weight, less complex construction and manufacturing, in addition to its versatility. UWB systems have emerged as an alternative to wireless communications over short distances because they offer of higher capacity and lower multipath distortion than other systems with the same purpose. Combining the advantages of microstrip antennas to the characteristics of UWB, it is possible to develop more and more smaller devices, with diverse geometries to operate satisfactorily in these systems. This paper aims to propose alternatives to microstrip antennas for UWB systems operate in the range between 3.1 and 10.6 GHz, with a patch on circular ring. Some techniques are analyzed and employed to increase the bandwidth of proposed antenna: the insertion of a parasitic elements and a rectangular slit in the displaced ground plane. For this, key issues are presented as the basic principles of UWB systems, the fundamental theory of antennas and microstrip antennas. The simulations and experimental characterization of constructed antennas are presented, as well as analysis of parameters such as bandwidth and radiation pattern / As antenas de microfita s?o amplamente utilizadas nos sistemas de comunica??o sem fio devido ?s suas caracter?sticas de baixo custo, peso, menor complexidade de constru??o e fabrica??o, al?m de sua versatilidade. Os sistemas UWB surgiram como uma alternativa ?s comunica??es sem fio de curtas dist?ncias por oferecerem maior capacidade e menor distor??o por multipercurso que outros sistemas com a mesma finalidade. Aliando as vantagens das antenas de microfita ?s caracter?sticas do UWB ? poss?vel desenvolver dispositivos cada vez menores e com geometrias diversificadas para operar satisfatoriamente nesses sistemas. Este trabalho tem como objetivo propor alternativas de antenas de microfita para operar em sistemas UWB, na faixa entre 3,1 e 10,6 GHz, com patch em anel circular. S?o empregadas e analisadas algumas t?cnicas para aumentar a largura de banda das antenas propostas: a inser??o de elementos parasitas e de uma fenda retangular no plano terra deslocado. Para isto, s?o apresentados temas fundamentais como os princ?pios b?sicos dos sistemas UWB, a teoria fundamental de antenas e antenas de microfita. S?o apresentadas as simula??es e caracteriza??es experimentais das antenas constru?das, bem como uma an?lise de par?metros como a largura de banda e o diagrama de radia??o