Thesis (M. Tech. (Information Technology)) -- Central University of technology, Free State, 2013 / This study compared the usability of three Information and Communication Technology (ICT) network programs in a learning environment. The researcher wanted to establish which program was most adequate from a usability perspective among second-year Information Technology (IT) students at the Central University of Technology (CUT), Free State. The Software Usability Measurement Inventory (SUMI) testing technique can measure software quality from a user perspective. The technique is supported by an extensive reference database to measure a software product’s quality in use and is embedded in an effective analysis and reporting tool called SUMI scorer (SUMISCO). SUMI was applied in a controlled laboratory environment where second-year IT students of the CUT, utilized SUMI as part of their networking subject, System Software 1 (SPG1), to evaluate each of the three ICT network programs. The results, strengths and weaknesses, as well as usability improvements, as identified by SUMISCO, are discussed to determine the best ICT network program from a usability perspective according to SPG1 students.

Thesis (M. Tech. (Information Technology)) -- Central University of technology, Free State, 2013 / The aim of this study was to create a dynamic software system that captures all information related to a student and delivers it to the educators, principal, higher authorities and parents. In order to achieve this aim, an investigation was launched as to the development of a cost-effective school management system for disadvantaged schools in the Free State Province using the Software as a Service (SaaS) delivery model. Although a variety of other school management systems exist in the market, they are often expensive and difficult to maintain. Details such as previous academic performances, disciplinary actions taken against a student in the current school, ailments the student suffers from and parental details are some of the information that will help an educator to better understand a student. The software that is currently in use fails to deliver this information. Designing the software as a multitenant system, helps accommodate different schools under the same database, while the shared database, shared schema reduces back-end costs. Database design was carried out in such a way that tenant data is logically isolated and that data integrity is maintained throughout. What makes the software explained in this study cost effective is the method of delivery that was employed, which is SaaS. Here, software is not purchased, there is no upfront capital and the yearly license fee is eliminated, as schools need only pay a monthly rental fee for the services they use. Since all services are provided through the Internet, there is no need for system space; the only requirement is a high-speed Internet network.

Thesis (M. Tech. (Engineering: Electrical)) -- Central University of technology, Free State, [2014] / The project is aimed at exploring the application of Machine Vision in a Reconfigurable Manufacturing System (RMS) Environment. The Machine Vision System interfaces with the RMS to verify the reconfiguration and positioning of devices within the assembly system, and inspects the product for defects that infringe on the quality of that product. The vision system interfaces to the Multi-agent System (MAS), which is in charge of scheduling and allocating resources of the RMS, in order to communicate and exchange data regarding the quality of the product. The vision system is comprised of a Compact Vision System (CVS) device with fire-wire cameras to aid in the image acquisition, inspection and verification process. Various hardware and software manufacturers offer a platform to implement this with a multiple array of vision equipment and software packages. The most appropriate devices and software platform were identified for the implementation of the project. An investigation into illumination was also undertaken in order to determine whether external lighting sources would be required at the point of inspection. Integration into the assembly system involved the establishment communication between the vision system and assembly system controller.

Thesis (M. Tech. (Information Technology)) -- Central University of technology, Free State, 2013 / Markets for manufactured products are characterized by a fragmentation of the market (with regards to size and time), and by shorter product cycles. This is due to the occurrence of mass customization and globalization. In mass customization, the same basic products are manufactured for a broad market, but then consumers are given the liberty to choose the “finishing touches” that go with the product. The areas that manufacturers now compete for are higher quality products, low cost and timely response to market changes. Appropriate business strategies and manufacturing technologies must thus be used to implement these strategic dimensions. The paradigm of Reconfigurable Manufacturing System (RMS) has been introduced to respond to this new market oriented manufacturing environment. The design of RMS allows ease of reconfiguration as it has a modular structure in terms of software and hardware. This allows ease of reconfiguration as a strategy to adapt to changing market demands. Modularity will allow the ability to integrate/remove software/hardware modules without affecting the rest of the system. RMS can therefore be quickly reconfigured according to the production requirements of new models, it can be quickly adjusted to exact capacity requirements as the market grows and products change, and it is able to integrate new technology. In this research project, real-time, open controller is designed and developed for Reconfigurable Manufacturing Tools (RMTs). RMTs are the basic building blocks for RMS. Real time and openness of the controllers for RMT would allow firstly, for the modular design of RMTs (so that RMTs can be adapted easily for changing product demands) and secondly, prompt control of RMT for diagnosability.

Thesis (M. Tech. (Engineering: Electrical)) -- Central University of technology, Free State, 2013 / In the industry, automation is used to optimize production, improve product quality and increase profitability. By properly implementing automation systems, the risk of injury to workers can be minimized. Robots are used in many low-level tasks to perform repetitive, undesirable or dangerous work. Robots can perform a task with higher precision and accuracy to lower errors and waste of material. Machine Vision makes use of cameras, lighting and software to do visual inspections that a human would normally do. Machine Vision is useful in application where repeatability, high speed and accuracy are important. This study concentrates on the development of a dedicated robot vision system to automatically place components exiting from a conveyor system onto Automatic Guided Vehicles (AGV). A personal computer (PC) controls the automated system. Software modules were developed to do image processing for the Machine Vision system as well as software to control a Cartesian robot. These modules were integrated to work in a real-time system. The vision system is used to determine the parts‟ position and orientation. The orientation data are used to rotate a gripper and the position data are used by the Cartesian robot to position the gripper over the part. Hardware for the control of the gripper, pneumatics and safety systems were developed. The automated system‟s hardware was integrated by the use of the different communication protocols, namely DeviceNet (Cartesian robot), RS-232 (gripper) and Firewire (camera).

Thesis (M. Tech. (Engineering: Mechanical)) -- Central University of Technology, Free State, 2013 / This research examines the suitability of Additive Manufacturing (AM) for manufacturing dies used in aluminium high pressure die casting. The study was guided by the following objectives: • The reviews of applicable literature sources that outline technical and application aspects of AM in plastic injection moulds and the possibilities of applying it to high pressure casting die. • To introduce AM grown die components in die manufacture. Further, to develop a methodology that will allow industry to apply AM technology to die manufacture. • Revolutionise the way die manufacture is done. The potential for AM technologies is to deliver faster die manufacture turnaround time by requiring a drastically reduced amount of high level machining accuracy. It also reduces the number of complex mechanical material removal operations. Fewer critical steps required by suitable AM technology platforms able to grow fully dense metal components on die casting tools able to produce production runs. • Furthermore, promising competitive advantages are anticipated on savings to be attained on the casting processing side. AM technology allows incorporation of features in a die cavity not possible to machine with current machining approaches and technology. One such example is conformal cooling or heating of die cavities. This approach was successfully used in plastic injection mould cavities resulting in savings on both the part quality as well as the reduction on cycle time required to produce it (LaserCUSING®, 2007). AM technology has evolved to a point where as a medium for fast creation of an object, it has surpassed traditional manufacturing processes allowing for rapidly bridging the gap between ideas to part in hand. The suitability of the AM approach in accelerating the die manufacturing process sometime in the near future cannot be dismissed or ignored. The research showed that there is promise for application of the technology in the not too distant future. In the South African context, the current number and affordability of suitable AM platforms is one of the main stumbling blocks in effecting more widespread applied research aimed at introduction of the technology to die manufacture.

Thesis (M. Tech. (Engineering Electrical)) -- Central University of Technology, Free State, [2014] / This dissertation evaluates the software and hardware components used to develop a Reconfigurable Assembly System with an Integrated Information Management System. The assembly system consists of a modular Cartesian robot and vision system. The research focuses on the reconfigurability, modularity, scalability and flexibility that can be achieved in terms of the software and hardware components used within the system. The assembly system can be divided into high-level control and low-level control components. All information related to the product, Cartesian positioning and processes to follow resides in the Information Management System. The Information Management System is the high-level component and consists of a database, web services and low-levelcontrol drivers. The high-level system responds to the data received from the low-level systems and determines the next process to take place. The low-level systems consist of the PLC (Programmable Logic Controller) and the vision system. The PLC controls the Cartesian robot’s motor controllers and handles all events raised by field devices (e g. sensors or push buttons). The vision system contains a number of pre-loaded inspections used to identify barcodes and parts, obtain positioning data and verify the products’ build quality. The Cartesian robot’s positioning data and the vision system’s inspections are controlled by the Information Management System. The results showed that the high-level control software components are able to add more modularity and reconfigurability to the system, as it can easily adapt to changes in the product. The high-level control components also have the ability to be reconfigured while the assembly system is online without affecting the assembly system. The low-level control system is better suited to handling the control of motor controllers, field devices and vision inspections over an industrial network.

Thesis (M. Tech.) - Central University of Technology, Free State, 2010 / The main aim of this research was to automate student attendance registration, thereby reducing human involvement in the whole process. This was made possible using Radio Frequency Identification (RFID) technology. The Central University of Technology uses student cards that are compatible for use with RFID technology. As a result, no initial investment (except for the existing personal computer’s and the constructed RFID reader) in infrastructure was required for this project. The basic working of the project was as follows. The students belonging to a specific class had their vital educational data (Student number, Name) entered into a database table at the time of registration. A student card containing a serial number, with reference to the data contained in the database table, was given to the students after registration. The students walk into their respective classes and scan their student cards with the RFID reader. The serial number stored in the student card is transferred to the reader and from there wirelessly to the main server using ZigBee technology. In the main server, using Java programming language, the card serial number is sent to the Integrated Development Environment (IDE). In this project the Netbeans IDE (Java platform) was used. The Netbeans IDE is connected to the Apache Derby database using Java Database Connector (JDBC), so the serial number (which is referenced to the educational data of the students) from the student card is automatically compared with the original database created at the time of registration. Once a match is confirmed between the two entries, the data is entered into a separate database table which serves as the basic attendance sheet for a specific day.

Thesis (D. Tech. (Business Administration )) - Central University of Technology, Free State / The purpose of this study was to determine the extent to which certain selected factors serve as drivers of innovation in small accommodation businesses (SABs) in two developing economies in Southern Africa namely South Africa and Zimbabwe with the ultimate aim of assisting policy makers and support agencies in formulating innovation oriented strategies for the sector. Two samples were randomly selected from SABs in Zimbabwe and South Africa- two neighbouring Southern African countries. Parametric tests which include t-tests and one-way ANOVAs as well as Bonferonni tests as post-hoc measures were used to test whether SAB propensity to engage in different dimensions of innovation differs by gender; firm size, owner-managers’ years of experience and level of education respectively. Pearson Product Moment Correlations were employed to assess the relationships between market orientation, learning orientation and innovation while Chi-square tests were performed to establish the inter-relationships between independent demographic variables, namely age, gender, education and work experience. In order to investigate whether there are any significant interaction effects between the age of the respondents and their experience in the accommodation sector on each of the five innovation measures, a series of two-way ANOVA tests were performed. Lastly, regression analysis was used to determine the relative efficacy of market orientation (MO), learning orientation (LO) and country in predicting innovation in a business. The results demonstrate that unlike firm size, gender and level of education, which have no association with innovation, there is a strong association between market orientation, learning orientation, owner/managers age and experience and innovation in the two countries. This positive association implies that SABs that are committed to, listen attentively to and learn proactively about their customers’ needs and expectations are better inclined to engage in all the different dimensions of innovation (product/service, process, marketing and organisational) than their counterparts who do not engage in these activities. Among other drivers of innovation, market orientation emerged as the main predictor implying that SABs that invest more in marketing tend to be better innovators than those that invest in learning irrespective of their country of operation. The study also revealed that younger owner/managers of SABs tend to be more innovative than their older, experienced counterparts. The study makes an important contribution to literature on the drivers of innovation in small accommodation businesses in developing economies by dispelling firm size, gender and level of education which were regarded as drivers of innovation across industries previously. Practice and policy wise, the study led to the development of a conceptual framework for investigating how best to drive innovation in local SABs in order to make them more competitive, survive and grow in the face of competition from large accommodation businesses that often happen to be multinational.

Thesis (M. Tech.) -- Central University of Technology, Free State, 2010