Natural vents in the Gulf of Mexico are actively expelling water and hydrocarbons. They are ubiquitous along continental margins, and I characterize a single vent in the Ursa Basin at leaseblocks MC852/853. Seismic data reveal that the vent is elevated ~75 meters above the seafloor and is roughly circular with a ~1.2 km diameter. A transparent zone centered underneath the vent extends to ~1500 meters below seafloor; this zone is commonly interpreted to record the presence of gas. There is a strong negative polarity seismic reflection that rises rapidly at the vent’s boundaries and is horizontal within a few meters of the seafloor beneath the vent edifice. I interpret that this reflection records a negative impedance contrast, marking the boundary between hydrate and water above and free gas and water below: it is the bottom-simulating reflector. Salinities beneath the vent increase from seawater concentrations to >4x seawater salinity one meter below seafloor. Temperature gradients within the vent are ~15x the background geothermal gradient. I model the coexistence of high salinity fluids, elevated temperature gradients, and an uplifted bottom-simulating reflector with two approaches. First, I assume that high salinity fluids are generated by dissolution of salt bodies at depth and that these hot, saline fluids are expelled vertically. Second, I model the solidification of gas hydrate during upward flow of gas and water. In this model, free gas combines with water to form hydrate: salt is excluded and heat is released, resulting in the generation of a warm, saline brine. The two models result in predictable differences of salinity and temperature. A better understanding of the hydrogeological processes at vent zones is important for quantifying the fluxes of heat and mass from submarine vents and is important for understanding the conditions under which deep-sea biological vent communities exist. / text

Uniaxial consolidation experiments on Mass Transport Deposit (MTD) and non-MTD core samples from Ursa Basin, Gulf of Mexico, show MTDs have a lower porosity at a given effective stress compared to adjacent non-MTD sediments; a behavior observed in additional experiments on lab remolded Ursa core and resedimented Boston Blue Clay (BBC). I hypothesize debris flow action remolded the sediment: removing its stress history through shearing action, resulting in dense sediments at shallow depth. I supplement testing this hypothesis through lab remolding of BBC (in addition to Ursa clay) due to the greater availability and knowledge of this material. Ursa MTDs record multiple submarine slope failure events within the upper 200 meters below sea floor (mbsf); the most prominent is labeled MTD-2. MTDs have lower porosity and higher bulk density than surrounding, non-MTD, sediment. Porosity ([phi]) is 52% at 125mbsf – immediately below MTD-2; whereas [phi] is 46% at 115mbsf – within MTD-2. Comparison of non-MTD samples to MTD-2 samples, and intact to remolded samples, shows a decrease in sediment compressibility (Cc) within the MTD-2 and remolded sediments. Permeability within Ursa mudstones also declines with porosity according to: log (k) = A[phi] - B. Permeability is slightly higher within MTD-2; however grain size analysis indicates lower clay content in MTD-2 versus the non-MTDs. Pre-consolidation stress interpretations from the experiments show a linear trend in both MTD and non-MTD sediments, indicating both geologic units depict the same pore pressure profile. Remolding via debris flow explains the origin of MTDs at Ursa and governs the evolution of this geologic unit to its dense, highly consolidated, state today. At some point, slope failure triggered movement of the sediment down slope in form of a debris flow. The shearing action of the debris flow weakened the sediment, reducing its ability to support the overburden. As consolidation resumed, the remolded sediment followed a new, less steep, Cc curve. Within the geologic record, a distinctive dense, shallow unit is preserved; evidence for historical slope failure. / text

Submarine landslides retrogressively fail from intact material at the headwall and then become fluidized by strain weakening; the final deposits of these flows have low porosity, which controls their character in seismic reflection data. Submarine landslides occur on the open slope and also localized areas including margins of turbidite channel-levee systems. I develop and quantify this model with 3-D seismic reflection data, core and log data from Integrated Ocean Drilling Program Expedition 308 (Ursa Basin, Gulf of Mexico), flume experiments, and numerical modeling. At Ursa, multiple submarine slides over the last 60 ky are preserved as mass transport deposits (MTDs). Retrogression proceeded from an initial slope failure that created an excavated headwall, which reduced the horizontal stress behind the headwall and resulted in normal faults. Fault blocks progressively weakened until the gravitational driving stress imposed by the bed slope exceeded soil strength, which allowed the soil to flow for more than 10 km away from the source area. The resulting MTDs have lower porosity (higher bulk density) relative to non-failed sediments, which ultimately produces high amplitude reflections at the base and top of MTDs. In the laboratory, I made weak (low yield strength) and strong flows (high yield strength) from mixtures of clay, silt, and water. Weak flows generate turbidity currents while moving rapidly away from the source area. They create thin and long deposits with sinuous flow features, and leave behind a relatively smooth and featureless source area. In contrast, strong flows move slowly, do not generate a turbidity current, and create blocky, highly fractured source areas and short, thick depositional lobes. In Pleistocene turbidite channels of the Mississippi Fan, deep-seated rotational failures occurred in the flanking levees. The rotational failures displaced material into the channel from below where it became eroded by turbidity flows. This system achieved a delicate steady state where levee deposition and displacement along the fault into the channel was balanced by erosion rate of turbidity flows. This work enhances our understanding of geohazards and margin evolution by illuminating coupled processes of sedimentation, fluid flow, and deformation on passive continental margins. / text