One of the greatest challenges facing the nuclear power industry is the final disposition of nuclear waste. To meet the needs of the nuclear power industry, a new fuel assembly design, called DUPLEX, has been developed which provides higher fuel burnups, burns transuranic waste while reducing minor actinides, reduces the long term radiotoxicity of spent nuclear fuel, and was developed for use in current light water reactors. The DUPLEX design considered in this thesis is based on a seed and blanket unit (SBU) configuration, where the seed region contains standard UO2 fuel, and the blanket region contains an inert matrix (Pu,Np,Am)O2-MgO-ZrO2 fuel. The research efforts of this thesis are first to consider the higher burnup effects on DUPLEX assembly thermal-hydraulic performance and thermal safety margin over the assembly’s expected operational lifetime. In order to accomplish this, an existing burnup-dependent thermal-hydraulic methodology for conventional homogeneous fuel assemblies has been updated to meet the modeling needs specific to SBU-type assemblies. The developed framework dramatically expands the capabilities of the latest thermal-hydraulic evaluation framework such that the most promising and unique DUPLEX fuel design can be evaluated. As part of this updated methodology, the posed DUPLEX design is evaluated with respect to the minimum departure from nucleate boiling ratio, peak fuel temperatures for both regions, and the peak cladding temperatures, under ANS Condition I, II, and III transient events with the thermal-hydraulic code VIPRE-01. Due to difficulty in the fabrication and handling of minor actinide dioxides, documented thermal conductivity values for the considered IMF design are unavailable. In order to develop a representative thermal conductivity model for use in VIPRE-01, an extensive literature survey on the thermal conductivity of (Pu,Np,Am)O2-MgO-ZrO2 component materials and a comprehensive review of combinatory models was performed. Using the updated methodology, VIPRE-01 is used to perform steady-state and transient thermal hydraulic analyses for the DUPLEX fuel assembly. During loss-of-flow accident scenarios, the DUPLEX design is shown to meet imposed safety criteria. However, using the most conservative thermal conductivity modeling approach for (Pu,Np,Am)O2-MgO-ZrO2, the blanket region fuel temperatures remain only slightly below the design limit.

Two new fuel assembly designs for light water reactors using advanced mixed-oxide fuels have been proposed to reduce the radiotoxicity of used nuclear fuel discharged from nuclear power plants. The research efforts of this thesis are the first to consider the effects of burnup on advanced mixed-oxide fuel assembly performance and thermal safety margin over an assembly?s expected operational burnup lifetime. In order to accomplish this, a new burnup-dependent thermal-hydraulic analysis methodology has been developed. The new methodology models many of the effects of burnup on an assembly design by including burnup-dependent variations in fuel pin relative power from neutronic calculations, assembly power reductions due to fissile content depletion and core reshuffling, and fuel material thermal-physical properties. Additionally, a text-based coupling method is developed to facilitate the exchange of information between the neutronic code DRAGON and thermal-hydraulic code VIPRE-01. The new methodology effectively covers the entire assembly burnup lifetime and evaluates the thermal-hydraulic performance against ANS Condition I, II, and III events with respect to the minimum departure from nucleate boiling ratio, peak cladding temperatures, and fuel centerline temperatures. A comprehensive literature survey on the thermal conductivity of posed fuel materials with burnup-dependence has been carried out to model the advanced materials in the thermal-hydraulic code VIPRE-01. Where documented conductivity values are not available, a simplified method for estimating the thermal conductivity has been developed. The new thermal conductivity models are based on established FRAPCON-3 fuel property models used in the nuclear industry, with small adjustments having been made to account for actinide additions. Steady-state and transient thermal-hydraulic analyses are performed with VIPRE- 01 for a reference UO2 assembly design, and two advanced mixed-oxide fuel assembly designs using the new burnup-dependent thermal-hydraulic analysis methodology. All three designs maintain a sufficiently large thermal margin with respect to the minimum departure from nucleate boiling ratio, and maximum cladding and fuel temperatures during partial and complete loss-of-flow accident scenarios. The presence of a thin (Am,Zr)O2 outer layer on the fuel pellet in the two advanced mixed-oxide fuel assembly designs increases maximum fuel temperatures during transient conditions, but does not otherwise greatly compromise the thermal margin of the new designs.