Within the transit industry it is well known that transit buses have the potential to operate at weights that exceed vehicle weight limits. However, few attempts have been made to date to determine how often this occurs and to what degree. This research characterizes the current transit industry with respect to the regulatory environment, factors that have affected the weight of modern day transit buses, and methods for accommodating transit buses in pavement design. This research then develops and applies a methodology for calculating the in-service weights of standard 40-ft. transit buses using a combination of passenger characteristic data, transit bus curb weight data, and transit ridership data. The findings of this research suggest that the transit bus industry is in a state of competing interests. Weight estimates developed in this research identify that current transit bus models are unable to comply with vehicle weight limits in most jurisdictions even with no passengers on board. Further, these estimates indicate that transit buses have a significant impact on pavements – comparable to those of fully-loaded, five-axle semi-trucks on a per vehicle basis. To date this issue has been addressed in the Canadian Prairie Region by indefinitely granting transit buses overweight permits. However, based on the current state of the transit industry there is little incentive for transit agencies to operate lightweight transit buses and little incentive for transit bus manufacturers to produce lightweight transit buses in order to address pavement and regulatory concerns. Consequently, transit bus axle weight issues in the Canadian Prairie Region are expected to continue in the foreseeable future. / October 2015

No description available.

The diploma work focuses on the proposal of formula car support frame type alternative designed for international students´ competition Formula Student. As a first is this competition shortly described. Following basic information about possible support frame in competition, the rules description for the frame from thin-walled profiles as well as for composite structure. As the other are shown the most used material types by the tube frames. Continues the practical (design) part of the work. The work continues in construction/design part. Here are mentioned the requirements for the frame creating, calculation of each torsion strength and construction proposal including creating the analysis model. In the final part is realize the simulation in FEM program and simply described the alternative proposal together with the evaluation.

No description available.

The design and analysis of an automotive structure is an important stage of the vehicle design process. The structural characteristics have significant impact on the vehicle performance. During the design process it is necessary to have knowledge about the structural characteristics; however in the preliminary design stages detailed information about the structure is not available. During this period of the design process the structure is often simplified to a representative model that can be analyzed and used as the input for the detailed design process. A vehicle model is developed based on the space frame structures where the frame is the load carrying portion of the structure. Preliminary design analysis is conducted using a static load condition applied to the vehicle as pure bending and pure torsion. The deflections of the vehicle based on these loading conditions are determined using the finite element method which has been implemented in developed software. The structural response, measured as the bending and torsion stiffness, is used to evaluate the structural design. An optimization program is implemented to improve the structural design with the goal of reducing weight while increasing stiffness. Following optimization the model is completed by estimating suitable plate thicknesses using a method of substructure analysis. The output of this process will be an optimized structural model with low weight and high stiffness that is ready for detailed design. / UOIT