Spelling suggestions: "subject:"viscoelastic damping"" "subject:"viscoelastic camping""
1 |
Multi Layer Visco-Elastic Damping DevicesSaleh, Mohammed Saleh Rezk 20 December 2022 (has links)
No description available.
|
2 |
Active Vibration Control Synthesis Using Viscoelastic Damping PhenomenaVadiraja, G K 07 1900 (has links) (PDF)
In this thesis, a new method is followed to design an active control system which imparts viscoelastic phenomenological damping in an elastic structure. Properties of a hypothetical viscoelastic system are used to design an active feedback controller for an undamped structural system with distributed sensor, actuator and controller. The variational structure is projected on a solution space of a closed-loop system involving a weakly damped structure with distributed sensor and actuator with controller. These controller components assign the phenomenology based on internal strain rate damping parameter of a viscoelastic system to the undamped elastic structure.
An elastic cantilever beam with proportional-derivative controller and displacement feedback is considered in all the design formulations. In the first part of the research, a closed-loop control system is designed using two time domain modern control system design methods, pole placement and optimal pole placement, which use viscoelastic damping parameter. Equation of motion of a viscoelastic system is employed to synthesize the desired closed-loop poles. Desired poles are then assigned to an elastic beam with an active controller. Time domain finite element formulation is used without considering actuator-sensor dynamics and the effect of transducer locations. Characteristics of closed-loop system gains are found as a function of desired damping parameter and realization of damping have been analyzed with closed loop system pole positions.
The next part consists of a novel frequency domain active control system design to impart desired viscoelastic characteristics, which uses spectral method and the exact dynamic stiffness matrix of the system. In the first case, a sub-optimal local control system for a cantilever beam, with collocated actuator and sensor is designed. In the second case, a closed-loop local controller for an elastic system with non-collocated transducers is designed. Next, a global controller for non-collocated arrangement of sensor-actuator is designed by considering all the degrees-of freedom in the system, which leads to solving an eigenvalue problem. The reason for the failure of the collocated arrangement in global control is also explained. In this novel control system design method transducer dynamics and locations are considered in the formulation.
In frequency domain design, the frequency responses of the system show satisfactory performance of the closed-loop elastic system. The closed-loop system is able to reproduce the desired viscoelastic characteristics as targeted in the design. Optimal and sub-optimal system gains are found as functions of transducer locations, transducer properties, excitation frequency and internal strain rate damping parameter of a hypothetical viscoelastic system. Performance of the closed loop system is established by comparing the specific damping capacity of the hypothetical viscoelastic system with that of the closed-loop elastic system. The novel frequency domain method is simple, accurate, efficient and can be extended to complex structures to achieve desired damping. The method can be a better way of designing structures with variable stiffness which has research potential in designing morphing airplanes/spacecrafts. The ultimate goal of this research is that, if this design method is applied to practical applications such as aircraft wings, where vibration is undesirable, one would be able to achieve strength and desired damping characters simultaneously.
|
3 |
The Dynamic Analysis of a Composite Overwrapped Gun Barrel with Constrained Viscoelastic Damping Layers Using the Modal Strain Energy MethodHall, Braydon Day 01 May 2013 (has links)
The effects of a composite overwrapped gun barrel with viscoelastic damping layers are investigated. Interlaminar stresses and constrained layer damping effects are described. The Modal Strain Energy method is developed for measuring the extent to which the barrel is damped. The equations of motion used in the finite element analysis are derived. The transient solution process is outlined. Decisions for selected parameters are discussed. The results of the finite element analyses are presented using the program written in FORTRAN. The static solution is solved with a constant internal pressure resulting in a calculated loss factor from the Modal Strain Energy Method. The transient solution is solved using the Newmark-Beta method and a variable internal pressure. The analyses conclude that strategically placed viscoelastic layers dissipate strain energy more effectively than a thick single viscoelastic layer. The optimal angle for maximizing the coefficient of mutual influence in a composite cylinder is not necessarily the optimal angle when viscoelastic layers are introduced between layers.
|
4 |
MECHANICS AND DESIGN OF POLYMERIC METAMATERIAL STRUCTURES FOR SHOCK ABSORPTION APPLICATIONSAmin Joodaky (9226604) 12 August 2020 (has links)
<div>This body of work examines analytical and numerical models to simulate the response of structures in shock absorption applications. Specifically, the work examines the prediction of cushion curves of polymer foams, and a topological examination of a $\chi$ shape unit cell found in architected mechanical elastomeric metamaterials. The $\chi$ unit cell exhibits the same effective stress-strain relationship as a closed cell polymer foam. Polymer foams are commonly used in the protective packaging of fragile products. Cushion curves are used within the packaging industry to characterize a foam's impact performance. These curves are two-dimensional representations of the deceleration of an impacting mass versus static stress. The main drawback with cushion curves is that they are currently generated from an exhaustive set of experimental test data. This work examines modeling the shock response using a continuous rod approximation with a given impact velocity in order to generate cushion curves without the need of extensive testing. In examining the $\chi$ unit cell, this work focuses on the effects of topological changes on constitutive behavior and shock absorbing performance. Particular emphasis is placed on developing models to predict the onset of regions of quasi-zero-modulus (QZM), the length of the QZM region and the cushion curve produced by impacting the unit cell. The unit cell's topology is reduced to examining a characteristic angle, defining the internal geometry with the cell, and examining the effects of changing this angle.</div><div>However, the characteristic angle cannot be increased without tradeoffs; the cell's effective constitutive behavior evolves from long regions to shortened regions of quasi-zero modulus. Finally, this work shows that the basic $\chi$ unit cell can be tessellated to produce a nearly equivalent force deflection relationship in two directions. The analysis and results in this work can be viewed as new framework in analyzing programmable elastomeric metamaterials that exhibit this type of nonlinear behavior for shock absorption.</div>
|
Page generated in 0.0552 seconds