There is a trend to move the frequency band for wireless transmission to ever higher frequencies in the radio frequency (RF) spectrum to fulfil the exponentially increasing demand in wireless communication capacity. Research work has gone into improving the spectral efficiency of wireless communication system to use the scarce and expensive resources in the most efficient way. However, to make wireless communication future-proof, it is essential to explore ways to transmit wirelessly outside the traditional RF spectrum. The visible light (VL) spectrum bandwidth is 1000 times wider than the entire 300 GHz RF spectrum and is, therefore, a viable alternative. Visible light communication (VLC) enables existing lighting infrastructures to provide not only illumination but also wireless communication. In conjunction with the concept of cell densification, a networked VLC system, light fidelity attocell (LAC) network, has been proposed to offer wide coverage and high speed wireless data transmission. In this study, many issues related to the downlink system in LAC networks have been investigated. When analysing the downlink performance of LAC networks, a large number of random channel samples are required for the empirical calculation of some system metrics, such as the signal-to-interference-plus-noise ratio (SINR). However, using state-of-the-art approaches to calculate the non-line-of-sight (NLoS) channel component leads to significant computational complexity and prolonged computation time. An analytical method has been presented in this thesis to efficiently calculate the NLoS channel impulse response (CIR) in VLC systems. The results show that the proposed method offers significant reduction in computation time compared to the state-of-the-art approaches. A comprehensive performance evaluation of the downlink system of LAC networks is carried out in this thesis. Based on the research results in the literature in the field of optical wireless communication (OWC), a system level framework for the downlink system in LAC networks is developed. By using this framework, the downlink performance subject to a large number of parameters is evaluated. Additionally, the effect of varying network size, cell deployment and key system parameters are investigated. The calculation of downlink SINR statistics, cell data rate and outage probability are considered and analysed. The results show that the downlink performance of LAC networks is promising in terms of achievable data rate per unit area compared to other state-of-the-art RF small-cell networks. It is found that co-channel interference (CCI) is a major source of signal impairment in the downlink of LAC network. In order to mitigate the influence of CCI on signal distortion in LAC networks, widely used interference mitigation techniques for RF cellular systems are borrowed and extensively investigated. In this study, fractional frequency reuse (FFR) is adapted to the downlink of LAC networks. The SINR statistics and the spectral efficiency in LAC downlink system with FFR schemes are evaluated. Results show that the FFR technique can greatly improve the performance of cell edge users and as well the overall spectral efficiency. Further performance improvements can be achieved by incorporating angular diversity transmitters (ADTs) with FFR and coordinated multi-point joint transmission (JT) techniques.

Visible Light Positioning (VLP) uses modulated LED luminaries to help locate a receiver inside a building. Indoor positioning is becoming an increasingly important service, and visible light has many advantages over other technologies used in indoor positioning systems (IPS). However existing VLP approaches have major drawbacks in robustness that have hindered their ability to be commercially deployed. This work proposes and demonstrates a new way of using light signals in an indoor localization system, titled Angular Diversity Visible Light Positioning (AD-VLP). AD-VLP uses optics at the transmitter to create a structured overlapping light pattern that can be used for positioning. This method is shown to have several advantages over existing VLP approaches, including increased robustness over intensity based techniques while still using a single element receiver. This work also includes an experimental implementation of the proposed AD-VLP system using existing mobile device technology. The experiments prove that sub-meter accuracy is obtainable, even when the receiver is oriented away from the transmitter. / Thesis / Master of Applied Science (MASc)

Wireless communication is a form of communication that has been around for over hundreds of years and is the fastest growing segment of the communication industry. Today, wireless communication has become an essential part of almost everyone’s daily life, and the number of users has increased exponentially over the last decade with the introduction of the internet, mobile devices and smart phones. Radio Frequency (RF) transmission is arguably the most popular method of communication and is available worldwide. With the rapid progress in technology and the increase of number of users, the limited RF spectrum is becoming more congested which led to numerous research efforts to find an alternative that can help to alleviate the pending problem. One of the proposed solutions is Visible Light Communication (VLC), which uses visible Light Emitting Diode (LED) for data transmission. In this thesis, three integrated microLED/Complementary Metal Oxide Semiconductor (CMOS) Integrated Circuits (ICs) are presented with the main aim of increasing the data rate of transmission. The first microLED/CMOS IC presented here is the Generation V microLED/CMOS driver which represents the continuation of the earlier work in the HYPIX project, which aimed to develop a microLED/CMOS driver to optically pump an organic polymer laser. A 40x10 pixelarray of Generation V microLED/CMOS driver was thus designed, primarily for optical pumping polymer lasing purposes, but has also demonstrated the ability to perform communication transmission using an On-Off Keying (OOK) modulation scheme. The driver consumes up to 330mA current and produces approximately 12mW of optical power from a single pixel, which is about 3 times higher than its predecessor. The second microLED/CMOS IC is the microLED/CMOS Current Feedback (CCFBK) driver which was designed to facilitate Orthogonal Frequency Division Multiplexing (OFDM) modulation. OFDM is one of the modulation schemes, adopted from the RF domain, that was proposed to be implemented in VLC in order to increase the data transmission rate. To the best of the author’s knowledge, the microLED/CCFBK driver is the first CMOS driver for microLED that was designed to perform analogue modulation for VLC purposes. The driver is characterised and shows the ability to produce up to 3.5mW of optical power with a data transmission rate of up to 486Mbit/s. The microLED/CMOS Optical Feedback (COFBK) driver is the third microLED/CMOS IC presented in this thesis. The driver looks to improve on the performance of the microLED/CCFBK driver. OFDM transmission requires high linearity to ensure low Bit Error Rate (BER) transmission. However, the optical power output of an LED is not, in general, linear with the input voltage signal. The microLED/COFBK driver looks to increase the linearity of the optical power output by integrating a microLED and a photodiode in a single pixel to create a feedback loop. Once again, to the best of the author’s knowledge, the microLED/COFBK driver is the first CMOS driver for microLED which integrates both optical source and sensor in a single pixel to help linearise the optical power output for communication purposes; in this case, VLC. For a similar range of optical power, the microLED/COFBK driver shows a reduction about 5.3% in the degree of non-linearity compared to the microLED/CCFBK driver and produces lower Total Harmonic Distortion (THD). The microLED/COFBK driver showed the potential to increase the data rate by a factor of four over that of microLED/CCFBK driver. The analogue modulated microLED/CMOS ICs described here are the first-generation drivers that have demonstrated the possibilities to increase the data rate using OFDM. A number of possible design improvements have been identified which will enhance future performance and integration with the standard VLC system.

No description available.

Indiana University-Purdue University Indianapolis (IUPUI) / Recently witnessed a great popularity of unobtrusive Visible Light Communication (VLC) using screen-camera channels. They overcomes the inherent drawbacks of traditional approaches based on coded images like bar codes. One popular unobtrusive method is the utilizing of alpha channel or color channels to encode bits into the pixel translucency or color intensity changes with over-the-shelf smart devices. Specifically, Uber-in-light proves to be an successful model encoding data into the color intensity changes that only requires over-the-shelf devices. However, Uber-in-light only exploit Multi Frequency Shift Keying (MFSK), which limits the overall throughput of the system since each data segment is only 3-digit long. Motivated by some previous works like Inframe++ or Uber-in-light, in this thesis, we proposes a new VLC model encoding data into color intensity changes on red and blue channels of video frames. Multi-Phase-Shift-Keying (MPSK) along with MFSK are used to match 4-digit and 5-digit long data segments to specific transmission frequencies and phases. To ensure the transmission accuracy, a modified correlation-based demodulation method and two learning-based methods using SVM and Random Forest are also developed.

No description available.

The Internet-of-Things (IoT) infrastructure is made of uniquely identifiable wireless-enabled smart devices that use the Internet to communicate with each other as well as people, on a large scale. These IoT devices require power to operate, and to communicate with other smart devices. The optical bands have the capacity to provide power and wireless communication to the IoT devices. Simultaneous lightwave information and power transmission (SLIPT) is a technology through which information and optical power are received simultaneously by the receiver. SLIPT is made possible by solar cell-based SLIPT receivers. In this thesis, for the first time, the trade-off between the achievable data rate and the harvested power in solar cell-based SLIPT systems is quantified and analysed. It is known that the amount of power harvested using a solar cell is dependent on its operating voltage. By utilizing a realistic electrical model of the solar cells, an expression for the bandwidth and a lower bound on the data rate of a solar cell receiver as function of the operating voltage is derived. Using the dependency of rate and power on the operating voltage, the rate-power trade-off in solar cell based SLIPT receivers are studied in this thesis. This work proposes a novel solar cell based SLIPT receiver that includes a DC-DC boost converter, which allows control over the operating voltage of the solar cell. Finally, this thesis proposes an optimization problem to compute the optimum operating voltage for a SLIPT system located indoor where a desired trade-off between the data rate and harvested power can be attained based on the battery state of charge. / Thesis / Master of Applied Science (MASc)

The amount of wireless data traffic has been increasing exponentially. This results in the shortage of radio frequency (RF) spectrum. In order to alleviate the looming spectrum crisis, visible light communication (VLC) has emerged as a supplement to RF techniques. VLC uses light emitting diodes (LEDs) for transmission and employs photodiodes (PDs) for detection. With the advancement of the LED technology, LEDs can now fulfil two functions at the same time: illumination and high-speed wireless communication. In a typical indoor scenario, each single light fixture can act as an access point (AP), and multiple light fixtures in a room can form a cellular wireless network. We refer to this type of networks as ‘optical attocell network’. This thesis focuses on interference mitigation in optical attocell networks. Firstly, the downlink inter-cell interference (ICI) model in optical attocell networks is investigated. The conventional ray-tracing channel model for non-line-of-sight (NLOS) path is studied. Although this model is accurate, it leads to time-consuming computer simulations. In order to reduce the computational complexity, a simplified channel model is proposed to accurately characterise NLOS ICI in optical attocell networks. Using the simplified model, the received signal-to-interference-plus-noise ratio (SINR) distribution in optical attocell networks can be derived in closed-form. This signifies that no Monte Carlo simulation is required to evaluate the user performance in optical attocell networks. Then, with the knowledge of simplified channel model, interference mitigation techniques using angle diversity receivers (ADRs) are investigated in optical attocell networks. An ADR typically consists of multiple PDs with different orientations. By using proper signal combining schemes, ICI in optical attocell networks can be significantly mitigated. Also, a novel double-source cell configuration is proposed. This configuration can further mitigate ICI in optical attocell networks in conjunction with ADRs. Moreover, an analytical framework is proposed to evaluate the user performance in optical attocell networks with ADRs. Finally, optical space division multiple access (SDMA) using angle diversity transmitters is proposed and investigated in optical attocell networks. Optical SDMA can exploit the available bandwidth resource in spatial dimension and mitigate ICI in optical attocell networks. Compared with optical time division multiple access (TDMA), optical SDMA can significantly improve the throughput of optical attocell networks. This improvement scales with the number of LED elements on each angle diversity transmitter. In addition, the upper bound and the lower bound of optical SDMA performance are derived analytically. These bounds can precisely evaluate the performance of optical SDMA systems. Furthermore, optical SDMA is shown to be robust against user position errors, and this makes optical SDMA suitable for practical implementations.

This thesis presents the synthesis and characterization of copper oxide nano photocatalyst for wastewater purification using visible light. The presented copper oxide nano material can serve as a low-cost and green technology for environmental applications. Uniform cubic, octahedral and rhombic dodecahedral Cu2O nano crystals with a size of 300-600 nm were synthesized using a simple hydrothermal method. The rhombic dodecahedral Cu2O nano crystals are highly active when driven by low-power white LEDs as a light source. In comparison with other reported photocatalysts, the Cu2O nano crystals in this work show a much higher reaction rate and lower electrical energy per order. The reaction rate and photoefficiency are found to be highly correlated with the irradiated photon flux. The surface termination and facet orientation of Cu2O nano particles were accurately tuned by adjusting the amount of hydroxylamine hydrochloride and surfactant. It is found that Cu2O nano particles with Cu-terminated (110) or (111) surfaces show high photocatalytic activity, while other exposed facets show poor reactivity. The density functional theory simulations confirm that the sodium dodecyl sulfate surfactant can lower the surface free energy of Cu-terminated surfaces, increasing the density of exposed Cu atoms at the surfaces, and thus benefiting the photocatalytic activity. It also shows that the poor reactivity of Cu-terminated Cu2O (100) surface is due to the high energy barrier of holes at the surface region. Amorphous CuxO nano flakes with a thickness of 10 to 50 nm were prepared through the dye-assisted transformation of rhombic dodecahedral Cu2O nano crystals under facile hydrothermal condition. The amorphous CuxO nano flake consists of a combination of Cu(I) and Cu(II) with a ratio close to 1:1. It shows enhanced photocatalytic reactivity towards the degradation of methyl orange compared to rhombic dodecahedral Cu2O nano crystals with all active (110):Cu facets. The chemical composition and architecture remain the same after repeating degradation tests. The high surface-to-volume ratio contributes to its better photocatalytic performance while its low surface energy calculated by the density functional theory simulations explains its improved stability. The as-obtained photocatalysts are able to degrade a wide range of aromatic organics including toluene, chlorobenzene and nitrobenzene effectively. We also demonstrate the capability of decontaminating a wide range of aromatic organics in industrial wastewater that comes from an oil company.

Thesis advisor: Matthias M. Waegele / Studying the visible light-driven photoredox catalysis coupled with transition-metal complexes is of overriding importance in the development of synthetic strategy. Comparing to conventional thermal catalysis, reactions catalyzed and/ or initiated by photon energy are not only attractive for establishing a more sustainable system, but also for their unique reactivity that has previously been inaccessible. However, one issue draws our attention is that such photoredox catalytic schemes often suffer from a limited substrate scope. To develop more efficient and effective synthetic strategies applicable to broader range of substrates, it is of our interest to construct an functional and reliable instrument to identify the critical mechanistic steps that lead to low product yield. To this end, we designed a time-resolved visible-pump/ infrared-probe spectroscopic measurement technique to monitor reaction dynamics in-situ. Using our transmission infrared setup, we effectively demonstrated in-situ photoexcitation and decay process of Tris(2,2′-bipyridyl)dichlororuthenium(II) hexahydrate in deuterated acetonitrile. In addition, to optimize signal resolution, an electronic filter was installed in one of the data-collecting channels to allow for concurrent AC-coupled and DC-coupled signal recording. A series of chopper wheel experiments was conducted to assure the functionality of the system and reliability of obtained data. / Thesis (MS) — Boston College, 2020. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Chemistry.