Silicic volcanism in the central Oregon Cascade range has decreased in both the size and frequency of eruptions from its initiation at ~40 Ma to present. The reasons for this reduction in silicic volcanism are poorly constrained. Studies of the petrogenesis of these magmas have the potential for addressing this question by providing insight into the processes responsible for producing and erupting silicic magmas. This study focuses on two extensive and well-preserved ash-flow tuffs from within the ~4-8 Ma Deschutes Formation of central Oregon, which formed after the transition from Western Cascade volcanism to the modern High Cascade. Documentation of outcrop extent, outcrop thickness, clast properties, and samples provide the means to estimate a source location, minimum erupted volumes, and to constrain eruptive processes. Major and trace element chemistry of glass and minerals constrain the petrogenesis and chemical evolution of the system. The tuffs selected for this study, the Lower Bridge and McKenzie Canyon, are the first known silicic units originating from the Cascade Arc following the reorganization from Western Cascade to High Cascade Volcanism at ~8 Ma. These eruptions were significant in producing a minimum of ~5 km�� DRE each within a relatively short timeframe. These tuffs are sourced from some vent or edifices related to the Three Sisters Volcanic Complex, and capture an early phase of the volcanic history of that region. The chemical composition of the tuffs indicates that the Lower Bridge erupted predominately rhyolitic magma with dacitic magma occurring only in small quantities in the latest stage of the eruption while McKenzie Canyon Tuff erupted first as a rhyolite and transitioned to a basaltic andesite with co-mingling and incomplete mixing of the two magma types. Major and trace element concentrations in minerals and glass indicate that the basaltic andesite and rhyolite of the McKenzie Canyon Tuff were well convected and stored in separate chambers. Geothermometry of the magmas indicate that the rhyolites are considerably warmer (~850��) than typical arc rhyolites. Trace element compositions indicate that both the Lower Bridge and McKenzie Canyon Tuff experienced mixing between a mantle derived basaltic melt and a rhyolitic partial melt derived from gabbroic crust. Rhyolites of the Lower Bridge Tuff incorporate 30-50% partial melt following 0->60% fractionation of mantle derived melts. The McKenzie Canyon Tuff incorporates 50-100% of a partial melt of a mafic crust with up to 15% post mixing fractionation. The results of this study suggest that production of voluminous silicic magmas within the Cascade Arc crust requires both fractionation of incoming melts from the mantle together with mixing with partial melts of the crust. This provides a potential explanation for the decrease in silicic melt production rates from the Western Cascades to the High Cascades related to declining subduction rate. As convergence along the Cascade margin became more oblique during the Neogene, the consequent slowing rate of mantle melt production will result in a net cooling of the crust, inhibiting the production of rhyolitic partial melts. Without these partial melts to provide the rhyolitic end member to the system, the system will evolve to the mafic melt and fractionation dominated regime that has existed along Cascadia throughout the Quaternary. / Graduation date: 2013

Large-volume silicic ignimbrites erupt from reservoirs that vary in composition, temperature, volatile content and crystallinity. The 9.7 Ma Devine Canyon Tuff (DCT) of eastern Oregon is a large-volume (>250 km3), compositionally zoned and variably welded ignimbrite. The ignimbrite exhibits heterogeneous trace element compositions, variable volatile content and crystallinity. These observations were utilized in the investigation into the generation, accumulation and evolution of the magmas composing the DCT. Building off previous research, pumices were selected from the range of trace element compositions and analyzed with respect to crystallinity, mineral abundances and assemblages. The DCT displays a gradational trace element enrichment and decrease in crystallinity from least evolved, dacite, at ~22% crystals to most evolved high-silica rhyolite at 3% crystals. Two distinct mineral populations of feldspar and clinopyroxene were identified in previous work, one belonging to the rhyolitic magma and the other to the dacitic magma. Volatile content derived from melt inclusion Fourier Transform Infrared (FTIR) spectrometer analysis revealed an increase in water content from 1.2 to 3.7 wt.% in the most evolved rhyolite. The DCT exhibits low and variable δ18O signatures, 4.52‰ to 5.76‰ , based on δ18O values measured on quartz and sanidine. Low δ18O signatures of all DCT rhyolites suggest the incorporation of hydrothermally altered crust into the melt. Furthermore, quartz phenocrysts from all high-silica rhyolite groups display dark oscillatory zoned cores and Ti-rich bright rims. These data provide insight into how these magmas were generated and subsequently stored in the crust. Commonalities of petrographic and compositional features among rhyolites, especially the zoning characteristics of quartz phenocrysts, exclude the possibility of storage and evolution in multiple reservoirs. Envisioning a scenario where all magmas are stored within a single reservoir prior to eruption and assuming rhyolites A and D are the product of partial melting. The mixing of A and D rhyolites produced rhyolite B, and subsequent mixing of intermediate rhyolite B and end-member rhyolite D generated rhyolite C. However, some trace element inconsistencies, between mixing model and observed intermediate rhyolites suggest a secondary process. Post mixing, rhyolites B and C require some modification by fractional crystallization to account for LREE and other inconsistencies between mixed models and observed rhyolites. Finally, the origin of the dacite is likely through mixing of group D rhyolite and an intrusive fractionated basalt, which could have led to the eruption of the Devine Canyon Tuff.

Rhyolite lava flows are found at two dome complexes at Graveyard Butte and Gordon Butte, Mount Hood Quadrangle, Oregon. At Graveyard Butte, the White River has cut a winding canyon 150 m deep, exposing at its base, a 40-meter-thick outcrop of flow-banded rhyolite (73 wt.% SiO2, 3.67±0.01 Ma) that laterally extends along the canyon wall for about 1 km. Stratigraphically above the flow-banded rhyolite is locally-erupted iron-rich andesites (lava flows, agglutinate and other pyroclastic rocks as well as clastic debris), a rhyolitic ash-flow tuff (74 wt.% SiO2), and the 2.77±0.36 Ma tholeiitic basalt lava flows of Juniper Flat (Sherrod and Scott, 1995). Roughly 2 km downstream, a phenocryst-poor, maroon-colored rhyolite (3.65±0.01 Ma) is visible again, forming steep canyon walls for about 1.6 km. A compositionally similar silicic unit is found 18 km to the northwest of Graveyard Butte at Gordon Butte. Exposed units along Gordon Butte's Badger Creek (3.64±0.03 Ma) and the southeastern upper slopes of Gordon Butte include rhyolite flows (69.6-72.1 wt.% SiO 2). The rhyolite lava flows at Graveyard Butte and Gordon Butte's Badger Creek are nearly chemically indistinguishable and both contrast with the younger rhyolitic ash-flow tuff at Graveyard Butte and lava flows on Gordon Butte's Upper Slopes. The rhyolites of Graveyard Butte and Badger Creek are richer in Nb and Zr (30-40 ppm and 487-530 ppm, respectively) than the younger rhyolitic tuff and Upper Slopes flows (13-19 ppm and 235-364 ppm, respectively) and share characteristics with A-type granitoids. The rhyolite lavas are porphyritic (~7%) with the porphyroclasts comprising primarily individual feldspars (250-500 µm in length) with ragged margins, oscillatory zoning and less commonly, spongy cores. Other phenocrystic phases include fayalitic olivine, Fe-rich clinopyroxene, and Fe-Ti oxides. A-type-like incompatible trace-element-enriched compositions as well as mineralogical indicators suggest rhyolite lava flows at Graveyard Butte and Gordon Butte's Badger Creek are likely generated in an extensional tectonic setting. A possible geotectonic framework for generation of these rhyolite lavas is the northward propagating intra-arc rift of the Oregon Cascades.