There is growing interest in commercial aircraft formation flight as a means of reducing both airspace congestion and the carbon footprint of air transportation. Wake vortex surfing has been researched extensively and proven to have significant fuel-saving benefits, however, commercial air transportation has yet to take advantage of these formation benefits due to understandable safety concerns. The realization of these formations requires serious consideration of formation contingencies and safety during closer-in maneuvering of large commercial aircraft. Formation contingency scenarios are much more complex than those of individual aircraft and have not yet been studied in depth. This thesis investigates the utility of optimization modeling in providing insight into generation of aircraft escape paths for formation contingency planning. Three high-altitude commercial aircraft formation scenarios are presented; formation join, formation emergency exit, and formation escape. The model-generated paths are compared with pilot-generated escape plans using the author’s pilot expertise. The model results compare well with pilot intuition and are useful in presenting solutions not previously considered, in evaluating separation requirements for improvement of escape path planning and in confirming the viability of the pilot-generated plans. The novel optimization model formulation presented in this thesis is the first model shown to be capable of generating escape paths comparable to pilot- generated escape plans and is also the first to incorporate avoidance of persistent and drifting wake turbulence within the formation.

L’écoulement de jeu dans les compresseurs axiaux est étudié à l’aide de la Zonal Detached Eddy Simulation (ZDES). L’objectif consiste à évaluer la capacité de méthodes hybrides URANS/LES à simuler l’écoulement de jeu d’un compresseur axial réaliste afin de mieux comprendre la physique de cet écoulement, notamment son comportement au vannage ainsi que l’effet de sillages venant du stator amont sur le rotor aval. Après avoir choisi la méthode hybride ZDES, un banc d’essai numérique est défini afin de simuler le premier rotor du compresseur de recherche CREATE. Ce banc a la particularité de pouvoir prendre en compte les effets instationnaires venant de la roue directrice d’entrée (RDE), notamment son sillage ainsi que les tourbillons générés en pied et en tête. Basé sur des critères de maillage ZDES, il est utilisé pour évaluer cette méthode comparativement aux méthodes classiques RANS et URANS. La ZDES est validée par étape jusqu’à une analyse spectrale de l’écoulement de jeu se basant sur des données expérimentales. Elle s’est révélée capable de capturer plus précisément l’intensité et la position des phénomènes instationnaires rencontrés en tête du rotor, notamment le tourbillon de jeu. Les densités spectrales de puissance analysées montrent que cela est dû en partie à une meilleure prise en compte du transfert d’énergie des grandes vers les petites structures de l’écoulement avant leur dissipation. De plus, l’écart entre les approches s’accentue lorsque le tourbillon de jeu traverse le choc en tête. Proche pompage, les effets d’interaction entre le choc, le tourbillon de jeu, la couche limite carter et le tourbillon venant de la tête de la RDE sont amplifiés. Le décollement de la couche limite carter s’accentue et une inversion locale de l’écoulement est observée. De plus, le tourbillon de jeu s’élargit et est dévié vers la pale adjacente, ce qui intensifie le phénomène de double écoulement de jeu. L’interaction du tourbillon venant de la tête de la RDE avec le choc et le tourbillon de jeu du rotor est ensuite étudiée au point de dessin. Un battement du tourbillon de jeu est rencontré lors de l’interaction de ce tourbillon avec le tourbillon de tête de la RDE, ce qui diminue le double écoulement de jeu. / The tip-leakage flow in axial compressors is studied with the Zonal Detached Eddy Simulation (ZDES). This study aims at evaluating the capability of hybrid URANS/LES methods to simulate the tip-leakage flow within a realistic axial compressor in order to better understand the involved physics, especially the behaviour of the flow near surge and the effects of stator wakes on the downstream rotor. Once the ZDES method is chosen, a numerical test bench is defined to simulate the first rotor of the research compressor CREATE. This bench takes into account the unsteady effects of the Inlet Guide Vane (IGV), such as its wake as well as vortices generated at the IGV hub and tip. It is based upon ZDES meshing criteria and is used to evaluate this method compared to classic RANS and URANS approaches. A method validation is carried out up to a spectral analysis compared to experimental data. The ZDES is capable to capture more accurately the intensity and position of the unsteady phenomena encountered in the tip region, especially the tip-leakage vortex. The power spectral densities highlight that this partly originates from a better capture of the energy transfer from large to small structures until their dissipation. The discrepancy between the methods is accentuated as the tip-leakage vortex crosses the shock. Near the surge line, the interactions between the shock, the tip-leakage vortex, the boundary layer developing on the shroud and the vortex generated by the IGV tip are amplified. The boundary layer on the shroud separates earlier and a local flow inversion occurs. Besides, the tip-leakage vortex widens and is deflected toward the adjacent blade. This strengthens the double leakage. At the design operating point, the interaction of the IGV tip vortex with the shock and the rotor tip vortex is studied. A vortex flutter is observed as the IGV tip vortex arrives on the rotor blade and stretches the rotor tip vortex. This phenomenon decreases the double leakage.