Yes / This paper presents the advantages of using a wideband spectrum adopting multi-carrier to improve targets localization within a simulated indoor environment using the Time of Arrival (TOA) technique. The study investigates the effect of using various spectrum bandwidths and a different number of carriers on localization accuracy. Also, the paper considers the influence of the transmitters’ positions in line-of-sight (LOS) and non-LOS propagation scenarios. It was found that the accuracy of the proposed method depends on the number of sub-carriers, the allocated bandwidth (BW), and the number of access points (AP). In the case of using large BW with a large number of subcarriers, the algorithm was effective to reduce localization errors compared to the conventional TOA technique. The performance degrades and becomes similar to the conventional TOA technique while using a small BW and a low number of subcarriers.

This research considers the problem of cooperatively identifying the active bands in a wideband spectrum using the sparse Fast Fourier Transform (sFFT). Existing research has focused primarily on Compressed Sensing (CS) and Multi-Coset (MC) sampling, but recent developments in the sFFT have shown that a sparsely occupied spectrum can be efficiently reconstructed using multiple co-prime analog-to-digital converters (ADC) that sample below the Nyquist rate. Specifically, this research utilizes the Robust Fast Fourier Aliasing-based Sparse Transform (R-FFAST) and extends this algorithm for use in cooperative wideband spectrum sensing (CWSS). Unlike previous approaches that implement the sFFT for spectrum sensing, the R-FFAST framework was developed and analyzed using the mutual coherence and the restricted isometry property (RIP) from CS theory. This leads to reliable support estimation in the presence of additive white Gaussian noise (AWGN) while mitigating the computational complexity of CS reconstruction algorithms. This research makes the following contributions. First, this research extends the signal model from single tones to multi-band signals with clustered support. Second, it shows that each stage in the R-FFAST front-end can be decomposed into individual nodes that form a fully distributed cooperative network. Lastly, this research empirically develops a constant false alarm rate (CFAR) detector that is used to identify the active frequency bins during the reconstruction process. The primary result of this research is showing that reliable spectrum detection is only possible when the average sampling rate of the cooperative network is greater than or equal to the sparsity of the spectrum. Simulation results are provided to demonstrate the effectiveness of the proposed framework and validate the findings of this research. / Electrical and Computer Engineering

No description available.

Several optimal detection frameworks for wideband/multichannel spectrum sensing in cognitive radio networks are proposed. All frameworks search for multiple secondary transmission opportunities over a number of narrowband channels, enhancing the secondary network performance while respecting the primary network integrity and keeping the interference limited. Considering a periodic sensing scheme with either uniform or non-uniform channel sensing durations, the detection problems are formulated as joint optimization of the sensing duration(s) and individual detector parameters to maximize the aggregate achievable secondary throughput capacity given some bounds/limits on the overall interference imposed on the primary network. It is demonstrated that all the formulated optimization problems can be solved using convex optimization if certain practical constraints are applied. Simulation results attest that the proposed frameworks achieve superior performance compared to contemporary frameworks. To realize efficient implementation, an iterative low-complexity algorithm which solves one of the optimization problems with much lower complexity compared to other numerical methods is presented. It is established that the iteration-complexity and the complexity-per-iteration of the proposed algorithm increases linearly with the number of optimization variables (i.e. the number of narrowband channels). / Communication

To explore spectral opportunities in wideband regime for cognitive radio we need a wideband spectrum sensing receiver. Current wideband receiver architectures need wideband analog to digital converter (ADC) to sample wideband signal. As current state-of-art ADC has limitation in terms of power and sampling rate, we need to explore some alternative solutions. Compressive sampling (CS) data acquisition method is one of the solutions. Cognitive Radio signal, which is sparse in frequency domain can be sampled at Sub-Nyquist rate using low rate ADC. To relax the receiver complexity in terms of performance requirement we can use Modulated Wideband Converter (MWC) architecture, a Sub-Nyquist sampling method. In this thesis circuit design of this architecture covers signal within a frequency range of 500 MHz to 2.1 GHz, with a channel bandwidth of 1600 MHz. By using 8 parallel lines with channel trading factor of 11, effective sampling rate of 550 MHz is achieved for successful support recovery of multi-band input signal of size N=12.