<p>During the last years commercial Wind Power Turbines (WPT) has become larger regardingto the generator sizes and hub heights. Available hub heights around 100 meters is nowcommon, which has led to profitability for WPT located in forests where there normally are tolow wind speeds. The current knowledgement regarding turbulence and the variation in thewind profile for the outcome of the power production for the WPT in forests is limited.In this Master of Science thesis an investigation concerning forest located wind power plantshas been made. The purpose has been to investigate if plants located in forest perform lesscompared to wind power turbines located at more common locations.The analyses are based on statically material for determining the availability,production/generator size, production/hub height, production/swept area and how thetopography affect the production results.The analyses show that the variation in production result for WPT located in forest comparedto turbines located at other locations is small. The availability is high and the productionresults are good.</p>

Over the last decade, wind penetration in the Pacific Northwest has increased rapidly. The variable nature of this massive new resource has increased stress on the hydropower resource to the point where system limits are currently being reached. In order to cultivate continued growth of the wind energy industry both in the Pacific Northwest and the rest of the world, something must be added to help mitigate the effects of the variability of wind power. This research aims to show what can be done by adding energy storage to a wind farm. A novel model predictive control structure has been created with the focus of increasing the dispatchability and reliability of wind farm power output along with allowing participation in frequency regulation. First, the effectiveness of the addition of energy storage with simple control is explored. This is followed by a study on the performance of the system when predictive control is added. Finally, a cost analysis is performed to assess the level of savings and potential profitability of the simulated system. Conclusions support the use of an energy storage resource for more reliable wind farm performance. However, storage technologies are still approaching the price point needed to ensure profitability. / Graduation date: 2012

The introduction of large amounts of wind power into power systems will increase the production uncertainties due to unforeseen wind power production variations. This will have a significant impact on the required balance management quantities. The most suitable power source to balance fast production or consumption variations is hydropower because of its flexibility and low operational costs. This thesis addresses the problem of trading of electricity on the daily marketfrom a hydropower producer perspective in a system with large amounts of wind power. The overall aim is to present models that can be used in the trading decision process. This thesis describes models within three different areas:1. Modeling of the demand for balancing power by using deterministic andstochastic models. The stochastic models are based on stochastic differentialequations.2. Modeling of prices on the day-ahead and real-time markets using deterministic and stochastic models. The stochastic models are based on time series modeling.3. Short-term hydropower scheduling of trading decisions. These problems areformulated as stochastic optimization problems where the market prices arerandom variables. The first two can be used to simulate the impact of wind power on various market prices, while the third simulates how the hydropower producer responds to market prices. Thereby, the thesis presents the necessary models for short-term scheduling of hydropower for a future system with significant amounts of wind power. This thesis concludes that the proposed price models are sufficient to reflect the relevant price properties, and that the proposed short-term hydropower scheduling models can be used to simulate the actions taken by the hydropower producer in a system with significant amounts of wind power. This is also supported by the case studies in the appended publications. / QC 20100804

Until today the offshore wind power has grown in a steady pace and many new wind farms are being constructed around the globe. An important factor that is investigated today in the industry are the security of power supply to the equipment needed for controlling the offshore system during emergency situations. When a offshore wind farm is disconnected from the external grid and an emergency case occur the wind turbine generators lose their ability to transfer power and they are forced to be taken out of operation. As there are a number of loads in the wind turbines (navigation lights, sensor- and communication-apparatus, ventilation- and heating equipment etc.) they have a load demand which must be supplied in emergency mode. The German Transmission System operator (TSO) TenneT GmbH has set a requirement that the wind turbines is to be supplied by an auxiliary power supply (APS) in 12 hours and therefore there is need for a long-term auxiliary power supply system. This master thesis was assigned to investigate the most feasible APS-system. From the study of a number of different APS's one concept was chosen. This was the diesel gen-set solution placed on an offshore substation at sea. The system was modeled in the software DIgSILENT PowerFactory where a load flow analysis validated the calculated data and a study of the impact of  transients in the system was performed.

The development and utilization of wind energy for satisfying electrical demand has received considerable attention in recent years due to its tremendous environmental, social and economic benefits, together with public support and government incentives. Electric power generation from wind energy behaves quite differently from that of conventional sources. The fundamentally different operating characteristics of wind energy facilities therefore affect power system reliability in a different manner than those of conventional systems. The reliability impact of such a highly variable energy source is an important aspect that must be assessed when the wind power penetration is significant. The focus of the research described in this thesis is on the utilization of state sampling Monte Carlo simulation in wind integrated bulk electric system reliability analysis and the application of these concepts in system planning and decision making. Load forecast uncertainty is an important factor in long range planning and system development. This thesis describes two approximate approaches developed to reduce the number of steps in a load duration curve which includes load forecast uncertainty, and to provide reasonably accurate generating and bulk system reliability index predictions. The developed approaches are illustrated by application to two composite test systems.<p> A method of generating correlated random numbers with uniform distributions and a specified correlation coefficient in the state sampling method is proposed and used to conduct adequacy assessment in generating systems and in bulk electric systems containing correlated wind farms in this thesis. The studies described show that it is possible to use the state sampling Monte Carlo simulation technique to quantitatively assess the reliability implications associated with adding wind power to a composite generation and transmission system including the effects of multiple correlated wind sites. This is an important development as it permits correlated wind farms to be incorporated in large practical system studies without requiring excessive increases in computer solution time. The procedures described in this thesis for creating monthly and seasonal wind farm models should prove useful in situations where time period models are required to incorporate scheduled maintenance of generation and transmission facilities.<p> There is growing interest in combining deterministic considerations with probabilistic assessment in order to evaluate the quantitative system risk and conduct bulk power system planning. A relatively new approach that incorporates deterministic and probabilistic considerations in a single risk assessment framework has been designated as the joint deterministic-probabilistic approach. The research work described in this thesis illustrates that the joint deterministic-probabilistic approach can be effectively used to integrate wind power in bulk electric system planning. The studies described in this thesis show that the application of the joint deterministic-probabilistic method provides more stringent results for a system with wind power than the traditional deterministic N-1 method because the joint deterministic-probabilistic technique is driven by the deterministic N-1 criterion with an added probabilistic perspective which recognizes the power output characteristics of a wind turbine generator.

Renewable energy policies, such as the Renewable Portfolio Standard, arising from increasing environmental concerns have set very ambitious targets for wind power penetration in electric power systems throughout the world. In many cases, the geographical locations with good wind resources are not close to the main load centers. It becomes extremely important to assess adequate transmission facility to deliver wind power to the power grid. <p>Wind is a highly variable energy source, and therefore, transmission system planning for wind delivery is very different from conventional transmission planning. Most electric power utilities use a deterministic n-1 criterion in transmission system planning. Deterministic methods cannot recognize the random nature of wind variation that dictates the power generated from wind power sources. This thesis presents probabilistic method to evaluate the contribution of a wind power delivery system to the overall system reliability. The effects of site-specific wind regime, system load, transmission line unavailability, and redundancy on system reliability were studied using a basic system model. The developed method responds to the various system parameters and is capable of assessing the actual system risks. <p>Modern power system aims to provide reliable as well as cost effective power supply to its consumers. Reliability benefits, environmental benefits and operating cost savings from wind power integration should be compared with the associated investment costs in order to determine optimum transmission facility for wind power delivery. This thesis presents the reliability/cost techniques for determining appropriate transmission line capacity to connect a wind farm to a power grid. The effect of transmission system cost, line length, wind regime, wind penetration and customer interruption cost on the optimum transmission line sizing were studied using a basic system model. The methodology and results presented in this thesis should be useful in transmission system planning for delivering wind power to a power system.

The wind energy conversion system considered in this thesis is based on a vertical axis wind turbine with a cable wound direct drive PM generator. Diode rectifiers are used to connect several such units to a single DC-bus and a single inverter controls the power flow from the DC-bus to a utility grid. This work considers the described system from a generator perspective i.e. the turbine is primarily seen as a torque and the inverter is seen as a controlled load. A 12 kW VAWT prototype with a single turbine has been constructed within the project. The power coefficient of this turbine has been measured when the turbine is operated at various tip speed ratios. This measurement determines both how much energy the turbine can convert in a given wind and at what speed the turbine should be operated in order to maximise the energy capture. The turbine torque variation during the revolution of the turbine has also been studied. A PM generator prototype has been constructed in order to study power loss in the stator core at low electrical frequencies. Heat exchange between the stator and the air-gap between the stator and the rotor has been studied. Heat exchange between the stator and the air-gap is increased by turbulence caused by the rotor. The generator was also used in a demonstration of a DC-grid where two diode rectified PM generators supplied power to a single DC load.  An initial study of an inverter suitable for grid connection of the 12 kW PM generator has been performed. Several turbine control strategies are evaluated in simulations. The control strategies only require the parameter "turbine speed" to determine the optimal system load.

During the last years commercial Wind Power Turbines (WPT) has become larger regardingto the generator sizes and hub heights. Available hub heights around 100 meters is nowcommon, which has led to profitability for WPT located in forests where there normally are tolow wind speeds. The current knowledgement regarding turbulence and the variation in thewind profile for the outcome of the power production for the WPT in forests is limited.In this Master of Science thesis an investigation concerning forest located wind power plantshas been made. The purpose has been to investigate if plants located in forest perform lesscompared to wind power turbines located at more common locations.The analyses are based on statically material for determining the availability,production/generator size, production/hub height, production/swept area and how thetopography affect the production results.The analyses show that the variation in production result for WPT located in forest comparedto turbines located at other locations is small. The availability is high and the productionresults are good.

Renewable distributed generation such as wind power and photovoltaics are gaining popularity all over the world. The overall aim of this Master thesis was to gather experience and knowledge regarding small wind power and photovoltaic with both a market based evaluation and technical description. Methods used have been literature review, interviews with market participants, evaluation of a wind mill and a photovoltaic system simulation with PVsyst 5.41. It was found that the main common incentive today for the development and spread of small wind power and photovoltaics for market participants is the symbolic value. It was also discovered that the market situation is complicated for the producing consumer. The spread of small wind power and PV today are a few per mille of a future potential, where politics largely control development and spread of small-scale solutions. The market is unclear and solutions around net charge is still an ongoing debate. Majority of the interviewed persons believes more in PV than in small wind power due to facts such as wind power is size-dependent and not optimal to build in urban areas. Results show that power quality issues are dependent on the network system as a whole and are often a matter of cost and can be prevented with different technical solutions. One conclusion was that bidirectional power flow increase complexity of problems around protection. Major energy companies are involved in projects to gather knowledge how to deal with DG both in technical aspects and how to deal with customers practically.

The interest in further expansion of wind power has increased significantly during the last decades, as it is an environmentally and financially competitive energy source. Wind power is an important part of achieving energy goals and climate commitments in several countries, not least in Sweden. The localisation of the wind turbines has, however, appeared to be controversial and local resistance occurs more frequently as the energy source expands. This creates a complex environmental conflict where various actors struggle to obtain differing goal settings. Such a situation occurred in Ödeshög municipality, when wind power entrepreneurs expressed their interests in establish wind turbines in forest and transition areas of the municipality. This thesis aims to emphasise how wind power expansion became such a controversial environmental conflict in Ödeshög. To be able to do this, the conflict is analysed from an Actor-Network Theory perspective. This theoretical framework has been used with the ambition to describe how the involved actors strategically have acted to possibly influence the outcome of the conflict. The situation in Ödeshög have much to say about how these conflicts occur and by learning from this situation several similar conflicts may be avoided.