Spelling suggestions: "subject:"woodpulp industry"" "subject:"woodpulps industry""
11 |
Structural characteristics of the northern Wisconsin pulpwood marketHamilton, Thomas E. January 1962 (has links)
Thesis (M.S.)--University of Wisconsin--Madison, 1962. / Typescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 82-83).
|
12 |
Molecular weight distributions of total organic halide in an aerated stabilization basin treating paper and pulp wastewaterAlleman, Bruce Charles, January 1986 (has links) (PDF)
Thesis (M.S. - Civil Engineering and Engineering Mechanics)--University of Arizona, 1986. / Includes bibliographical references (leaves 81-82).
|
13 |
Two-stage high-yield sulfite pulping of red alder (Alnus rubra Bong.) /Hansen, Edward Dee. January 1967 (has links)
Thesis (M.S.)--Oregon State University, 1967. / Typescript (photocopy). Includes bibliographical references (p. 52-60). Also available on the World Wide Web.
|
14 |
A survey of the pulp and paper industry in the state of Oregon in relation to land use /Spaur, George. January 1937 (has links)
Thesis (M.S.)--Oregon State College, 1937. / Typescript. Includes bibliographical references (leaves 126-129). Also available on the World Wide Web.
|
15 |
A model of the pulp sectorGilless, James Keith. January 1983 (has links)
Thesis (Ph. D.)--University of Wisconsin, 1983. / Typescript. Vita. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 113-119).
|
16 |
The economic outlook for the woodpulp industry in British ColumbiaWood, William Fordham Johnson January 1966 (has links)
The Honourable Mr. Ralph Loffmark, British Columbia's Minister of Trade and Commerce, has taken the position that demand for woodpulp will greatly exceed the supply during the next five years. On the other hand, leaders of British Columbia's pulp and paper industry fear that a large surplus of pulp is inevitable. In this thesis, the difference of opinion was examined by forecasting demand for paper and paperboard for the period of 1965 to 1975. From this estimate was derived the expected requirements for chemical pulp and bleached sulphate market pulp for the same period. The demand for bleached sulphate was then compared with the potential supply, leading to the judgement that a surplus condition will exist. Finally, the principal factors which would affect the financial outcome for an independent bleached sulphate pulp mill were analyzed. The conclusion was reached that an independent firm would be profitable in spite of the anticipated surplus. / Business, Sauder School of / Graduate
|
17 |
Detoxification of bleached kraft mill effluents by foam separationNg, Kong Seng January 1977 (has links)
Foam separation has been successfully developed on a 4-1 laboratory column, an 80-1 field column installation and a 6000 gal pilot plant trough type system as a novel process for detoxifying bleached kraft mill effluents.
Toxic surface active materials such as resin and unsaturated fatty acids collect at the gas-liquid interface of rising air bubbles and concentrate
in the foam. The highly toxic collapsed foam represents 1-2% by volume of the influent and is subsequently detoxified by biological treatment. Process parameters controlling detoxification efficiency are pH, gas-liquid interfacial area, initial toxicity level and mode of operation. The gas-liquid interfacial area and pH are of utmost importance.
For a typical effluent with MST of 3-4 hr, approximately 20-2
30 m²/l of interfacial area given to an effluent at pH > 7.0 are required for detoxification.
Foam separation is universally applicable and reliable for detoxifying
kraft whole mill effluent. Over 80% of 205 samples from 10 Canadian mills were detoxified. A 1 gal/min, one and two stage continuous
flow systems detoxified over 90% of samples at pH 8 and 1-2 hr retention time over 80 days of operation period.
Study of detoxification mechanism indicated that foam fractionation accounts for 77.5% of detoxification, volatization for 5.4% and unidentified
mechanisms for 17.1%. Depending on the mode of operation, up to 5% of effluent volume was discharged as foam. The foam volume could be reduced to < 2% by increasing foam retention time and enhancing internal
reflux. Collapsed foam was readily detoxified by a biodisc or aerated lagoon process.
In addition to detoxification, foam separation removed 20-60% of suspended solids, 66% resin acids, 12% B0D5 (10% TOC), 8% color and 80% foaming tendency. Suspended solids removal could be increased to 88% if an expensive dissolved air system were used for bubble generation.
Commercially available equipment for foam generation and foam breaking was reviewed. Jet aerators and turbine systems were assessed as most suitable for commercial application. Pilot plant evaluation of this equipment indicated that reliable and consistent operation could be obtained. The results were used to establish empirical formulae for use in process scale up.
During a 4 month continuous flow study, approximately 5-7 m²/l of gas-liquid interfacial area was provided to detoxify 80-100 gal/min of mill A effluent with MST of 6-10 hr. The detoxification success rate of a large number of samples increased from 50 to 86 and to 100% as the operation changed from 1 to 2 to 3 stages. The foam produced by the pilot plant was collapsed by a 12" diameter turbine at 100% efficiency all the time.
Costs of foam separation were examined for a projected 3 stage foam separation process, treating 25 M gal/day of bleached kraft whole mill effluent. Capital costs for pH control, foam generation, foam breaking and foam treatment were estimated at $2.26 M. Operating costs were estimated at $2.35/ton of pulp. / Applied Science, Faculty of / Chemical and Biological Engineering, Department of / Graduate
|
18 |
Fate and effects of pulp mill effluent solids in the soil environmentFraser, Donald Scott. January 2007 (has links)
Thesis (Ph.D. Earth and Ocean Sciences)--University of Waikato, 2007. / Title from PDF cover (viewed February 26, 2008) Includes bibliographical references (p. 148-164)
|
19 |
Monitoring dioxin levels in Maine rivers with semipermeable membrane devices /Shoven, Heather A., January 2001 (has links)
Thesis (M.S.) in Ecology and Environmental Sciences--University of Maine, 2001. / Includes vita. Includes bibliographical references (leaves 153-157).
|
20 |
The effects of kraft pulp mill wastes on the Amphipod, Hyalella azteca (Saussure)Everett, Lorne G. January 1969 (has links)
No description available.
|
Page generated in 0.0322 seconds