Spelling suggestions: "subject:"woodpulp industry."" "subject:"woodpulps industry.""
71 |
Water usage in the South African pulp and paper industry.Macdonald, C. J. M. January 2004 (has links)
The pulp and paper industry holds a reputation in the public eye for being a large consumer of water. This dissertation analyses water usage within the industry with a particular application to the South African pulp and paper industry.
Unlike in other paper-producing countries, water in South Africa is a scarce commodity with a wide range of consumers. Faced with this, it is important for the leaders of the paper industry to have a tool with which to manage water consumption.
This dissertation analyses the water usage aspects (including volumes needed and water quality needed) of the different processes, as well as the impact of different products, describing the reasons for water usage in each process. The application of best available technologies for water
reduction is discussed.
A theoretical or expected range and norm for water usage for each of seventeen South African mills is derived, based on each mill's particular processes, capacities and products. The actual water usage by each mill was surveyed by personally interviewing personnel at each mill. Comparisons are made between expected and actual water usage, and the total daily water consumption of the industry is derived.
Only two mills operate below the expected norm level, most smaller mills operate close to the norm level, while five of the larger mills need to apply various techniques to reduce their water usage.
The approximation of mill water usage to the predicted or expected norm clearly supports the hypothesis that water usage can be predicted by analysing process and capacity, and indicates that this dissertation can be used as a tool to manage water usage within the industry. / Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2004.
|
72 |
Water usage in the South African pulp and paper industry.Macdonald, C. J. M. January 2004 (has links)
The pulp and paper industry holds a reputation in the public eye for being a large consumer of water. This dissertation analyses water usage within the industry with a particular application to the South African pulp and paper industry.
Unlike in other paper-producing countries, water in South Africa is a scarce commodity with a wide range of consumers. Faced with this, it is important for the leaders of the paper industry to have a tool with which to manage water consumption.
This dissertation analyses the water usage aspects (including volumes needed and water quality needed) of the different processes, as well as the impact of different products, describing the reasons for water usage in each process. The application of best available technologies for water
reduction is discussed.
A theoretical or expected range and norm for water usage for each of seventeen South African mills is derived, based on each mill's particular processes, capacities and products. The actual water usage by each mill was surveyed by personally interviewing personnel at each mill. Comparisons are made between expected and actual water usage, and the total daily water consumption of the industry is derived.
Only two mills operate below the expected norm level, most smaller mills operate close to the norm level, while five of the larger mills need to apply various techniques to reduce their water usage.
The approximation of mill water usage to the predicted or expected norm clearly supports the hypothesis that water usage can be predicted by analysing process and capacity, and indicates that this dissertation can be used as a tool to manage water usage within the industry. / Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2004.
|
73 |
An analysis of Sappi Saiccor's effluent streams.Ismail, Fathima. January 2003 (has links)
SAPPI SAICCOR is a pulp and paper mill situated in Umkomaas, 50 kms south of the port of Durban in South Africa. It was the first company to produce high grade dissolving pulp from the Eucalyptus tree and is currently the world's largest manufacturer of chemical cellulose. SAICCOR is one of the few pulp and paper mills that produces its dissolving pulp by the acid sulphite process using both calcium and magnesium as bases in the form of calcium bisulphite and magnesium bisulphite. Four streams of effluent are produced during their process, namely, the calcium spent liquor, the magnesium pulp condensate and two streams from the bleaching stages. An acid hydrolysis of the effluent streams yielded a range of organic compounds such as lignans and lignin - type precursors as well as a triterpenoid. Column chromatography and thin layer chromatography, using various ratios of hexane, dichloromethane, ethyl acetate and methanol, were carried out in isolating and purifying the compounds. The structures of these compounds were determined using NMR spectroscopic and mass spectrometric techniques. / Thesis (M.Sc.)-University of Natal, Durban, 2003.
|
74 |
Water usage in the South African pulp and paper industry.Macdonald, C. J. M. January 2004 (has links)
The pulp and paper industry holds a reputation in the public eye for being a large consumer of water. This dissertation analyses water usage within the industry with a particular application to the South African pulp and paper industry.
Unlike in other paper-producing countries, water in South Africa is a scarce commodity with a wide range of consumers. Faced with this, it is important for the leaders of the paper industry to have a tool with which to manage water consumption.
This dissertation analyses the water usage aspects (including volumes needed and water quality needed) of the different processes, as well as the impact of different products, describing the reasons for water usage in each process. The application of best available technologies for water
reduction is discussed.
A theoretical or expected range and norm for water usage for each of seventeen South African mills is derived, based on each mill's particular processes, capacities and products. The actual water usage by each mill was surveyed by personally interviewing personnel at each mill. Comparisons are made between expected and actual water usage, and the total daily water consumption of the industry is derived.
Only two mills operate below the expected norm level, most smaller mills operate close to the norm level, while five of the larger mills need to apply various techniques to reduce their water usage.
The approximation of mill water usage to the predicted or expected norm clearly supports the hypothesis that water usage can be predicted by analysing process and capacity, and indicates that this dissertation can be used as a tool to manage water usage within the industry. / Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, Durban, 2004.
|
75 |
Characterisation of SAPPI SAICCOR pulp mill's effluent.Moodley, Brenda. January 2001 (has links)
SAPPI SAJCCOR, whose factory is situated south of Durban, South Africa, is one of the
few paper and pulp mills that uses the acid sulphite process with calcium and magnesium
bases to produce a high-grade cellulose pulp. Four streams of effluent, namely, the
calcium - spent liquor stream, the magnesium condensate stream and two streams from
the bleaching effluent are produced during this sulphite pulping process and they contain
a variety of organic compounds extracted from the wood. Characterisation of the effluent
was based on isolation using column chromatography and identification using NMR
techniques.
A range of constituents, such as lignans and lignin - type precursors, a trilerpenoid and
fatty acids were isolated and identified. X-ray diffraction was used to identify an
inorganic residue obtained from the calcium - spent liquor stream and gas
chromatography/mass spectrometry was used to identify a wax residue. which builds up
in the process. In addition to this, the carbohydrate content of the four streams of effluent
was detennined using UV/visiblc spectroscopy. / Thesis (M.Sc.)-University of Natal, Durban, 2001.
|
76 |
Evaluating the feasibility of converting crude tall oil and tall oil fatty acids into biofuelNgcobo, Nkosinathi Cedrick January 2011 (has links)
Submitted in the fulfillment of the requirements for the degree of Master of Technology, Durban University of Technology, Durban, South Africa, 2011. / The main objective of this study was to evaluate the feasibility of conversion of crude tall oil and tall oil fatty acids into biodiesel. During the Kraft pulping process, Crude Tall Oil originates as tall oil soap, which is separated from recovered black liquor. The soap is then converted to Crude Tall Oil by acidulation with sulphuric acid. The Crude Tall Oil is then fractionated by distillation to produce tall oil fatty acids (TOFA), rosin and pitch.
There were a number of conversional methods that were considered but proved to be inappropriate. A base-catalyzed method was inappropriate with due to the high free fatty acid content on the feedstock, and the acid-base catalyzed method was inappropriate due to the long reaction times and large excess of methanol required. An enzyme based conversion method was also found to be inappropriate because of the high price attached to the purchasing of the enzymes and the stability of the enzyme. A procedure of choice was the supercritical methanol treatment, due to the fact that it requires no separate catalyst.
A procedure was developed for both the feedstocks (i.e. crude tall oil and tall oil fatty acids) using the supercritical methanol treatment. In supercritical methanol treatment, feedstock and methanol were charged to a reactor and were subjected to temperatures and pressures beyond the critical point of methanol (Tc = 240 °C, Pc = 35 bar). The maximum biodiesel yield obtained from Crude tall oil was 66% and was 81% for the tall oil fatty acids that was produced in a single stage process. The temperature and methanol to feedstock ratio effects was also found to yield a maximum biodiesel yield at 325°C and 40:1 respectively. A 20 minutes reaction time was found to be appropriate for the maximum yield of biodiesel.
The final biodiesel produced was also evaluated against a commercial biodiesel product and its parameters measured. The biodiesel resulting from the tall oil fatty acid yielded parameters that were acceptable according to ASTM D6751 specifications for biodiesel. The biodiesel produced from the crude tall oil did not meet the ASTM D6751 specification, and this was mostly attributed to the presence of unsaponifiables which hindered the conversion of oil into biodiesel. / M
|
77 |
Potassium and chloride release during black liquor combustionReis, Victor Vinicius 29 July 1994 (has links)
Graduation date: 1995
|
78 |
SO��� capture and HCl release at Kraft recovery boiler conditionsBoonsongsup, Lerssak 03 September 1993 (has links)
Graduation date: 1994
|
79 |
Effects of ethanol media on chlorine dioxide and extraction stages for kraft pulp bleachingBrogdon, Brian N. 08 1900 (has links)
No description available.
|
80 |
In-situ biodegradation study using ³⁶Cl labeled bleaching filtrates / In-situ biodegradation study using 36Cl labeled bleaching filtratesWilliams, Chris L. 12 1900 (has links)
No description available.
|
Page generated in 0.0619 seconds