This investigation centers on early concrete technology used in Seguin, Texas, during the mid-19th century. Over the course of fifty years, more than ninety concrete structures were built in Seguin. Over the last century, these have dwindled to twenty extant structures. Much of the previous Seguin concrete era research has focused on the historical narrative and architectural description. This study aims to answer questions that previous research has not — it investigated the raw materials used in making Seguin’s concrete. The results provide new information about the Seguin concrete structures, providing guidance for their long-term maintenance. The materials analysis uses instrumental techniques such as scanning electron microscopy, energy dispersive x-ray spectroscopy, and x-ray diffraction to determine the chemical composition and crystalline structure of the cement binder from several extant structures in Seguin. Gathering both qualitative and quantitative data for the binder allowed us to identify the raw materials used in the concrete and better understand the construction methods. Studying the materials and methods increased our understanding of these historic structures and will inform future preservation efforts. / text

No description available.

No description available.

No description available.

No description available.

No description available.

This work presents an in-depth study of the crystal structures and hydrogen sorption potential of the Li - N - H and Li - Na - N - H systems. The structures of the materials have been studied using X-ray and neutron diffraction, Raman spectroscopy and inelastic neutron scattering. The behavior of the materials during heating was studied using variable temperature X-ray diffraction, intelligent gravimetric analysis in conjunction with neutron diffraction, intelligent gravimetric analysis combined with mass spectrometry and differential scanning calorimetry. The role of cation disorder in the Li - N - H (D) system has been explored, indicating that crystallographic ordering of the Li⁺ ions within lithium amide and lithium imide significantly affects the hydrogen sorption properties of the materials. Order-disorder transitions were observed both during hydrogen desorption from ordered LiNH₂ and during deuterium adsorption on ordered Li₂ND. Such transitions were not observed in disordered samples of the materials. The intrinsic disorder and the stoichiometry of Li - N - H(D) materials was shown to depend strongly on the techniques used during their synthesis. Studies regarding the synthesis, crystal chemistry and decomposition properties of the mixed Li / Na amides are presented. Two distinct mixed Li / Na amides of formulae Li₃Na(NH₂)₄ and LiNa₂(NH₂)₃ were observed in the LiNH₂ / NaNH₂ phase space. Na was also seen to be soluble in LiNH₂, forming sodium-doped LiNH₂ . Li₃Na(NH₂)₄ and Na-doped LiNH₂ were found to exhibit significant cation non-stoichiometry, whereas LiNa₂(NH₂)₄ was shown to exist as a line phase material. Thermogravimetric and calorimetric studies of the mixed Li / Na amides suggested that these materials decompose primarily with loss of H₂.

No description available.

The optimal conditions for deposition of zinc-nickel alloys onto stainless steel discs in alkaline solutions have been examined. In the past cadmium has been used because it shows good corrosion protection, but other methods are being examined due to the high toxicity and environmental threats posed by its use. Zinc has been found to provide good corrosion resistance, but the corrosion resistance is greatly increased when alloyed with nickel. The concentration of nickel in the deposit has long been a debated issue, but for basic solutions a nickel concentration of 8-15% appears optimal. However, deposition of zinc-nickel alloys from acidic solutions has average nickel concentrations of 12-15%. Alkaline conditions give a more uniform deposition layer, or better metal distribution, thereby a better corrosion resistance. Although TEA (triethanolamine) is most commonly used to complex the metals in solution, in this work I examined TEA along with other complexing agents. Although alkaline solutions have been examined, most research has been done in pH ≥ 12 solutions. However, there has been some work performed in the pH 9.3-9.5 range. This work examines different ligands in a pH 9.3-9.4 range. Direct potential plating and pulse potential plating methods are examined for optimal platings. The deposits were examined and characterized by XRD.

L’objectif de ma thèse consiste en l’étude de l’influence de l’orientation cristalline sur les microstructures de déformation et l’adoucissement (restauration, germination de la recristallisation) d’alliages Al-Mn.Les évolutions microstructurales de monocristaux d’orientation Laiton, Goss et S déformés en compression plane (0,15<ε<2,1) ont tout d’abord été caractérisées par la technique EBSD couplée à un MEB-FEG. Aux petites déformations, les microbandes s’alignent principalement sur les plans de cission maximale (indépendamment de l’orientation cristalline) ; alors qu’à des déformations plus importantes, elles s’alignent majoritairement sur les systèmes de glissement activés. Une structure lamellaire apparaît aux grandes déformations.Ensuite, les mécanismes de la restauration (à 240-320°C) dans ces mêmes monocristaux déformés (ε=2,1) ont été caractérisés par microdureté Vickers, par EBSD et par analyses des profils des pics de diffraction RX. La cinétique de restauration des monocristaux Laiton est systématiquement plus lente que celle des monocristaux Goss et S. L’influence de l’orientation serait alors attribuée aux faibles désorientations développées au cours de la déformation plastique pour les monocristaux Laiton (moyenne autour de 4°) comparativement à celles des monocristaux Goss et S (autour de 7-8°).Enfin, nous avons étudié l’adoucissement dans un polycristal déformé par une corrélation directe de la microstructure avant et après recuit. Deux principaux types de fragments Cube ont été mis en évidence dans l’état déformé. Seuls les fragments Cube « intergranulaires » permettent le développement rapide de grains Cube recristallisés. / The aim of my tesis was to evaluate the influence of crystalline orientation in deformation microstructures and softening (recovery, recrystallization) in cold-rolled Al-Mn alloys.The deformation microstructures of Al–Mn single crystals (namely Brass, Goss and S) have been characterized after channel-die compression up to true strains of 2.1 by EBSD in a FEG-SEM. There is a general tendency for the microbands to be non-crystallographic at low strains, then crystallographic, and finally mixed at high strains with some lamellar banding.The recovery behaviour (at 240-320°C) of the cold-rolled Al-0.1%Mn crystals (ε=2.1) was investigated by Vickers microhardness, EBSD and X-ray line broadening analysis. The microhardness recovery rates of the Brass oriented crystals are systematically lower than those of the Goss and S orientations. We thus suggest that the orientation dependency is ascribed to the relatively low misorientations developed by plastic straining in the Brass crystals (average about 4°) compared with the Goss and S orientations (about 7-8°).Finally, softening investigations in strongly deformed Al-0.1%Mn polycrystals were carried out to correlate the deformation microstructure with the cube recrystallization nucleation. Two major types of thin cube bands have been identified. Only the “intergranular” cube segments (usually between different S and Cu oriented grains) led to the formation of high growth rate recrystallized cube grains. The “transgranular” cube bands did not lead to a growth advantage for the cube components compared to components of the surrounding matrix.