<p>As communication becomes more and more vital in defending a country’s borders, better radios are needed. When the Swedish armed forces saw that their existing radios took too much bandwidth in their net, they knew that something had to be done.</p><p>The existing radio, called Ra 180 RAP, was modified so that it could send X.25 messages into a network. This significantly reduced the use of bandwidth, as a packet switched network only uses the bandwidth when sending info.</p><p>This final thesis has been aimed to create a system that can test the X.25 function in the upgraded, so called CI-RAP, radio. This system will come in handy both when upgrading and later when performing service on the radios.</p>

As communication becomes more and more vital in defending a country’s borders, better radios are needed. When the Swedish armed forces saw that their existing radios took too much bandwidth in their net, they knew that something had to be done. The existing radio, called Ra 180 RAP, was modified so that it could send X.25 messages into a network. This significantly reduced the use of bandwidth, as a packet switched network only uses the bandwidth when sending info. This final thesis has been aimed to create a system that can test the X.25 function in the upgraded, so called CI-RAP, radio. This system will come in handy both when upgrading and later when performing service on the radios.

A crescente complexidade das redes de comunicação de dados tem como conseqüência direta tornar cada vez mais complexas as tarefas de projetar seu dimensionamento e evolução. Um passo preliminar vitalmente importante no projeto de uma rede é a coleta de dados relacionados ao uso esperado da rede. Os padrões de tráfego estimados são usados nos cálculos de dimensionamento dos recursos. Fortemente relacionada a estas atividades está a previsão da performance em termos de throughput da rede, tempos de resposta, probabilidade de congestionamento, entre outras. Uma análise de performance efetiva depende de se representar precisamente a configuração da rede e da carga de tráfego a ela submetida. Técnicas de modelagem analítica ou de simulação podem ser usadas para determinar a performance esperada do sistema. Neste trabalho a usada a técnica de simulação para modelar o tráfego da rede usando dados coletados em uma rede real por monitoração. Trabalhando-se com o modelo validado e possível ajustar a carga de tráfego para representar mudanças esperadas nos volumes de tráfego, e testar o efeito na performance de diferentes configurações de rede. Isso possibilita que os processos de planejamento e projeto sejam executados com confiança, alem dos custos da rede poderem ser otimizados. O sistema apresentado neste trabalho e orientado à gerência de performance de redes, apoiando as atividades de gerência e planejamento de capacidade. Defende-se a idéia de que, a partir do perfil dos usuários de uma rede, derivado do tráfego por eles gerado, pode-se construir um modelo de tráfego significativamente representativo para a análise e previsão do desempenho da rede. O modelo foi desenvolvido para redes de comutação de pacotes com serviço orientado a conexão, e validado sobre o tráfego de uma rede X.25 através de um modelo de simulação, implementado em GPSS. O protótipo do sistema é composto por três processos principais que incorporam as etapas da análise de performance: monitoração do tráfego, análise do tráfego e simulação do tráfego. Na monitoração, são contabilizadas uma série de variáveis para cada conexão gerada na rede. Para cada tipo de aplicação são calculados os respectivos fatores de carga de tráfego. As aplicações são classificadas em dois grandes grupos: interativas e não-interativas. O processo de análise do tráfego gera os fatores de carga de tráfego na forma de tabelas e gráficos. As conexões e as métricas de performance produzidas na simulação do tráfego podem ser analisadas e validadas graficamente. O sistema proposto foi especificado em SDL (Specification and Description Language). / The increasing complexity of communication networks turns each time more complex the task to plan its expansion and evolution. A vitally important preliminar step in computer network design is the gathering of data relating to the expected use of the network. The estimated traffic patterns are used in resource usage computations. Closely related to these activities is the estimation of performance in terms of network throughput, response times, congestion probability, among others. An efective performance analysis requires the accurate representation of computer network configuration and traffic load. Analytical or simulation techniques can be used to establish the expected system performance. This work makes use of simulation to model the network traffic, based on collected data of a real network. network. Working with the validated model is possible to adjust the traffic load to represent future demand, and to test the performance impact under distinct network configurations. This enable a trustful execution of network planning and design, besides of the cost optimization. The system presented at this work is network performance management oriented, giving support to capacity management and capacity planning. The central idea is that, through network users profile achieved from generated traffic, it's possible to build a representative traffic model to aim at the network performance analysis and forecast. The model was developed to connection oriented packet switched networks, and validated by means of a simulation model to X.25 network traffic, implementd in GPSS. The system prototype comprises three process: traffic monitoring, traffic analysis and traffic simulation. In monitoring, a set of variables are registered for each network connection generated. The traffic load factors are computed according the application type. The applications are classified in two groups: interactive and non-interactive. The traffic analysis process produces traffic load factors in form of tables and graphics. Connections and performance metrics generated at traffic simulation can be graphically analyzed and validated. The proposed system was specified in SDL (Specification and Description Language).

A crescente complexidade das redes de comunicação de dados tem como conseqüência direta tornar cada vez mais complexas as tarefas de projetar seu dimensionamento e evolução. Um passo preliminar vitalmente importante no projeto de uma rede é a coleta de dados relacionados ao uso esperado da rede. Os padrões de tráfego estimados são usados nos cálculos de dimensionamento dos recursos. Fortemente relacionada a estas atividades está a previsão da performance em termos de throughput da rede, tempos de resposta, probabilidade de congestionamento, entre outras. Uma análise de performance efetiva depende de se representar precisamente a configuração da rede e da carga de tráfego a ela submetida. Técnicas de modelagem analítica ou de simulação podem ser usadas para determinar a performance esperada do sistema. Neste trabalho a usada a técnica de simulação para modelar o tráfego da rede usando dados coletados em uma rede real por monitoração. Trabalhando-se com o modelo validado e possível ajustar a carga de tráfego para representar mudanças esperadas nos volumes de tráfego, e testar o efeito na performance de diferentes configurações de rede. Isso possibilita que os processos de planejamento e projeto sejam executados com confiança, alem dos custos da rede poderem ser otimizados. O sistema apresentado neste trabalho e orientado à gerência de performance de redes, apoiando as atividades de gerência e planejamento de capacidade. Defende-se a idéia de que, a partir do perfil dos usuários de uma rede, derivado do tráfego por eles gerado, pode-se construir um modelo de tráfego significativamente representativo para a análise e previsão do desempenho da rede. O modelo foi desenvolvido para redes de comutação de pacotes com serviço orientado a conexão, e validado sobre o tráfego de uma rede X.25 através de um modelo de simulação, implementado em GPSS. O protótipo do sistema é composto por três processos principais que incorporam as etapas da análise de performance: monitoração do tráfego, análise do tráfego e simulação do tráfego. Na monitoração, são contabilizadas uma série de variáveis para cada conexão gerada na rede. Para cada tipo de aplicação são calculados os respectivos fatores de carga de tráfego. As aplicações são classificadas em dois grandes grupos: interativas e não-interativas. O processo de análise do tráfego gera os fatores de carga de tráfego na forma de tabelas e gráficos. As conexões e as métricas de performance produzidas na simulação do tráfego podem ser analisadas e validadas graficamente. O sistema proposto foi especificado em SDL (Specification and Description Language). / The increasing complexity of communication networks turns each time more complex the task to plan its expansion and evolution. A vitally important preliminar step in computer network design is the gathering of data relating to the expected use of the network. The estimated traffic patterns are used in resource usage computations. Closely related to these activities is the estimation of performance in terms of network throughput, response times, congestion probability, among others. An efective performance analysis requires the accurate representation of computer network configuration and traffic load. Analytical or simulation techniques can be used to establish the expected system performance. This work makes use of simulation to model the network traffic, based on collected data of a real network. network. Working with the validated model is possible to adjust the traffic load to represent future demand, and to test the performance impact under distinct network configurations. This enable a trustful execution of network planning and design, besides of the cost optimization. The system presented at this work is network performance management oriented, giving support to capacity management and capacity planning. The central idea is that, through network users profile achieved from generated traffic, it's possible to build a representative traffic model to aim at the network performance analysis and forecast. The model was developed to connection oriented packet switched networks, and validated by means of a simulation model to X.25 network traffic, implementd in GPSS. The system prototype comprises three process: traffic monitoring, traffic analysis and traffic simulation. In monitoring, a set of variables are registered for each network connection generated. The traffic load factors are computed according the application type. The applications are classified in two groups: interactive and non-interactive. The traffic analysis process produces traffic load factors in form of tables and graphics. Connections and performance metrics generated at traffic simulation can be graphically analyzed and validated. The proposed system was specified in SDL (Specification and Description Language).

A crescente complexidade das redes de comunicação de dados tem como conseqüência direta tornar cada vez mais complexas as tarefas de projetar seu dimensionamento e evolução. Um passo preliminar vitalmente importante no projeto de uma rede é a coleta de dados relacionados ao uso esperado da rede. Os padrões de tráfego estimados são usados nos cálculos de dimensionamento dos recursos. Fortemente relacionada a estas atividades está a previsão da performance em termos de throughput da rede, tempos de resposta, probabilidade de congestionamento, entre outras. Uma análise de performance efetiva depende de se representar precisamente a configuração da rede e da carga de tráfego a ela submetida. Técnicas de modelagem analítica ou de simulação podem ser usadas para determinar a performance esperada do sistema. Neste trabalho a usada a técnica de simulação para modelar o tráfego da rede usando dados coletados em uma rede real por monitoração. Trabalhando-se com o modelo validado e possível ajustar a carga de tráfego para representar mudanças esperadas nos volumes de tráfego, e testar o efeito na performance de diferentes configurações de rede. Isso possibilita que os processos de planejamento e projeto sejam executados com confiança, alem dos custos da rede poderem ser otimizados. O sistema apresentado neste trabalho e orientado à gerência de performance de redes, apoiando as atividades de gerência e planejamento de capacidade. Defende-se a idéia de que, a partir do perfil dos usuários de uma rede, derivado do tráfego por eles gerado, pode-se construir um modelo de tráfego significativamente representativo para a análise e previsão do desempenho da rede. O modelo foi desenvolvido para redes de comutação de pacotes com serviço orientado a conexão, e validado sobre o tráfego de uma rede X.25 através de um modelo de simulação, implementado em GPSS. O protótipo do sistema é composto por três processos principais que incorporam as etapas da análise de performance: monitoração do tráfego, análise do tráfego e simulação do tráfego. Na monitoração, são contabilizadas uma série de variáveis para cada conexão gerada na rede. Para cada tipo de aplicação são calculados os respectivos fatores de carga de tráfego. As aplicações são classificadas em dois grandes grupos: interativas e não-interativas. O processo de análise do tráfego gera os fatores de carga de tráfego na forma de tabelas e gráficos. As conexões e as métricas de performance produzidas na simulação do tráfego podem ser analisadas e validadas graficamente. O sistema proposto foi especificado em SDL (Specification and Description Language). / The increasing complexity of communication networks turns each time more complex the task to plan its expansion and evolution. A vitally important preliminar step in computer network design is the gathering of data relating to the expected use of the network. The estimated traffic patterns are used in resource usage computations. Closely related to these activities is the estimation of performance in terms of network throughput, response times, congestion probability, among others. An efective performance analysis requires the accurate representation of computer network configuration and traffic load. Analytical or simulation techniques can be used to establish the expected system performance. This work makes use of simulation to model the network traffic, based on collected data of a real network. network. Working with the validated model is possible to adjust the traffic load to represent future demand, and to test the performance impact under distinct network configurations. This enable a trustful execution of network planning and design, besides of the cost optimization. The system presented at this work is network performance management oriented, giving support to capacity management and capacity planning. The central idea is that, through network users profile achieved from generated traffic, it's possible to build a representative traffic model to aim at the network performance analysis and forecast. The model was developed to connection oriented packet switched networks, and validated by means of a simulation model to X.25 network traffic, implementd in GPSS. The system prototype comprises three process: traffic monitoring, traffic analysis and traffic simulation. In monitoring, a set of variables are registered for each network connection generated. The traffic load factors are computed according the application type. The applications are classified in two groups: interactive and non-interactive. The traffic analysis process produces traffic load factors in form of tables and graphics. Connections and performance metrics generated at traffic simulation can be graphically analyzed and validated. The proposed system was specified in SDL (Specification and Description Language).

Le présent mémoire s’intéresse aux possibilités de sens que les textes évangéliques offrent au lecteur contemporain. En utilisant la méthode de Greimas, telle que reprise par Courtés et Delorme, le but de l’étude est principalement d’identifier les structures narratives et discursives de Luc 10, 25-3 7 afin de montrer comment ce texte, abordé comme un tout de signification, informe la lecture. L’analyse de ce dialogue mettra en lumière le fait que Jésus invite le légiste à transformer la façon qu’il a de concevoir la finalité du savoir dans sa propre vie. La description sémiotique nous permettra de constater que le changement de perspective qu’il est invité à réaliser se situe au niveau de son "vouloir": c’est pourquoi nous dirons qu’il est invité à réaliser une "conversion du vouloir".

We have chosen to look closer at the area of security for electronic invoices. The purpose of this inquest is to provide our case study with a security analysis of three suggestions and a recommendation of the best solution, according to our test. The three solutions are ISDN via a third party, X.25 via Internet bank and Mail server. The company in our case study is in this report referred to as X, has a strong market position and a large clientele and therefore we were interested in analysing and improving X?s electronic invoice system. X was in the position of testing an electronic invoicing system towards a selective group of business customers. The major problem with the system was the security issue regarding transferring the file.

Text in German / Taking the plurality of methods in Biblical studies as starting point this dissertation shows a way to coherent interpretation message. An analysis of the current state and its long history identifies characteristics preventing clear interpretation results as well as ways to work out coherent interpretation messages. It is accompanied by five interpretations of Luke 10:25-37. An interdisciplinary excursus examines the legal interpretation with its claim of clarity. Three levels of interpretation are considered as essential for an adequate process of interpretation: 1. Clarification of the literal meaning on the basis of a historical exegesis. The author calls for the interdisciplinary cooperation of the methods and introduces a synthesis of methods. 2. Consideration of the reception history of texts. Special attention is given to the authority of interpretation in the Roman Catholic Church. The author regards "interpretive communities" as an alternative option. 3. The Holy Spirit's influence on the process of interpretation. Also in post-modern times interpreters need to "inhabit" the biblical texts. / Biblical and Ancient studies / M.Th. (New Testament)

The purpose of the research is to propose and evaluate a methodology for implementing EDI to assist organisations in reaping the anticipated benefits. The research involved the systematic analysis of the state of the art of EDI and paradigms of methodologies, to define a model for the EDI implementation methodology, and to define criteria for evaluating such a model. The methodology was developed and modelled utilising the software process model, as adopted by Boehm (1988) and later duPlessis and van der Walt (1992), as a framework. Next a synthesis of the assimilated knowledge and brainstorming of project teams involved in EDI pilot projects, was used to systematically develop an EDI implementation methodology. The methodology was evaluated by utilising it in the implementation of EDI between two organisations, Computer Equipment Brokers (PTY) and Marksec (PTY). It was concluded that the methodology was efficient for implementing EDI. / Computing / M. Sc. (Information Systems)

Text in German / Taking the plurality of methods in Biblical studies as starting point this dissertation shows a way to coherent interpretation message. An analysis of the current state and its long history identifies characteristics preventing clear interpretation results as well as ways to work out coherent interpretation messages. It is accompanied by five interpretations of Luke 10:25-37. An interdisciplinary excursus examines the legal interpretation with its claim of clarity. Three levels of interpretation are considered as essential for an adequate process of interpretation: 1. Clarification of the literal meaning on the basis of a historical exegesis. The author calls for the interdisciplinary cooperation of the methods and introduces a synthesis of methods. 2. Consideration of the reception history of texts. Special attention is given to the authority of interpretation in the Roman Catholic Church. The author regards "interpretive communities" as an alternative option. 3. The Holy Spirit's influence on the process of interpretation. Also in post-modern times interpreters need to "inhabit" the biblical texts. / Biblical and Ancient studies / M.Th. (New Testament)