Thesis advisor: Laura Anne Lowery / Thesis advisor: David Burgess / While XMAP215 (CKAP5 / ch-TOG) has been best characterized for its microtubule polymerase function, recent studies have highlighted a novel role for XMAP215 in facilitating an interaction between microtubules and F-actin in the embryonic neuronal growth cone, a critical structure involved in neuronal outgrowth and guidance mechanisms. Microtubule and F-actin cytoskeletal cross talk and reorganization are important aspects of axonal guidance mechanisms, but how associated proteins facilitate this function largely remains a mystery. In addition, it has long been established that neuronal growth cone navigation depends on changes in microtubule (MT) and F-actin architecture downstream of guidance cues. However, the mechanisms by which MTs and F-actin are dually coordinated remain a fundamentally unresolved question. Here, I report that the well-characterized MT polymerase, XMAP215 (also known as ch-TOG / CKAP5), plays an important role in mediating MT–F-actin interactions within the growth cone. I demonstrate that XMAP215 regulates MT–F-actin alignment through its N-terminal TOG 1–5 domains. Additionally, I show that XMAP215 directly binds to F-actin in vitro and co-localizes with F-actin in the growth cone periphery. By working with lab colleagues, we also find that XMAP215 is required for regulation of growth cone morphology and response to the guidance cue, Ephrin A5. Our findings provide the first strong evidence that XMAP215 coordinates MT and F-actin interaction in vivo. It is here that I suggest a model in which XMAP215 regulates MT extension along F-actin bundles into the growth cone periphery and that these interactions may be important to control cytoskeletal dynamics downstream of guidance cues. Furthermore, I then go on to study this dual microtubule and F-actin role, diving deeper into the mechanism behind this novel ability of XMAP215. Here, I report that XMAP215 is capable of spatially localizing populations of microtubules into distinct domains in the growth cone through its less well-characterized microtubule-lattice binding activity. In addition, through the use of purified proteins and biochemical assays, I show that XMAP215 is capable of binding directly to F-actin, facilitated by its unique TOG5 domain. Finally, through biochemical means and super resolution imaging, I show that this novel function of XMAP215 is mediated by polymerase-incompetent mutants of XMAP215. Taken together, my findings show strong evidence of a non-microtubule-polymerase function of XMAP215, providing mechanistic insights into how microtubule populations can be guided by interaction with the F-actin cytoskeleton. In conclusion, I explore a novel and functionally important role for XMAP215 in facilitating interactions between microtubule and actin cytoskeletons, bridging the two structural components of the cell together. In this way, XMAP215 is now known as a distinct microtubule/F-actin regulator that governs microtubule exploration through the help of actin in neurons, in addition to its previously characterized function as a microtubule polymerase. While this thesis explores the very groundwork of XMAP215’s new novel function, there is still a great deal more to learn about the overall mechanism occurring, as well as an understanding of its role in various cell types. / Thesis (PhD) — Boston College, 2020. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Biology.

Microtubules are a part of the cell cytoskeleton that performs different functions, such as providing the mechanical support for the shape of a cell, acting as tracks along which the motor protein move organelles from one part of the cell to another, or the forming mitotic spindle during the cell division. The microtubules are dynamic structures, namely they can grow and shrink. The phase of microtubule growth alternates with the phase of shrinkage that results in the dynamic microtubule network in the cell. However, to form stable and spatially well-defined structures, such as a mitotic spindle, the cell needs to control this stochastic process. This is done by microtubule-associated proteins (MAPs). One class of MAPs is the proteins of XMAP216/Dis1 family, which are microtubule polymerases. The founding member of this family is X. laevis XMAP215. XMAP215 is a processive polymerase acting on the microtubule plus end. XMAP215 binds either directly or reaches the microtubule plus end by the diffusion along the microtubule lattice. Being at the microtubule plus-end XMAP215 stays there transiently and helps to incorporate up to 25 tubulin dimers into microtubule lattice before it dissociates and, therefore, it processively tracks the growing microtubule end during polymerization. There are two hypothesis of microtubule assembly promotion: (i) XMAP215 repeatedly releases an associated tubulin dimer into the microtubule growing plus end or (ii) structurally stabilizes a polymerized tubulin intermediate at the growing plus end and, therefore, preventing depolymerization events. The first way results into the increase of on-rate of tubulin dimers at the microtubule end, whereas the second way results into the decrease of off-rate of tubulin dimers at the microtubule end. Here, I show the study of the mechanism of microtubule growth acceleration by XMAP215 and the dependence of XMAP215 polymerization activity on the applied force. To answer these questions, I investigated the addition of tubulin dimers to the plus end of the microtubule by XMAP215 and how this addition depends on the applied force. XMAP215 remains at the microtubule end for several rounds of tubulin addition surfing both growing and shrinking microtubule ends. Therefore, if one could track the position of the XMAP215 molecules at the very tip of a microtubule with sufficient resolution, it would provide the information about the dynamics of the microtubule end. The technique, which can detect the position of the object of interest with high spatial and temporal resolution in addition to being able to exert a force, is an optical trap. A calibrated optical trap not only provides a good measure of displacement but also enables force measurements. To monitor the position of the molecules of interest, the molecules of interest are usually attached to a microsphere. Hence, I tethered XMAP215 to a microsphere held by an optical trap, and used XMAP215 as a handle to interact with the microtubule tip. When the microtubule grows, the XMAP215 coated microsphere will move in the optical trap and this movement can be detected with high temporal and spatial resolution. My work demonstrates that cooperatively working XMAP215 molecules can not only polymerize microtubule but also harness the energy of microtubule polymerization or depolymerization to transport some cargo. There is an evidence that orthologues of XMAP215 in budding yeasts, fission yeasts and Drosophila localize on the kinetochores. Therefore, the ability of the bearing some load during microtubule polymerization could be potentially important for the XMAP215 functioning during cell division. I also showed the influence of external force applied to the XMAP215 molecules. Pointing toward microtubule growth, a force of 0.5 pN applied to the microtubule tip-coupled XMAP215-coated microsphere increases XMAP215 polymerization activity. However, the force of the same magnitude but applied against microtubule growth does not affect XMAP215 polymerization activity. This result can be explained by the fact, that the force acting in the direction of microtubule growth constrains XMAP215 to be at the very microtubule tip. Hence, XMAP215 can not diffuse away from plus-end and there is higher chance to incorporate tubulin dimers into the microtubule plus-end. The on- and off-rate of tubulin dimers at the microtubule end are both decreased when the external force applied either in direction of microtubule growth or opposite to it. The external force affects the off-rate slightly stronger than on-rate of tubulin dimer. Taking together, my study gives new insights into the mechanism of microtubule polymerization by XMAP215 and shows some novel properties of this protein.

Microtubules are a part of the cell cytoskeleton that performs different functions, such as providing the mechanical support for the shape of a cell, acting as tracks along which the motor protein move organelles from one part of the cell to another, or the forming mitotic spindle during the cell division. The microtubules are dynamic structures, namely they can grow and shrink. The phase of microtubule growth alternates with the phase of shrinkage that results in the dynamic microtubule network in the cell. However, to form stable and spatially well-defined structures, such as a mitotic spindle, the cell needs to control this stochastic process. This is done by microtubule-associated proteins (MAPs). One class of MAPs is the proteins of XMAP216/Dis1 family, which are microtubule polymerases. The founding member of this family is X. laevis XMAP215. XMAP215 is a processive polymerase acting on the microtubule plus end. XMAP215 binds either directly or reaches the microtubule plus end by the diffusion along the microtubule lattice. Being at the microtubule plus-end XMAP215 stays there transiently and helps to incorporate up to 25 tubulin dimers into microtubule lattice before it dissociates and, therefore, it processively tracks the growing microtubule end during polymerization. There are two hypothesis of microtubule assembly promotion: (i) XMAP215 repeatedly releases an associated tubulin dimer into the microtubule growing plus end or (ii) structurally stabilizes a polymerized tubulin intermediate at the growing plus end and, therefore, preventing depolymerization events. The first way results into the increase of on-rate of tubulin dimers at the microtubule end, whereas the second way results into the decrease of off-rate of tubulin dimers at the microtubule end. Here, I show the study of the mechanism of microtubule growth acceleration by XMAP215 and the dependence of XMAP215 polymerization activity on the applied force. To answer these questions, I investigated the addition of tubulin dimers to the plus end of the microtubule by XMAP215 and how this addition depends on the applied force. XMAP215 remains at the microtubule end for several rounds of tubulin addition surfing both growing and shrinking microtubule ends. Therefore, if one could track the position of the XMAP215 molecules at the very tip of a microtubule with sufficient resolution, it would provide the information about the dynamics of the microtubule end. The technique, which can detect the position of the object of interest with high spatial and temporal resolution in addition to being able to exert a force, is an optical trap. A calibrated optical trap not only provides a good measure of displacement but also enables force measurements. To monitor the position of the molecules of interest, the molecules of interest are usually attached to a microsphere. Hence, I tethered XMAP215 to a microsphere held by an optical trap, and used XMAP215 as a handle to interact with the microtubule tip. When the microtubule grows, the XMAP215 coated microsphere will move in the optical trap and this movement can be detected with high temporal and spatial resolution. My work demonstrates that cooperatively working XMAP215 molecules can not only polymerize microtubule but also harness the energy of microtubule polymerization or depolymerization to transport some cargo. There is an evidence that orthologues of XMAP215 in budding yeasts, fission yeasts and Drosophila localize on the kinetochores. Therefore, the ability of the bearing some load during microtubule polymerization could be potentially important for the XMAP215 functioning during cell division. I also showed the influence of external force applied to the XMAP215 molecules. Pointing toward microtubule growth, a force of 0.5 pN applied to the microtubule tip-coupled XMAP215-coated microsphere increases XMAP215 polymerization activity. However, the force of the same magnitude but applied against microtubule growth does not affect XMAP215 polymerization activity. This result can be explained by the fact, that the force acting in the direction of microtubule growth constrains XMAP215 to be at the very microtubule tip. Hence, XMAP215 can not diffuse away from plus-end and there is higher chance to incorporate tubulin dimers into the microtubule plus-end. The on- and off-rate of tubulin dimers at the microtubule end are both decreased when the external force applied either in direction of microtubule growth or opposite to it. The external force affects the off-rate slightly stronger than on-rate of tubulin dimer. Taking together, my study gives new insights into the mechanism of microtubule polymerization by XMAP215 and shows some novel properties of this protein.