Zeolites are a well-known class of crystalline oxide materials with tunable compositions and nanoporous structures, and have been used extensively in catalysis, adsorption, and ion exchange. The zeolite MFI is one of the well-studied zeolites because it has a pore size and structure suitable for separation or chemical conversion of many industrially important molecules. Modification of zeolite structures with organic groups offers a potential new way to change their properties of zeolites, beyond the manipulation of the zeolite framework structure and composition. The main goals of this thesis research are to study the organic-modification of the MFI pore structure, and to assess the effects of such modification on the adsorption and transport properties of zeolite MFI sorbents and membranes. In this work, the internal pore structure of MFI zeolite particles and membranes has been modified by direct covalent condensation or chemical complexation of different organic molecules with the silanol defect sites existing in the MFI structure. The organic molecules used for pore modification are 1-butanol, 1-hexanol, 3-amino-1-propanol, 1-propaneamine, 1,3-diaminopropane, 2-[(2-aminoethyl)amino]ethanol, and benzenemethanol. TGA/DSC and 13C/29Si NMR characterizations indicated that the functional groups were chemically bound to the zeolite framework, and that the loading was commensurate with the concentration of internal silanol defects. Gas adsorption isotherms of CO2, CH4, and N2 on the modified zeolite materials show a range of properties different from that of the bare MFI zeolite. The MFI/3-amino-1-propanol, MFI/2-[(2-aminoethyl)amino]ethanol, and MFI/benzenemethanol materials showed the largest differences from bare MFI. These properties were qualitatively explained by the known affinity of amino- and hydroxyl groups for CO2, and of the phenyl group for CH4. The combined influence of adsorption and diffusion changes due to modification can be studied by measuring permeation of different gases on modified MFI membranes. To study these effects, I synthesized MFI membranes with [h0h] out-of-plane orientation on α-alumina supports. The membranes were modified by the same procedures as used for MFI particles and with 1-butanol, 3-amino-1-propanol, 2-[(2-aminoethyl)amino]ethanol, and benzenemethanol. The existence of functional groups in the pores of the zeolite was confirmed by PA-FTIR measurements. Permeation measurements of H2, N2, CO2, CH4, and SF6, were performed at room temperature before and after modification. Permeation of n-butane, and i-butane were measured before and after modification with 1-butanol. For all of the studied gases, gas permeances decreased by 1-2 orders of magnitude compared to bare MFI membranes for modified membranes. This is a strong indication that the organic species in the MFI framework are interacting with or blocking the gas molecule transport through the MFI pores. A detailed fundamental study of the CO2 adsorption mechanism in modified zeolites is necessary to gain a better understating of the adsorption and permeation behavior of such materials. Towards this end, an in situ FTIR study was performe.For the organic molecules with only one functional group (1-butanol, benzenemethanol, and 1-propaneamine), physical adsorption was found - as intuitively expected - to be the only observed mode of attachment of CO2 to the modified zeolite material. Even in the case of MFI modified with 1,3-diaminopropane, only physical adsorption is seen. This is explained by the isolated nature of the amine groups in the material, due to which only a single amine group can interact with a CO2 molecule. On the other hand, chemisorbed CO2 species are clearly observed on bare MFI, and on MFI modified with 3-amino-1-propanol or 2-[(2-aminoethyl)amino]ethanol. Specifically, these are carbonate-like species that arise from the chemisorption of CO2 to the silanol group in bare MFI and the alcohol groups of the modifying molecule. The possibility of significant contributions from external surface silanol groups in adsorbing CO2 chemisorbed species was ruled out by a comparative examination of the FTIR spectra of 10 μm and 900 nm MFI particles modified with 2-[(2-aminoethyl)amino]ethanol.

Made available in DSpace on 2014-12-17T15:42:28Z (GMT). No. of bitstreams: 1 MariaJFC_TESE.pdf: 4007652 bytes, checksum: 7bb363c54641679d79bbff5c76de539f (MD5) Previous issue date: 2013-06-03 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / The processing of heavy oil produced in Brazil is an emergency action and a strategic plan to obtain self-sufficiency and economic surpluses. Seen in these terms, it is indispensable to invest in research to obtain new catalysts for obtaining light fraction of hydrocarbons from heavy fractions of petroleum. This dissertation for the degree of Doctor of Philosophy reports the materials preparation that combine the high catalytic activity of zeolites with the greater accessibility of the mesoporosity, more particularly the HZSM-5/MCM-41 hybrid, done by synthesis processes with less environmental impact than conventional ones. Innovative methodologies were developed for the synthesis of micro-mesoporous hybrid material by dual templating mechanism and from crystalline zeolitic aluminosilicate in the absence of organic template. The synthesis of hybrid with pore bimodal distribution took place from one-single organic directing agent aimed to eliminate the use of organic templates, acids of any kind or organic solvents like templating agent of crystalline zeolitic aluminosilicate together with temperature-programmed microwave-assisted, making the experimental procedures of preparation most practical and easy, with good reproducibility and low cost. The study about crystalline zeolitic aluminosilicate in the absence of organic template, especially MFI type, is based on use of H2O and Na+ cation playing a structural directing role in place of an organic template. Advanced characterization techniques such as X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Highresolution Transmission Electron Microscopy (HRTEM), Adsorption of N2 and CO2, kinetic studies by Thermogravimetric Analysis (TGA) and Pyrolysis coupled to Gas Chromatography/Mass Spectrometry (Pyrolysis-GC/MS) were employed in order to evaluate the synthesized materials. Achieve the proposed objectives, has made available a set of new methodologies for the synthesis of zeolite and hybrid micro-mesoporous material, these suitable for catalytic pyrolysis of heavy oils aimed at producing light fraction / O processamento do petr?leo pesado produzido no Pa?s ? uma a??o emergencial e estrat?gica para obter a auto-sufici?ncia e super?vits econ?micos. Neste sentido, ? indispens?vel o investimento em pesquisas de novos catalisadores para obten??o de derivados leves a partir de fra??es pesadas do petr?leo. O trabalho de doutorado aqui reportado dedicouse ? prepara??o de materiais que combinem, numa ?nica estrutura, a elevada atividade catal?tica de ze?litas, com melhor acessibilidade de materiais mesoporosos, como a estrutura h?brida HZSM-5/MCM-41, utilizando processos de s?ntese com menor impacto ambiental que os convencionais. Metodologias inovadoras foram desenvolvidas para a s?ntese do catalisador h?brido micro-mesoporoso ou ze?lito-mesoporoso por mecanismo de direcionamento estrutural via duplo agente diretor org?nico e tamb?m a partir de estrutura zeol?tica sintetizada na aus?ncia total de direcionador org?nico. Esse ?ltimo, tamb?m chamado de s?ntese do h?brido com distribui??o bimodal de poros a partir de um ?nico agente diretor org?nico, visou eliminar o uso dos direcionadores org?nicos, ?cidos de qualquer natureza ou solventes org?nicos como molde estrutural da estrutura zeol?tica em conjunto com o m?todo hidrot?rmico assistido por irradia??o via micro-ondas, tornando o procedimento experimental de prepara??o pr?tico e simples, com boa reprodutibilidade e menor custo. A metodologia de prepara??o da ze?lita MFI do tipo ZSM-5 utiliza H2O e c?tions Na+ no papel de direcionamento estrutural e compensa??o de cargas na estrutura. T?cnicas relevantes de caracteriza??o, como Difra??o de Raios-X (XRD), Espectroscopia no Infravermelho com Transformada de Fourier (FTIR), Microscopia Eletr?nica de Varredura (SEM), Microscopia Eletr?nica de Transmiss?o de Alta Resolu??o (HRTEM), Adsor??o de N2 e CO2, estudos cin?ticos via An?lises Termogravim?tricas (TGA) e Pir?lise acoplada ? Cromatografia Gasosa/Espectrometria de Massas (Pyrolysis-GC/MS), foram empregadas no intuito de avaliar os materiais sintetizados. Alcan?ados os objetivos propostos, disponibilizou-se um conjunto de novas metodologias para s?ntese de catalisadores zeol?ticos e h?bridos micromesoporosos, estes adequados para pir?lise catal?tica de ?leos pesados visando ? produ??o de derivados leves

Made available in DSpace on 2014-12-17T15:41:45Z (GMT). No. of bitstreams: 1 MariaJFCpdf.pdf: 4931245 bytes, checksum: 45a7ea893d17f478c73adf56787579aa (MD5) Previous issue date: 2008-12-22 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / The present work reports the study of nanoporous structures, aiming at their use in research directed to the current demand of the petroleum industry to value heavy oil. Initially, two ways were chosen for the synthesis of porous structures from the molecular sieves of type Si-MCM-41. In the first way, the structure MCM-41 is precursory for heteroatom substitutes of silicon, generating catalyst of the type Al-MCM-41 from two different methods of incorporation of the metal. This variation of the incorporation method of Aluminum in the structure of Si-MCM-41 was carried out through the conventional procedure, where the aluminum source was incorporated to the gel of synthesis, and the procedure post-synthesis, where the Aluminum source was incorporated in catalyst after the synthesis of Si-MCM-41. In the second way, the MCM-41 acts as a support for growth of nanocrystals of zeolite embedded in their mesoporous, resulting in hybrid MCM-41/ZSM-5 catalyst. A comparative analysis was carried through characterizations by XRD, FTIR, measures of acidity through n-butylamine adsorption for TGA, SEM-XRF and N2 adsorption. Also crystalline aluminosilicate with zeolitic structure MFI of type ZSM-5 was synthesized without using organic templates. Methodologies to the preparation of these materials are related by literature using conventionally reactants that supply oxides of necessary silicon and aluminum, as well as a template agent, and in some cases co-template. The search for new routes of preparation for the ZSM-5 aimed at, above all, the optimization of the same as for the time and the temperature of synthesis, and mainly the elimination of the use of organic templates, that are material of high cost and generally very toxic. The current study is based on the use of the H2O and Na+ cations playing the role of structural template and charge compensation in the structure. Characterizations by XRD, FTIR, SEM-XRF and N2 adsorption were also conducted for this material in order to compare the samples of ZSM-5 synthesized in the absence of template and those used industrially and synthesized using structuring / O presente trabalho relata o estudo de estruturas nanoporosas, visando o uso em pesquisas que atendam a atual demanda da ind?stria do petr?leo, de valorizar ?leos pesados. Inicialmente, optou-se por duas vertentes para a s?ntese de estruturas porosas a partir da peneira molecular do tipo Si-MCM-41. Na primeira vertente, a estrutura MCM-41 ? precursora para hetero?tomos substituintes do sil?cio, gerando catalisadores do tipo Al-MCM-41 a partir de dois diferentes m?todos de incorpora??o do metal. Essa varia??o do m?todo de incorpora??o do Alum?nio na estrutura do Si-MCM-41 se deu atrav?s do procedimento convencional, no qual a fonte de alum?nio foi incorporada ao gel de s?ntese e do procedimento p?s-s?ntese, no qual a fonte de Alum?nio foi incorporada ao catalisador ap?s a s?ntese do Si-MCM-41. Na segunda vertente, o MCM-41 age como suporte para o crescimento de nanocristais de ze?lita embutidos nos seus mesoporos, resultando no catalisador h?brido MCM-41/ZSM-5. Uma an?lise comparativa foi realizada atrav?s de caracteriza??es por XRD, FTIR, medidas de acidez atrav?s de dessor??o de n-butilamina por TGA, SEM-XRF e Adsor??o de N2. Tamb?m foi sintetizado um aluminossilicato cristalino com estrutura zeol?tica MFI do tipo ZSM-5, na aus?ncia total de direcionador org?nico. Metodologias relacionadas ? prepara??o desses materiais s?o relatadas pela literatura utilizando-se convencionalmente reagentes que forne?am os ?xidos de sil?cio e de alum?nio necess?rios, bem como um agente direcionador, e em alguns casos at? co-direcionadores. A busca por novas rotas de prepara??o para a ZSM-5 visou, sobretudo, a otimiza??o da mesma no que se refere ao tempo e ? temperatura de s?ntese, e principalmente a elimina??o do uso dos direcionadores org?nicos, que s?o materiais de alto custo e geralmente muito t?xicos. O atual estudo se baseia na utiliza??o da H2O e dos c?tions Na+ desempenhando o papel de direcionamento estrutural e compensa??o de cargas na estrutura. Caracteriza??es por XRD, FTIR, SEM-XRF e Adsor??o de N2 tamb?m foram realizadas para esse material, a fim de comparar as amostras de ZSM-5 sintetizadas na aus?ncia do direcionador e aquelas utilizadas industrialmente e sintetizadas utilizando estruturantes