1 |
Theoretical evaluation of the nonlinear optical properties of extended and p-conjugated chromophoresOhira, Shino. January 2009 (has links)
Thesis (Ph.D)--Chemistry and Biochemistry, Georgia Institute of Technology, 2009. / Committee Chair: Brédas, Jean-Luc; Committee Member: Janata, Jiri; Committee Member: Kippelen, Bernard; Committee Member: Marder, Seth; Committee Member: Sherrill, David. Part of the SMARTech Electronic Thesis and Dissertation Collection.
|
2 |
Design, synthesis, and characterization of organic and polymeric two-photon absorbing materials /Zheng, Lixin, January 2003 (has links)
Thesis (Ph. D.)--University of Washington, 2003. / Vita. Includes bibliographical references (leaves 143-146).
|
3 |
Detection of proteins by two-photon excitation of native fluorescence /Li, Li, January 2006 (has links) (PDF)
Thesis (M.S.)--Brigham Young University. Dept. of Chemistry and Biochemistry, 2006. / Includes bibliographical references.
|
4 |
Ultrafast two-photon absorption in organic molecules quantitative spectroscopy and applications /Makarov, Nikolay Sergeevich. January 2010 (has links) (PDF)
Thesis (PhD)--Montana State University--Bozeman, 2010. / Typescript. Chairperson, Graduate Committee: Aleksander Rebane. Includes bibliographical references (leaves 126-144).
|
5 |
Two-Photon Excitation, Fluorescence Microscopy, and Quantitative Measurement of Two-Photon Absorption Cross SectionsDeArmond, Fredrick Michael 01 December 2017 (has links)
As optical microscopy techniques continue to improve, most notably the development of super-resolution optical microscopy which garnered the Nobel Prize in Chemistry in 2014, renewed emphasis has been placed on the development and use of fluorescence microscopy techniques. Of particular note is a renewed interest in multiphoton excitation due to a number of inherent properties of the technique including simplified optical filtering, increased sample penetration, and inherently confocal operation. With this renewed interest in multiphoton fluorescence microscopy, comes an increased demand for robust non-linear fluorescent markers, and characterization of the associated tool set.
These factors have led to an experimental setup to allow a systematized approach for identifying and characterizing properties of fluorescent probes in the hopes that the tool set will provide researchers with additional information to guide their efforts in developing novel fluorophores suitable for use in advanced optical microscopy techniques as well as identifying trends for their synthesis.
Hardware was setup around a software control system previously developed [1]. Three experimental tool sets were set up, characterized, and applied over the course of this work. These tools include scanning multiphoton fluorescence microscope with single molecule sensitivity, an interferometric autocorrelator for precise determination of the bandwidth and pulse width of the ultrafast Titanium Sapphire excitation source, and a simplified fluorescence microscope for the measurement of two-photon absorption cross sections.
Resulting values for two-photon absorption cross sections and two-photon absorption action cross sections for two standardized fluorophores, four commercially available fluorophores, and ten novel fluorophores are presented as well as absorption and emission spectra.
|
6 |
Design of a bridge bumper to protect bridge girders against collisions of overheight vehiclesSharma, Hrishikesh 15 May 2009 (has links)
Bridges with low clearance are vulnerable to collision with overheight vehicles. Collisions of overheight vehicles can cause fatalities and injuries to the drivers and passengers of the overheight vehicles, and damage to bridge girders. The repair of the damaged bridges can be costly and time consuming. This research investigates the feasibility of developing a bridge bumper that minimizes the physical injuries and the likelihood of fatalities and protects the structural elements of bridges by absorbing the impact energy. The thesis describes a small-scale impact experiment using the proposed bridge bumper with several options of energy absorbing materials to protect a reinforced concrete beam. A finite element analysis is done to simulate the small-scale impact experiments. Optimization of the finite element model is carried out for the response quantities of interest with respect to the geometrical parameters and the material properties of the proposed bridge bumper. Such analysis can guide the design of an optimal bridge bumper that maximizes the energy dissipation and minimizes the damage to the bridge girder and the likelihood of fatalities and injuries.
|
7 |
Design of a bridge bumper to protect bridge girders against collisions of overheight vehiclesSharma, Hrishikesh 15 May 2009 (has links)
Bridges with low clearance are vulnerable to collision with overheight vehicles. Collisions of overheight vehicles can cause fatalities and injuries to the drivers and passengers of the overheight vehicles, and damage to bridge girders. The repair of the damaged bridges can be costly and time consuming. This research investigates the feasibility of developing a bridge bumper that minimizes the physical injuries and the likelihood of fatalities and protects the structural elements of bridges by absorbing the impact energy. The thesis describes a small-scale impact experiment using the proposed bridge bumper with several options of energy absorbing materials to protect a reinforced concrete beam. A finite element analysis is done to simulate the small-scale impact experiments. Optimization of the finite element model is carried out for the response quantities of interest with respect to the geometrical parameters and the material properties of the proposed bridge bumper. Such analysis can guide the design of an optimal bridge bumper that maximizes the energy dissipation and minimizes the damage to the bridge girder and the likelihood of fatalities and injuries.
|
8 |
Optical applications of two-photon and microexplosion lithography /Young, Aaron Cody. January 2007 (has links)
Thesis (Ph. D.)--University of Washington, 2007. / Vita. Includes bibliographical references (leaves 113-123).
|
9 |
Self-assembly and Photophysics of Selected Organic Materials and Two-photon Bioimaging with Profluorescent Nitroxides, Polyelectrolyte Nanoparticles, and Squaraine ProbesAhn, Hyo Yang 01 January 2011 (has links)
Two-photon absorption and upconverted fluorescence has been utilized in a variety of applications in pure science and engineering. Multiphoton-based techniques were used in this research in order to understand photophysical and chemical characteristics of several fluorescent dyes and to demonstrate some of their key applications. Two-photon fluorescence microscopy (2PFM) has become a powerful technique in bio-photonics for non-invasive imaging in the near-infrared (NIR) region (700~1000 nm) that often results in less photobleaching. In Chapter 1, there is a brief introduction to fluorescence, examples of fluorescence materials, and a discussion of the advantages of two-photon absorption. 2PFM imaging was utilized in Chapters 2 to 4 for various applications. In Chapter 2, a new squaraine dye is introduced and its linear and nonlinear photophysical properties are characterized. This compound has very high two-photon absorption (2PA) cross sections and high photostability both in an organic solvent and when encapsulated in micelles. Based on these properties, this dye was demonstrated as a near-infrared (NIR) probe in in vitro 2PFM imaging with excitation over 800 nm wavelength. In Chapter 3, new profluorescent nitroxides are introduced. Nitroxide radicals are utilized for electron paramagnetic resonance (EPR) spectroscopy and in biological systems as some are known, in some manner, to mimic the behavior of superoxide dismutase (SOD) that detoxifies or mitigates oxidative stress by trapping free radicals. Here, two profluorescent nitroxides investigated for use as a two-photon fluorescent oxidative stress indicator in in vitro two-photon fluorescence microscopy (2PFM) imaging. In Chapter 4, two-photon excited (2PE) fluorescence of a conjugated polyelectrolyte (CPE), PPESO3, was studied in methanol and in water. The results of CPE quenching studies were comparable under both one-photon excitation conditions and two-photon excitation. CPE coated silica nanoparticles were incubated in HeLa cells and 2PFM imaging was demonstrated for this new class of fluorescent probe. Supramolecular structures based on organized assemblies/aggregation of chromophores have attracted widespread interest as molecular devices with potential applications in molecular electronics, artificial light harvesting, and pharmacology. In Chapter 5, J-aggregate formation was investigated for two porphyrin-based dyes, 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS, 4) and an amino tris-sulfonate analog (5) in water via UV-vis, fluorescence, and lifetime decay studies. The effect of aggregation on two-photon absorption properties was also investigated. A functionalized norbornene-based homopolymer, synthesized by the ring opening metathesis polymerization technique was used as a J-aggregation enhancement template and had a role of polymer-templating to facilitate porphyrin aggregation and modulate 2PA. In Chapter 6, squaraine dye aggregates templated with single wall carbon nanotubes (SWCNTs) that were atomically clean were studied by using optical absorption spectroscopy, atomic force microscopy (AFM), and photoconductivity measurements. SWCNTs selectively promote the formation of squaraine dye aggregates with a head-to-head stacking arrangement, and these dye aggregates effectively photosensitize SWCNTs, demonstrating that this novel approach can yield highly photosensitized devices.
|
10 |
The Application of Two-photon Absorbing Probes in Lysosomal, Zinc Ion Sensing and Folate Receptor-targeted BioimagingWang, Xuhua 01 January 2011 (has links)
Two-photon fluorescence microscopy (2PFM) has become a powerful technique for bioimaging in non-invasive cancer diagnosis and also investigating the mechanization and original of a variety of diseases by tracking various biological processes. Because the fluorescence emission by two photon absorbing (2PA) is directly proportional to the square of the intensity of excitation light, this intrinsic property of 2PA provides 2PFM great advantages over traditional one-photon fluorescence microscopy (1PFM), including high 3D spatial localization, less photodamage and interference from biological tissue because of using longer wavelength excitation (700-1300 nm). However, most 2PA probes are hydrophobic and their photostabilities are questionable, severely limiting their biological and medical applications. In addition, probes with significant specificity for certain organelles for tracking cellular processes or metal ions for monitoring neural transmission are somewhat rare. Moreover, it is also very significant to deliver the probes to specific disease sites for early cancer diagnosis. In order to increase the water solubility of probes, polyethylene glycol (PEG) was introduced to a fluorene-based 2PA probe LT1 for lysosomal 2PFM cell imaging. The 2PFM bioimaging application of the novel two-photon absorbing fluorene derivative LT1, selective for the lysosomes of HCT 116 cancer cells is described in Chapter II. Linear and nonlinear photophysical and photochemical properties of the probe were investigated to evaluate the potential of the probe for 2PFM lysosomal imaging. After the investigation of the cytotoxicity of this new probe, colocalization studies of the probe with commercial lysosomal probe Lysotracker Red in HCT 116 cells were conducted. A high colocalization coefficient (0.96) was achieved and demonstrated the specific localization of the probe in lysosomes. A figure of merit, F[subscript M], was introduced by which all fluorescent probes for 2PFM can be compared. LT1 was demonstrated to have a number of properties that far exceed those of commercial lysotracker probes, including much higher 2PA cross sections, good fluorescence quantum yield, and, importantly, high photostability, all resulting in a superior figure of merit. Consequently, 2PFM was used to demonstrate lysosomal tracking with LT1. In addition to lysosomes, it is also very significant to investigate the physiological roles of free metal ions in biological processes, especially Zn²⁺, because Zn²⁺ normally serves either as the catalytic elements in enzymatic activity centers or as structural elements in enzymes and transcription factors. However, biocompatible and effective Zn²⁺ probes for 2PFM bioimaging are infrequent. In Chapter III, 2PFM bioimaging with a hydrophilic 2PA Zn²⁺ sensing fluorescent probe, bis(1,2,3-triazolyl)fluorene derivative, is described. 2PFM bioimaging of the probe in living HeLa cancer cells was demonstrated. The results revealed a significant fluorescence increase upon introduction of Zn²⁺ into the cancer cells, and a reversible Zn²⁺ binding to the probe was also demonstrated, providing a robust probe for two-photon fluorescence zinc ion sensing. Early cancer diagnosis is another critical application for 2PFM, but there are still huge challenges for this new technique in clinical areas. Most 2PA probes with large two-photon absorbing cross sections and fluorescence quantum efficiency are synthetically more accessible in hydrophobic forms. In order to increase the efficiency of the probes and minimize the effect of the probe on the human body, delivery of the probe specifically to cancer sites is desired. The synthesis and characterization of narrow dispersity organically modified silica nanoparticles (SiNPs), diameter ~30 nm, entrapping a hydrophobic two-photon absorbing fluorenyl dye, are reported in Chapter IV. The surface of the SiNPs was functionalized with folic acid to specifically deliver the probe to folate receptor (FR) over-expressing HeLa cells, making these folate 2PA dye-doped SiNPs potential candidates as probes for two-photon fluorescence microscopy (2PFM) bioimaging. In vitro studies using FR over-expressing HeLa cells demonstrated specific cellular uptake of the functionalized nanoparticles. However, when the concentration of the dye in SiNPs increased for higher signal output, the fluorescence quantum efficiency of a probe normally decreases because of self-quenching. In Chapter V, a near-infrared (NIR) emitting probe is reported to overcome this limitation through both aggregate-enhanced fluorescence emission and aggregate enhanced two-photon absorption. The dye was encapsulated in SiNPs and the surface of the nanoparticles was functionalized with PEG followed by a folic acid derivative to specifically target folate receptors. NIR emission is important for deep tissue imaging. In vitro studies using HeLa cells that upregulate folate receptors indicated specific cellular uptake of the folic acid functionalized SiNP nanoprobe. Meanwhile, the probe was also investigated for live animal imaging by employing mice bearing HeLa tumors for in vivo studies. Ex vivo 2PFM tumor imaging was then conducted to achieve high quality 3D thick tissue tumor images.
|
Page generated in 0.1248 seconds