Asynchronous Transfer Mode (ATM) Adaptation Layer Type 2 (AAL2) has been developed to carry low and variable bit rate traffic. It provides high bandwidth efficiency with low packing delay by allowing voice traffic from different AAL2 channels to be multiplexed onto a single ATM virtual channel connection. Examples of where AAL2 are used include the Code Division Multiple Access and the Third Generation mobile telephony networks. The main objective of this thesis is to study traditional and novel AAL2 multiplexing methods and to characterise their performance when carrying low and variable bit rate (VBR) voice traffic. This work develops a comprehensive QoS framework which is used as a basis to study the performance of the AAL2 multiplexer system. In this QoS framework the effects of packet delay, delay variation, subjective voice quality and bandwidth utilisation are all used to determine the overall performance of the end-to-end system for the support of real time voice communications. Extensions to existing AAL2 voice multiplexers are proposed and characterised. In the case where different types of voice applications are presented to the AAL2 multiplexer, it was observed that increased efficiency gains are possible when a priority queuing scheme is introduced into the traditional AAL2 multiplexer system. Studies of the voice traffic characteristics and their effects on the performance of the AAL2 multiplexer are also investigated. It is shown that particular source behaviours can have deleterious effect on the performance of the AAL2 multiplexer. Methods of isolating these voice sources are examined and the performance of the AAL2 multiplexer re-evaluated to show the beneficial effects of a particular source isolation technique. The extent to which statistical multiplexing is possible for real time variable VBR sources is theoretically examined. These calculations highlight the difficulties in multiplexing VBR real time traffic while maintaining guaranteed delay bounds for these sources. Based on these calculations, multiplexing schemes that incorporate data transfers within the real time traffic transfer are proposed as alternatives for utilising unused bandwidth caused by the VBR nature of the voice traffic.

LBIC is a technique for scanning the local quantum efficiency of solar cells. This kind of measurements needs a highly specialized, and time critical controlling software. In 1996 the client, professor Markus Rinio, constructed an LBIC system, and wrote the controlling software as a Turbo-Pascal 7.0 application, running under the MS-DOS 6.22 operating system. By now (2018) both the software and several hardware components are in dire need to be modernized. This thesis thoroughly describes several important aspects of this work, and the considerations needed for a successful result. This includes both very foundational choices about the software architecture, the choice of suitable operating system, the threading model, and the adaptation to new hardware with vastly different behavior. The project also included a new hardware module for position reports and instrument triggering, as well as several adaptations to transform the DOS-based LBIC software into a pleasant modern GUI application.