21 |
Le phénomène des tensions de rôle chez le directeur adjoint d'école de l'ordre d'enseignement secondaire du QuébecRoyal, Louise January 2007 (has links)
Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal.
|
22 |
Calibration of plant functional type parameters using the adJULES systemRaoult, Nina January 2017 (has links)
Land-surface models (LSMs) are crucial components of the Earth system models (ESMs) that are used to make coupled climate-carbon cycle projections for the 21st century. The Joint UK Land Environment Simulator (JULES) is the land-surface model used in the climate and weather forecast models of the UK Met Office. JULES is also extensively used offline as a land-surface impacts tool, forced with climatologies into the future. In this study, JULES is automatically differentiated with respect to JULES parameters using commercial software from FastOpt, resulting in an analytical gradient, or adjoint, of the model. Using this adjoint, the adJULES parameter estimation system has been developed to search for locally optimum parameters by calibrating against observations. This thesis describes adJULES in a data assimilation framework and demonstrates its ability to improve the model-data fit using eddy-covariance measurements of gross primary productivity (GPP) and latent heat (LE) fluxes. The adJULES system is extended to have the ability to calibrate over multiple sites simultaneously. This feature is used to define new optimised parameter values for the five plant functional types (PFTs) in JULES. The optimised PFT-specific parameters improve the performance of JULES at over 85% of the sites used in the study, at both the calibration and evaluation stages. The new improved parameters for JULES are presented along with the associated uncertainties for each parameter. The results of the calibrations are compared to structural changes and used in a cluster analysis in order to challenge the PFT definitions in JULES. This thesis concludes with simple sensitivity studies which assess how the calibration of JULES has affected the sensitivity of the model to CO2-induced climate change.
|
23 |
Robust and stable discrete adjoint solver development for shape optimisation of incompressible flows with industrial applicationsWang, Yang January 2017 (has links)
This thesis investigates stabilisation of the SIMPLE-family discretisations for incompressible flow and their discrete adjoint counterparts. The SIMPLE method is presented from typical \prediction-correction" point of view, but also using a pressure Schur complement approach, which leads to a wider class of schemes. A novel semicoupled implicit solver with velocity coupling is proposed to improve stability. Skewness correction methods are applied to enhance solver accuracy on non-orthogonal grids. An algebraic multi grid linear solver from the HYPRE library is linked to flow and discrete adjoint solvers to further stabilise the computation and improve the convergence rate. With the improved implementation, both of flow and discrete adjoint solvers can be applied to a wide range of 2D and 3D test cases. Results show that the semi-coupled implicit solver is more robust compared to the standard SIMPLE solver. A shape optimisation of a S-bend air flow duct from a VW Golf vehicle is studied using a CAD-based parametrisation for two Reynolds numbers. The optimised shapes and their flows are analysed to con rm the physical nature of the improvement. A first application of the new stabilised discrete adjoint method to a reverse osmosis (RO) membrane channel flow is presented. A CFD model of the RO membrane process with a membrane boundary condition is added. Two objective functions, pressure drop and permeate flux, are evaluated for various spacer geometries such as open channel, cavity, submerged and zigzag spacer arrangements. The flow and the surface sensitivity of these two objective functions is computed and analysed for these geometries. An optimisation with a node-base parametrisation approach is carried out for the zigzag con guration channel flow in order to reduce the pressure drop. Results indicate that the pressure loss can be reduced by 24% with a slight reduction in permeate flux by 0.43%.
|
24 |
Adjoint-Based Optimization of Turbomachinery With Applications to Axial and Radial TurbinesMüller, Lasse 07 January 2019 (has links) (PDF)
Numerical optimization methods have made significant progress over the last decades and play an important role in modern industrial design processes. In most cases, gradient-free algorithms are used, which only require the value of the objective function in each optimization step. These methods are robust and can be integrated into a standard design process at low implementation effort. However, in aerodynamic design problems using high-fidelity Computational Fluid Dynamics (CFD), the computational cost is high, especially when a large number of design parameters are used. Gradient-based methods, on the other hand, are particularly suited for problems involving large design spaces and generally converge to a local optimum in a few design cycles. However, the computational efficiency of these methods is mainly determined by the gradient calculation.This thesis presents the development of an efficient gradient-based optimization framework for the aerodynamic design of turbomachinery applications. In particular, the adjoint approach is used to evaluate the gradients of the objective function with respect to all design parameters at low computational cost. The present work covers the various components of the optimization framework, including the solution of the flow governing equations, adjoint-based sensitivity analysis, geometry parameterization, and mesh generation. A substantial part of the thesis describes the implementation and validation of those components. The flow solver is a Reynolds-Averaged Navier-Stokes code applicable to multiblock structured grids. The spatial discretization is realized with a Roe-type upwind scheme with a MUSCL extrapolation for second order spatial accuracy. Viscous fluxes are centrally discretized, and for the turbulence closure problem the Spalart-Allmaras and the Shear-Stress Transport (SST) models are used. The code uses an implicit multistage Runge-Kutta time-stepping scheme, accelerated by local time-stepping and geometric multigrid. The corresponding discrete adjoint solver uses the same time marching scheme as the flow solver and features similar performance characteristics in terms of runtime and memory footprint. The adjoint solver has been implemented primarily by hand with selective use of algorithmic differentiation (AD) to simplify the development. The geometry parameterization is based on B-Spline representations which has two main advantages: (a) the simple integration of geometric constraints for structural requirements, and (b) the connection to Computer-Aided Design (CAD) software for manufacturing. The whole optimization framework is driven by a Sequential Quadratic Programming (SQP) algorithm. The proposed framework has been successfully applied to optimize axial and radial turbines on multiple operating points subject to aerodynamic and geometric constraints. The different studies show the effectiveness of the developed method in terms of improved performances and computational cost. In particular, a comparative study shows that the proposed method is able to find optimized blade shapes at a computational time which is about one order of magnitude lower compared to a gradient-free optimization algorithm. / Doctorat en Sciences de l'ingénieur et technologie / info:eu-repo/semantics/nonPublished
|
25 |
Total variation and adjoint state methods for seismic wavefield imagingAnagaw, Amsalu Y. 11 1900 (has links)
Many geophysical inverse problems are ill-posed and have to be regularized. The most often used solution methods for solving ill-posed problems are based on the use of quadratic regularization that results in smooth solutions. Solutions of this type are not to be suitable when the model parameter is piecewise continuous blocky and edges are desired in the regularized solution. To avoid the smoothing of edges, which are very important attributes of an image, an edge-preserving regularization (non-quadratic regularization) term has to be employed. Total Variation (TV) regularization is one of the most effective regularization techniques for allowing sharp edges and the existence of discontinuities in the solutions.
The edge-preserving regularization based on the TV method for small-scale geophysical inverse problems to the problem of estimating the acoustic velocity perturbation from a multi-source-receiver geophysical experiment is studied. The acoustic velocity perturbation is assumed to be piecewise continuous and blocky. The problem is based on linearization acoustic modeling using the framework of the single-scattering Born approximation from a known constant background medium. To solve this non-linear and ill-posed problem, an iterative scheme based on the conjugate gradient method is employed. The TV regularization method provides us with the opportunity to recover more useful information of velocity profiles from the measured seismic data. Though it requires more effort in implementing the TV term to control the smoothing and regularization parameter, the algorithm possesses the strong ability of marking the discontinuities and ensures their preservation from over-smoothing. / Geophysics
|
26 |
Optimal initial perturbations in streamwise corner-flowSchmidt, Oliver T., Hosseini, Seyed M., Rist, Ulrich, Hanifi, Ardeshir, Henningson, Dan January 2013 (has links)
Localised optimal initial perturbations are studied to gain an understanding of the global stability properties of streamwise corner-flow. A self-similar and a modified base-flow are considered. The latter mimics a characteristic deviation from the self-similar solution, commonly observed in experiment. Poweriterations in terms of subsequent direct and adjoint linearised Navier-Stokes solution sweeps are employed to converge optimal solutions for two optimisation times. The optimal response manifests as a wave packet that initially gains energy through the Orr mechanism and continues growing exponentially thereafter. The study at hand represents the first global stability analysis of streamwise corner-flow and confirms key observations made in theoretical and/or experimental work on the subject. Namely, the presence of an inviscid instability mechanism in the near-corner region and a destabilising effect of the characteristic mean-flow deformation found in experiment. / <p>QC 20130604</p>
|
27 |
Bayesian inference for source determination in the atmospheric environmentKeats, William Andrew January 2009 (has links)
In the event of a hazardous release (chemical, biological, or radiological) in an urban environment, monitoring agencies must have the tools to locate and characterize the source of the emission in order to respond and minimize damage. Given a finite and noisy set of concentration measurements, determining the source location, strength and time of release is an ill-posed inverse problem. We treat this problem using Bayesian inference, a framework under which uncertainties in modelled and measured concentrations can be propagated, in a consistent, rigorous manner, toward a final probabilistic estimate for the source.
The Bayesian methodology operates independently of the chosen dispersion model, meaning it can be applied equally well to problems in urban environments, at regional scales, or at global scales. Both Lagrangian stochastic (particle-tracking) and Eulerian (fixed-grid, finite-volume) dispersion models have been used successfully. Calculations are accomplished efficiently by using adjoint (backward) dispersion models, which reduces the computational effort required from calculating one [forward] plume per possible source configuration to calculating one [backward] plume per detector. Markov chain Monte Carlo (MCMC) is used to efficiently sample from the posterior distribution for the source parameters; both the Metropolis-Hastings and hybrid Hamiltonian algorithms are used.
In this thesis, four applications falling under the rubric of source determination are addressed: dispersion in highly disturbed flow fields characteristic of built-up (urban) environments; dispersion of a nonconservative scalar over flat terrain in a statistically stationary and horizontally homogeneous (turbulent) wind field; optimal placement of an auxiliary detector using a decision-theoretic approach; and source apportionment of particulate matter (PM) using a chemical mass balance (CMB) receptor model. For the first application, the data sets used to validate the proposed methodology include a water-channel simulation of the near-field dispersion of contaminant plumes in a large array of building-like obstacles (Mock Urban Setting Trial) and a full-scale field experiment (Joint Urban 2003) in Oklahoma City. For the second and third applications, the background wind and terrain conditions are based on those encountered during the Project Prairie Grass field experiment; mean concentration and turbulent scalar flux data are synthesized using a Lagrangian stochastic model where necessary. In the fourth and final application, Bayesian source apportionment results are compared to the US Environmental Protection Agency's standard CMB model using a test case involving PM data from Fresno, California. For each of the applications addressed in this thesis, combining Bayesian inference with appropriate computational techniques results in a computationally efficient methodology for performing source determination.
|
28 |
Bayesian inference for source determination in the atmospheric environmentKeats, William Andrew January 2009 (has links)
In the event of a hazardous release (chemical, biological, or radiological) in an urban environment, monitoring agencies must have the tools to locate and characterize the source of the emission in order to respond and minimize damage. Given a finite and noisy set of concentration measurements, determining the source location, strength and time of release is an ill-posed inverse problem. We treat this problem using Bayesian inference, a framework under which uncertainties in modelled and measured concentrations can be propagated, in a consistent, rigorous manner, toward a final probabilistic estimate for the source.
The Bayesian methodology operates independently of the chosen dispersion model, meaning it can be applied equally well to problems in urban environments, at regional scales, or at global scales. Both Lagrangian stochastic (particle-tracking) and Eulerian (fixed-grid, finite-volume) dispersion models have been used successfully. Calculations are accomplished efficiently by using adjoint (backward) dispersion models, which reduces the computational effort required from calculating one [forward] plume per possible source configuration to calculating one [backward] plume per detector. Markov chain Monte Carlo (MCMC) is used to efficiently sample from the posterior distribution for the source parameters; both the Metropolis-Hastings and hybrid Hamiltonian algorithms are used.
In this thesis, four applications falling under the rubric of source determination are addressed: dispersion in highly disturbed flow fields characteristic of built-up (urban) environments; dispersion of a nonconservative scalar over flat terrain in a statistically stationary and horizontally homogeneous (turbulent) wind field; optimal placement of an auxiliary detector using a decision-theoretic approach; and source apportionment of particulate matter (PM) using a chemical mass balance (CMB) receptor model. For the first application, the data sets used to validate the proposed methodology include a water-channel simulation of the near-field dispersion of contaminant plumes in a large array of building-like obstacles (Mock Urban Setting Trial) and a full-scale field experiment (Joint Urban 2003) in Oklahoma City. For the second and third applications, the background wind and terrain conditions are based on those encountered during the Project Prairie Grass field experiment; mean concentration and turbulent scalar flux data are synthesized using a Lagrangian stochastic model where necessary. In the fourth and final application, Bayesian source apportionment results are compared to the US Environmental Protection Agency's standard CMB model using a test case involving PM data from Fresno, California. For each of the applications addressed in this thesis, combining Bayesian inference with appropriate computational techniques results in a computationally efficient methodology for performing source determination.
|
29 |
Scattered neutron tomography based on a neutron transport problemScipolo, Vittorio 01 November 2005 (has links)
Tomography refers to the cross-sectional imaging of an object from either transmission or reflection data collected by illuminating the object from many different directions. Classical tomography fails to reconstruct the optical properties of thick scattering objects because it does not adequately account for the scattering component of the neutron beam intensity exiting the sample.
We proposed a new method of computed tomography which employs an inverse problem analysis of both the transmitted and scattered images generated from a beam passing through an optically thick object.
This inverse problem makes use of a computationally efficient, two-dimensional forward problem based on neutron transport theory that effectively calculates the detector readings around the edges of an object. The forward problem solution uses a Step-Characteristic (SC) code with known uncollided source per cell, zero boundary flux condition and Sn discretization for the angular dependence. The calculation of the uncollided sources is performed by using an accurate discretization scheme given properties and position of the incoming beam and beam collimator. The detector predictions are obtained considering both the collided and uncollided components of the incoming radiation.
The inverse problem is referred as an optimization problem. The function to be minimized, called an objective function, is calculated as the normalized-squared error between predicted and measured data. The predicted data are calculated by assuming a uniform distribution for the optical properties of the object. The objective function depends directly on the optical properties of the object; therefore, by minimizing it, the correct property distribution can be found. The minimization of this multidimensional function is performed with the Polack Ribiere conjugate-gradient technique that makes use of the gradient of the function with respect to the cross sections of the internal cells of the domain.
The forward and inverse models have been successfully tested against numerical results obtained with MCNP (Monte Carlo Neutral Particles) showing excellent agreements.
The reconstructions of several objects were successful. In the case of a single intrusion, TNTs (Tomography Neutron Transport using Scattering) was always able to detect the intrusion. In the case of the double body object, TNTs was able to reconstruct partially the optical distribution. The most important defect, in terms of gradient, was correctly located and reconstructed. Difficulties were discovered in the location and reconstruction of the second defect.
Nevertheless, the results are exceptional considering they were obtained by lightening the object from only one side. The use of multiple beams around the object will significantly improve the capability of TNTs since it increases the number of constraints for the minimization problem.
|
30 |
Total variation and adjoint state methods for seismic wavefield imagingAnagaw, Amsalu Y. Unknown Date
No description available.
|
Page generated in 0.0418 seconds