Thesis advisor: Amir H. Hoveyda / Chapter 1. A Review of Catalytic Enantioselective Allylic Substitution (EAS) with Chiral Sulfonate Containing N-heterocyclic Carbenes (NHC). A comprehensive review of enantioselective allylic substitution reactions, which are promoted by a chiral N-heterocyclic carbene metal complex that features a unique sulfonate motif, is provided in this chapter. Reactions are classified into two categories. One class of transformations is catalyzed by a series of easily modifiable sulfonate bearing NHC-Cu complexes, with which a range of nucleophilic organometallic reagents (i.e., organozinc-, aluminum-, magnesium- and boron-based) that carry different carbon-based units are readily utilized in efficient and highly selective C-C bond forming processes. Another set of reactions exclude the use of a copper salt; catalytic amount of a sulfonate containing imidazolinium salt is capable of promoting additions of alkyl Grignard, zinc and aluminum species to easily available allylic electrophiles in a site- and enantioselective fashion. The mechanistic scenarios of both catalytic systems that account for the observed experimental data are discussed in detail. Chapter 2. Cu-Catalyzed Enantioselective Allylic Substitutions with Aryl- and Heteroarylaluminum Reagents. In this chapter, the first examples of EAS reactions of aryl- and heteroaryl-substituted dialkylaluminum reagents to a wide range of trisubstituted allylic phosphates are demonstrated through a facile and selective catalysis rendered possible by an in situ generated sulfonate containing NHC-Cu complex, delivering enantiomerically enriched olefin products that bear an all carbon quaternary stereogenic center. The requisite organometallic species are easily prepared from either the corresponding aryl- and heteroaryl halides, or through efficient and site selective deprotonation at the C-2 position of furan and thiophene; such aluminum entities are readily used in situ without the requirement of purification. Application to small molecule natural product synthesis is also carried out to illustrate the utility of the present protocol. Chapter 3. Cu-Catalyzed Enantioselective Allylic Substitutions with Alkenylaluminum Reagents. This chapter focuses on our research towards construction of enantioenriched tertiary and quaternary stereogenic centers that are substituted with two further functionalizable alkenes. The first combination of the study involves the addition of stereochemically well-defined trisubstituted alkenylaluminum reagents to disubstituted allylic phosphates; the transformation commences with a silyl-directed stereoselective hydroalumination and finishes with an enantioselective Cu-catalyzed EAS promoted by a sulfonate bearing NHC. Such reactions deliver molecules that feature silicon containing trisubstituted olefin adjacent to the tertiary stereogenic center; subsequent conversion of the versatile silicon group to a proton reveals the first set of examples that incorporate pure Z alkene in Cu-catalyzed EAS. The stereoselective and concise synthesis of naturally occurring small molecule nyasol demonstrates the utility of the above method. On a different front, Ni-catalyzed site-selective hydroalumination of terminal alkynes has opened new possibility of introducing 1,1-disubstituted olefins in Cu-catalyzed EAS in the formation of tertiary stereogenic center containing enantioenriched organic building blocks. Such catalytic hydrometallation procedure also allows efficient access to alkenylaluminums that are derived from the conventionally problematic aromatic alkynes. The importance of efficient and selective synthesis of terminal aryl-substituted alkenylaluminum species is showcased in NHC-Cu-catalyzed EAS reactions that construct all-carbon quaternary stereogenic centers; a three-step convergent synthesis of natural product bakuchiol in enantiomerically enriched form highlights the potential of the current protocol in chemical synthesis. Chapter 4 Cu-Catalyzed Enantioselective Allylic Substitutions with Alkenylboronic Acid Pinacol Ester Reagents and Applications in Natural Product Synthesis. Within this chapter, we disclose the efficient utilization of alkenylboron reagents in Cu-catalyzed EAS reactions, which lead to highly site and enantioselective formations of molecules that contain both tertiary and quaternary carbon stereogenic centers. Unlike their aluminum-based counterparts, the use of boron-based reagents allows effective delivery of sensitive organic function groups, such as a carbonyl, which would be incompatible in the hydrometallation process with dibal-H. Our efforts accumulate to the first report of incorporation of all carbon quaternary centers that are substituted with unsaturated ester and aldehyde units in the EAS products; such a method facilitates the concise diastereo- and enantioselective synthesis of Pummerer's ketone and it's trans isomer. Further development of the above protocol towards the construction of tertiary stereogenic centers requires the design of new chiral sulfonate-containing imidazolinium salts as the ligand precursors and has lead to the employment of a broader range of alkenylboron species, which feature readily functionalizable motifs. Subsequent demonstrations in enantioselective synthesis of a variety of small molecule natural products showcase the utility. / Thesis (PhD) — Boston College, 2013. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Chemistry.

Thesis advisor: Amir H. Hoveyda / Chapter 1 Catalytic Enantioselective Addition of Organoaluminum Reagents Catalytic methods involving the enantioselective addition of both commercially available as well as in situ generated organoaluminum reagents are reviewed. An overview of additions to aldehydes, ketones, and imines is provided as well as the difficulties and limitations of such transformations. Furthermore, additions to unsaturation adjacent to a leaving group to form a new stereogenic center are examined. Finally, conjugate addition reactions wherein an organoaluminum reagent is added to an olefin adjacent to a carbonyl or nitro group are discussed. Chapter 2 Synthesis of Quaternary Carbon Stereogenic Centers through Enantioselective Cu-Catalyzed Allylic Substitution with Alkenylaluminum Reagents A method for the formation of 1,4-diene containing quaternary stereogenic centers through catalytic enantioselective allylic substitution is disclosed. The addition of alkyl- and aryl-substituted alkenylaluminum reagents to trisubstituted allylic phosphates is promoted by 0.5–2.5 mol % of a sulfonate-containing bidentate N-heterocyclic carbene–copper complex. Products containing a quaternary stereogenic center as well as a newly formed terminal olefin are obtained in up to 97% yield and 99:1 er with high site selectivity (>98:2 SN2’:SN2). The requisite nucleophiles are generated in situ through hydroalumination of terminal alkynes. The utility of the method is demonstrated through a concise synthesis of natural product bakuchiol. Chapter 3 A Multicomponent Ni-, Zr-, Cu-Catalyzed Strategy for Enantioselective Synthesis of Alkenyl-Substituted Quaternary Carbons Despite the widespread use of conjugate addition in organic synthesis, few reports pertain to the addition of nucleophiles to acyclic systems and none in which the nucleophile is an alkene. Herein, we report the first examples of enantioselective conjugate addition of alkenylmetal reagents to trisubstituted enones to form all-carbon quaternary stereogenic centers. Alkenylaluminum nucleophiles are prepared through a site-selective Ni-catalyzed hydroalumination of terminal alkynes and the requisite E-trisubsituted enones are the products of a regioselective Zr-catalyzed carboalumination/acylation of a terminal alkyne. Products are obtained in up to 97% yield and 99:1 er. A model for enantioselectivity, supported by DFT calculations, is proposed. Chapter 4 Formation of Tertiary Centers through Catalytic Enantioselective Conjugate Addition of Alkenylaluminum Reagents to Acyclic Enones We have developed an enantioselective NHC–Cu catalyzed synthesis of tertiary centers in acyclic systems using in situ generated alkenylaluminum reagents, as current methods typically rely on Rh-catalysis at high temperatures with alkenyl boronic acids in protic solvents. Moreover, most examples include chalcone-derived substrates, which, while more reactive, often preclude further functionalization. With the current method, we are able to couple a variety of alkenyl nucleophiles with α,β-unsaturated ketones. E- or Z-silylalkenylaluminum reagents, derived from hydroalumination of silyl-protected alkynes, lead to products in good yields and high enantioselectivities. Additionally, both the α- and β-alkenylaluminum reagents participate in the reaction. Chapter 5 Development of N-Heterocyclic Carbene–Cu Catalyzed Allylic Substitution of Diboryl Methane to Morita-Baylis-Hillman Derived Allylic Phosphates We have developed a method for the coupling of a geminyl diboron reagent with Morita-Baylis-Hillman derived trisubstituted ester-containing allylic phosphates. With 10 mol % of an in situ generated NHC–Cu complex and 1.5 equivalents of the boron reagent, we are able to form the desired product in high regio- and enantioselectivity with a 2,5-ditert-butyl containing carbene. Simple aryl substituents as well as those containing a halogen or an electron-withdrawing group furnish the desired products in up to 85% yield and 98:2 er. Alkyl-containing substrates are also competent reaction partners, although longer chain aliphatics results in slightly diminished enantioselectivity. We are pursuing the application of this method to the synthesis of α-methylene lactones which can be further functionalized to natural products like tubulin polymerization inhibitor (–)-steganone and glaucoma medication (+)-pilocarpine. / Thesis (PhD) — Boston College, 2016. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Chemistry.

Upon treatment with a palladium catalyst and hydrogen gas in the presence of caesium carbonate, a wide range of exomethylenic allylic alcohols were found to afford their corresponding trisubstituted isomers. Although hydrogenation was an unavoidable competing pathway, careful monitoring of the reaction progress allowed the desired isomerised products to be obtained in moderate to excellent yields and high (E):(Z) ratios.

The palladium-catalysed asymmetric allylic alkylation is a mild and versatile bond forming reaction between a nucleophile and allylic electrophile. The wide scope of nucleophiles used, and the high regio- and stereoselectivity obtainable renders this transformation an important technique in enantioselective synthesis. The mechanism is known to go via a key palladium π-allyl intermediate, followed by nucleophilic addition occurring at the terminal allylic carbon. Both the formation of the palladium π-allyl, and the nucleophilic addition to generate the alkylated product and palladium(0) proceed with high levels of inversion of stereochemistry, and both provide an opportunity for the induction of stereochemistry. However in the case of ligand controlled nucleophilic addition memory effects have been observed. The epimerisation of the palladium π-allyl before nucleophilic attack is key to achieving high levels of selectivity when racemic starting materials and chiral ligands are employed. Previous work in the Lloyd-Jones group has determined that prolonging the lifetime of the palladium π-allyl species, either by the use of weakly coordinating counter ions or slow addition of the nucleophile reduces this memory effect, however increasing the rate of epimerisation would have a result in a similar effect. One of the mechanisms resulting in the epimerisation of the palladium π-allyl species is mediated by palladium(0), however the details of the mechanism are not well understood. We describe the synthesis of a diastereotopic palladium cyclohexenyl ester and labelled the complex with 108palladium and d3 at the cyclohexenyl ester. Using simultaneous 31P NMR and mass spectrometry, we have acquired strong evidence against mechanisms involving a single electron transfer, as proposed by Stille, of formation of a dinuclear palladium(I) species followed by an inversion event, and we have gained evidence supporting the direct nucleophilic addition of the palladium(0), resulting in inversion of stereochemistry. The differences in rates of nucleophilic attack involving monodentate and bidentate phosphine ligands on both the palladium I-cyclohexenyl ester have also been explored. Throughout the mechanistic investigation, it was noted that the 31P NMR spectroscopy experiment used gave non-quantitative results, and in fact the differences in quantification of the species varied with the spectrometer used. We also describe our investigations into where these differences arise from and an optimum set of parameters for quantitative 31P NMR spectroscopy. The conclusions are also applicable to other heternuclear NMR spectroscopic experiments.

The Johnson-Claisen rearrangement is a valuable method for the formation of new carbon-carbon bonds, however the rearrangement suffers from high reaction temperatures and prolonged reaction times. On the basis of previous research into substituent-induced rate enhancements of the Claisen rearrangement, we aimed to reduce the severity of the Johnson-Claisen conditions by applying this reaction to allylic cyanohydrins. Application of the standard Johnson-Claisen conditions (excess of orthoester and catalytic protic acid) to allylic cyanohydrins resulted in their decomposition to a,b- unsaturated aldehydes. The anticipated d-ethoxycarbonyl-a,b-unsaturated nitriles were formed in trace amounts. Subsequent optimisation of this reaction has allowed a practical entry into a,b- unsaturated nitriles in reasonable yields, however high reaction temperatures were necessary for an efficient conversion. Clearly, a change of approach was desired; we have since discovered that mixed orthoesters derived from allylic alcohols undergo methanol elimination in the presence of triisobutylaluminium (TIBAL) at room temperature to form mixed ketene acetals. TIBAL then promotes immediate Claisen rearrangement of these intermediates, and subsequent reduction of the ester products to yield, g,d- unsaturated primary alcohols in a convenient one-pot procedure, with yields ranging from 52-81% and with a range of functional group tolerance.

The results of kinetic isotope determination and computational studies on Noyori-type catalytic systems for the hydrogenation of ketones are presented. The catalysts examined include RuH2(NHCMe2CMe2NH2)(R-binap) and RuH(NHCMe2CMe2NH2)(PPh3)2. These complexes are active catalysts for ketone hydrogenation in benzene without addition of an external base. The kinetic isotope effect (KIE) for catalysis by RuH2(NHCMe2CMe2NH2)(R-binap) was determined to be 2.0 ± (0.1). The calculated KIE for the model system RuH(NHCH2CH2NH2)(PH3)2 was 1.3, which is smaller than the experimentally observed value but does not include tunneling effects. The complex OsH(NHCMe2CMe2NH2)(PPh3)2 is known to display autocatalytic behaviour when it catalyzes the hydrogenation of acetophenone in benzene. Pseudo first-order reaction conditions are obtained via addition of the product alcohol at the beginning of each kinetic experiment. The KIE determined using various combinations of deuterium-labeled gas, alcohol and ketone was found to be 1.1 ± (0.2). DFT calculations were used to explore the effect of the alcohol and the KIE. An induction period is observed at the start of the hydrogenation that is attributed to the formation of an alkoxide complex. A novel, diamine-orchestrated hydrogen-bonding network is proposed based on DFT calculations to explain how the alkoxide is converted back to the active catalyst. The tetradentate complexes trans-RuHCl[PPh2(ortho-C6H4)CH2NHCH2)]2 and RuHCl[PPh2(ortho-C6H4)CH2NHCMe2)]2 are known to be catalysts for the hydrogenation of acetophenone and benzonitrile in toluene when activated by KOtBu/KH. DFT studies were performed and a mechanism is proposed. The calculated rate limiting step for acetone hydrogenation was found to be heterolytic splitting of dihydrogen, which agrees well with experiment. The novel outer-sphere sequential hydrogenation of a CN triple bond and then a C=N double bond is proposed. A mechanism is proposed, which is supported by DFT studies, to explain the selectivity observed in the nucleophilic attack of amines or aziridines on palladium -prenyl phosphines complexes. Calculations on based on a palladium complex with two phosphorus donor ligands indicated that the observed selectivity would not be produced. Using two new model intermediates with either THF or aziridine substituted for a phosphine ligand trans to the unhindered side of the prenyl ligand did predict the experimentally observed selectivity.

The results of kinetic isotope determination and computational studies on Noyori-type catalytic systems for the hydrogenation of ketones are presented. The catalysts examined include RuH2(NHCMe2CMe2NH2)(R-binap) and RuH(NHCMe2CMe2NH2)(PPh3)2. These complexes are active catalysts for ketone hydrogenation in benzene without addition of an external base. The kinetic isotope effect (KIE) for catalysis by RuH2(NHCMe2CMe2NH2)(R-binap) was determined to be 2.0 ± (0.1). The calculated KIE for the model system RuH(NHCH2CH2NH2)(PH3)2 was 1.3, which is smaller than the experimentally observed value but does not include tunneling effects. The complex OsH(NHCMe2CMe2NH2)(PPh3)2 is known to display autocatalytic behaviour when it catalyzes the hydrogenation of acetophenone in benzene. Pseudo first-order reaction conditions are obtained via addition of the product alcohol at the beginning of each kinetic experiment. The KIE determined using various combinations of deuterium-labeled gas, alcohol and ketone was found to be 1.1 ± (0.2). DFT calculations were used to explore the effect of the alcohol and the KIE. An induction period is observed at the start of the hydrogenation that is attributed to the formation of an alkoxide complex. A novel, diamine-orchestrated hydrogen-bonding network is proposed based on DFT calculations to explain how the alkoxide is converted back to the active catalyst. The tetradentate complexes trans-RuHCl[PPh2(ortho-C6H4)CH2NHCH2)]2 and RuHCl[PPh2(ortho-C6H4)CH2NHCMe2)]2 are known to be catalysts for the hydrogenation of acetophenone and benzonitrile in toluene when activated by KOtBu/KH. DFT studies were performed and a mechanism is proposed. The calculated rate limiting step for acetone hydrogenation was found to be heterolytic splitting of dihydrogen, which agrees well with experiment. The novel outer-sphere sequential hydrogenation of a CN triple bond and then a C=N double bond is proposed. A mechanism is proposed, which is supported by DFT studies, to explain the selectivity observed in the nucleophilic attack of amines or aziridines on palladium -prenyl phosphines complexes. Calculations on based on a palladium complex with two phosphorus donor ligands indicated that the observed selectivity would not be produced. Using two new model intermediates with either THF or aziridine substituted for a phosphine ligand trans to the unhindered side of the prenyl ligand did predict the experimentally observed selectivity.

Orientador: Lucia Helena Brito Baptistella / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Quimica / Made available in DSpace on 2018-08-12T12:46:19Z (GMT). No. of bitstreams: 1 Hardy_LucasDrezza_M.pdf: 14614232 bytes, checksum: 4408ec95d3c1b1cea15f8a31fef54c48 (MD5) Previous issue date: 2007 / Resumo:O a-(-)-bisabolol (1) é um sesquiterpeno bisabolano isolado de óleos essenciais de uma grande variedade de plantas, e muito conhecido principalmente por suas atividades farmacológicas. Rotas sintéticas visando a obtenção da (+)-hernandulcina e do acetato do (1S)-1-hidroxi-óxido de bisabolol A, outros sesquiterpenos naturais do tipo bisabolano com atividade adocante e antimalária, respectivamente, tiveram como etapas iniciais tentativas de oxidações alílicas sobre a olefina endocíclica do (-)-1, as quais forneceram diversos produtos. Como meio de diminuir a formação dos produtos laterais frente a estas oxidações, bem como favorecer a formação de derivados cíclicos do (-)-1, úteis quando se visa a síntese do acetato do acetato do (1S)-1-hidroxi-óxido de bisabolol A, a cadeia lateral hidroxílica g,d-insaturada do (-)-1 foi ciclizada utilizando como eletrófilos o iodo e bromo. Em oposição ao que desejávamos, em todas as ciclizações testadas foi verificada a formação majoritária dos derivados tetraidrofuranicos (THF), atribuida, em função dos dados obtidos ao longo do trabalho, a fatores estruturais do substrato e do meio de reação. Testes de oxidações sobre os derivados tetraidrofuranicos (THF) e tetraidropiranicos (THP) de (-)-1 isolados, permitiram verificar que a formação dos derivados oxidados desejados ocorria apenas sobre os derivados THP. Após esta constatação, vários testes visando expansão do anel THF a THP, bem como metodologias para obtenção seletiva dos derivados THP a partir de (-)-1 foram conduzidos, e alguns bons resultados foram obtidos. Adicionalmente, propos-se, ao final do trabalho, uma nova rota para obtenção dos derivados THP a partir de (-)-1, baseada na utilização do linalool como precursor das ciclizações. Paralelamente ao trabalho, diversos compostos obtidos foram submetidos a estudos de atividade antiproliferativa frente a linhagens de celulas tumorais, que permitiram observar que a funcionalização do anel p-mentânico de (-)-1 e um dos fatores responsáveis pela atividade apresentada pelos compostos. / Abstract: The a-(-)-bisabolol (1) is a bisabolene sesquiterpene isolated from the essential oil of several plants, and its pharmacological activities are well known. Synthetic studies envisaging (+)-hernandulcin and (1S)-1-hydroxi-oxide bisabolol A acetate, natural bisabolane sesquiterpenes with sweetener and antimalarial activities, respectively, had been initiated using endocyclic allylic oxidation reactions, which lead to a mixture of products. In order to minimize the formation of by-products and to obtain cyclic derivatives of (-)-1, useful as intermediates for the synthesis of (1S)-1-hidroxi-oxido de bisabolol A, the hydroxylic g,d-unsaturated system of the a-bisabolol was submitted to cyclization reactions using iodine and bromine as electrophiles. In opposition with the expectations, all reactions led to the formation of the THF derivatives as the major products, and it was attributed to the structural features of the substrate and to the reaction conditions. Allylic oxidation essays on the isolated THF and THP derivatives were successfully performed only with the six member ring isomers. Several reactions aiming the THF ring expansion, as well as other methods envisaging the selective preparation of the THP derivative from (-)-1, some of them leading to good results, were also carried out. In addition to these studies, a new synthetic route for the preparation of tetrahydropyran derivatives was proposed from linalool and the initial essays were conduced. Some new compounds obtained in this research project were also submitted to antiproliferative essays. / Mestrado / Quimica Organica / Mestre em Química

Thesis advisor: Amir H. Hoveyda / Chapter 1. Catalytic SN2”-Selective and Enantioselective Substitution Reactions. The first broadly applicable strategy for SN2”-selective and enantioselective catalytic allylic substitution will be presented. It will be shown that transformations can be promoted by 5.0 mol% of a sulfonate-containing NHC–Cu complex (NHC = N-heterocyclic carbene), and may be carried out by the use of a commercially available allenyl–B(pin) (pin = pinacolato) or a readily accessible silyl protected propargyl–B(pin). Products bearing a 1,3 diene, a silyl allenyl or a propargyl moiety were obtained in high efficiency and selectivities. Also provided is insight regarding several of the unique mechanistic attributes of the catalytic process, obtained on the basis of kinetic isotope effect measurements and DFT studies. These investigations indicated that cationic π-allyl–Cu complexes are the likely intermediates, clarifying the role of the s-cis and s-trans conformers of the intermediate organocopper species and their impact on E:Z selectivity and enantioselectivity. It will also be shown we were able to highlight the utility of the approach by chemoselective functionalization of various product types, through which the propargyl, allenyl, or 1,3-dienyl sites within the products can be converted catalytically and chemoselectively to several synthetically useful derivatives. Chapter 2. NHC–Copper–Hydride-Catalyzed Enantioselective Processes with Allenyl Boronates and its Application in Natural Product Synthesis. Here, the development of a catalytic process that delivers otherwise difficult-to-access organoboron compound will be detailed. These processes involve the combination of a hydride, an allenyl–B(pin) and an allylic phosphate. As will be discussed, two unique selectivity problems were solved: avoiding rapid Cu–H reduction of an allylic phosphate, while promoting its addition to an allenylboronate as opposed to the commonly observed Cu–B exchange. We were able to underscore the considerable utility of the approach by applications to preparation of the linear fragment of pumiliotoxin B (myotonic, cardiotonic) and the first enantioselective synthesis of netamine C (anti-tumor), which also served to confirm its stereochemical identity. Chapter 3. Catalytic Enantioselective Prenyl Conjugate Addition Reactions. In this final section, studies leading to the development of the first class of catalytic enantioselective strategies for prenyl conjugate additions will be detailed. At the core of these investigations was finding ways to overcome two problems. One challenge originated from the fact that highly activated allylmetal species often deliver product with low enantioselectivity. The other was that regioselectivity was difficult to control owing to a strong preference for γ-selective additions. As will be described, we were able to address these difficulties by the use of a hydroxy NHC-copper complex and 3,3-dimethyl allyl–B(pin) as a reagent. In the end, we were able to use acyclic as well as cyclic enoates as substrates. The results of DFT studies that provide insight regarding varying selectivity profiles with different chiral ligands will be discussed as well. / Thesis (PhD) — Boston College, 2020. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Chemistry.

<p> This thesis describes the development of the Wittig olefination reaction of stabilized, semistabilized allylic trialkylphosphorus ylides with various aldehydes to afford E olefins mainly (E>89%). Since the steric demand of trialkylphosphorus ylides was decreased, aldehydes achieved high E selectivity. On the other hand, predominant or exclusive formation of Z olefms was achieved by using allylic triphenylphosphorus ylides and aromatic aldehydes like benzylaldehyde, while the combination of allylic triphenylphosphorus ylides and such sterically hindered aldehydes as cyclohexanecarboxaldehyde led to E olefm formation upon ylide formation with LiHMDS. In the case of olefination reactions of aldehydes with dimethyl thiazole ylide, it was shown that among the aromatic aldehydes only 4-nitrobenzaldehyde reacted with this ylide and provided a pure E olefin product (41% yield). Dimethylmalonyltributylphosphorane (DMTP) reacted with aromatic aldehydes in toluene at 125 °C to give the corresponding alkenes. 4-Nitrobenzaldehyde· gave the alkene in a much higher yield (81%), followed by 4-chlorobenzaldehyde (31%). With benzaldehyde, the corresponding olefin was isolated in only 14% yield under these conditions. Clearly, this highly stabilized ylide only enters into reaction with electron deficient aldehydes. A possible approach to Z-a, P-unsaturated aldehydes was investigated through the olefination of an acetal-ylide followed by hydrolysis. However, E acetal olefins were in fact isolated from this 2'-(1,3-dioxolanyl)-triethylphosphorus ylide with aromatic aldehydes in good yields (62%-76%). This result is still mechanistically interesting in view of the chemoselective formation of such an ylide in the presence ofthree ethyl substituents on phosphorus. </p> <p> Class of flavonoids: Sakuranetin, Naringenin and (28)-7-methoxy-6hydroxyflavanone, have been isolated from the diseased bark of Prunus sp. The structures were elucidated based on the spectroscopic data. Locations of 4-keto, 5-0H and 7-methoxy were deduced from COSY and HMBC spectra. Such compounds are of interest for their potential antibiotic activity against vancomycin-resistant strains of microbes. </p> / Thesis / Master of Science (MSc)