1 |
Catalyzed Hydrogen Release from BH- and BNH-based Hydrogen Storage MaterialsMostajeran, Mehdi January 2017 (has links)
In order to reduce our ties to fossil-based energy and mitigate the undeniable impacts of climate change on the environment, remarkable efforts have been directed over the last 4 decades toward developing renewable energy sources such as solar, wind, geothermal, etc. For transportation applications biofuels, electricity and hydrogen all offer potential solutions although current usage is still largely linked to fossil fuels (bio-based ethanol-gasoline mixtures, power generation for battery recharging, and steam reforming for hydrogen production). While hydrogen offers the greatest potential in terms of energy density, its poor volumetric density (0.01 MJ/L at RT) requires costly compression and pressurized storage. When future technology finally allows for efficient hydrogen release from water splitting, we need to have optimal solutions in place for hydrogen storage. One promising solution is chemical hydrogen storage in which thermolysis of a chemical precursor affords a controlled hydrogen release that can then be reversed in an off-board regeneration step. With a focus on maximum gravimetric hydrogen storage, various BNH compounds have been shown to be promising chemical hydrogen storage precursors. In this Thesis we summarize the state of the art in B-N-H hydrogen storage compounds (Chapter 1) and then investigate several new chemical hydrogen storage solutions with a focus on portable power generation.
In the first project (Chapter 2) we sought to prepare a robust, base-metal borohydride hydrolysis catalyst for use in a custom hydrogen generator designed to use the reaction heat to help separate the borate spent fuel. Active ‘reverse opal’ layered double hydroxide (LDH) catalysts were prepared and tested. While the classical Ni-Mg-Al LDH released 3.4 equiv. of hydrogen at 50 °C in 150 minutes, the polystyrene templated Ni-Mg-Al catalyst released 4 equiv. of hydrogen with a higher initial rate under the same reaction conditions. The long-term objective of this project was to test these catalysts in fuel cells for underground mine forklifts with our industry collaborator (Kingston Process Metallurgy Inc.).
In the next three chapters, the synthesis and hydrogen release properties of ammine metal borohydrides [M(BH4)m(NH3)n, AMBs] were investigated. As promising hydrogen storage materials with high hydrogen content (10-15 wt%), AMBs can access lower hydrogen release temperatures resulting from the combination of protic (N-Hδ+) and hydridic (B-Hδ-) hydrogens. While AMBs also do not suffer from diborane formation that plagues thermolysis of metal borohydrides, hydrogen release is often accompanied by small concentrations of ammonia that deactivate the fuel cell catalyst. Our objective for this work was to identify base metal catalysts that could suppress ammonia formation by further reducing the energy barrier to H2 release.
In Chapter 3 our studies of the solution synthesis of AMB materials (Y, La, Zn, etc.) in coordinating solvents such as tetrahydrofuran (thf) and diethyl ether revealed the unexpected formation of ammonia-borane (H3NBH3, AB). It was shown that while the amounts of produced AB correlate with the Zhang electronegativity for the s- and p-block metals, ionic radius is a stronger determining factor for the transition metals. It was also observed that reducible metals such as Ti and V produce large amounts of AB while Zn produced the least. This knowledge was then used in Chapter 4 to prepare pure samples of the Y and La complexes, M(BH4)3(NH3)4 that were characterized by thermal analysis (TGA-MS), powder X-ray diffraction, FT-IR and 11B and 1H MAS NMR spectroscopy. Furthermore, a series of base-metal nanoparticle catalysts, prepared using a novel route from MCl2 and liquid hexylamine-borane, was shown to suppress ammonia formation from these Y and La AMBs. Immobilizing 5 wt.% of Co NPs on Y(BH4)3(NH3)4 and 5 wt.% of Fe NPs on La(BH4)3(NH3)4 resulted in reduction of ammonia release by three- and fourfold, respectively. In Chapter 5 the attempted solution synthesis of Zn(BH4)2(NH3)2 revealed complications due to preferred formation of MIZn(BH4)3 [instead of Zn(BH4)2] from the reaction of ZnCl2 and MIBH4 (MI= Li, Na, K). As a result, the mixed-metal AMB, KZn(BH4)3(NH3)n was prepared and characterized. Although the effects of both heterogeneous and homogeneous catalysts were not as pronounced as those for Y and La, using 5 wt.% FeNPs resulted in fourfold reduction in the amount of released ammonia which led to a purer hydrogen stream (98.9 mol%) compared to the uncatalyzed thermolysis (97.0 mol%).
Finally, in Chapter 6 our results are considered vs. the current state of the art and suggestions are made for further investigations.
|
2 |
Étude par RMN 1H de complexes paramagnétiques ammines de ruthénium(III) contenant des pyridinesChassé, Guillaume January 2001 (has links)
Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.
|
3 |
Ottimizzazione di pratiche enologiche per la riduzione di contaminanti biologici in vino / OPTIMIZATION OF OENOLOGICAL PRACTICES TO REDUCE BIOLOGICAL CONTAMINANTS IN WINEMONCALVO, ALESSANDRO 21 February 2013 (has links)
L’ocratossina e le ammine biogene sono due metaboliti biologici che possono essere ritrovati nei vini. Il primo di questi contaminanti è stato studiato recentemente per la sua elevata tossicità sebbene non sia rintracciabile frequentemente nei vini. Le ammine biogene sono presenti in ogni tipo di vino in differenti concentrazioni, oltretutto, alcune di loro, ad alte concentrazioni, possono causare reazioni allergiche.
Gli obiettivi di questo PhD riguardano tre differenti aspetti. Indagare metodi biologici di per la decontaminazione di ocratossina A durante la vinificazione; in particolare lo studio si è focalizzato sull’uso di un ceppo Lactobacillus plantarum utilizzato come starter malolattico. Valutare la presenza di Lactobacillus spp., isolati da mosto e vino, in grado di produrre ammine biogene, usando tecniche molecolari come la reazione a catena della polimerasi (PCR) per rilevare i geni codificanti gli enzimi responsabili della sintesi di questi composti. Testare la capacità di un L. plantarum di effettuare la malolattica effettuando l’inoculo in differenti fasi della vinificazione e valutare il trend delle ammine biogene già presenti nel mosto. / Two of the major biological metabolites present in wine are the ochratoxin and the biogenic amines. The first of these contaminants was studied in recent decades because of its toxicity in humans, although its presence is not frequent in wines. The biogenic amines are present in every types of wine in different concentration, and some of them, in high concentrations, can cause allergenic reactions in humans.
The objectives of this PhD regard three different aspects. Investigate the biological methods to reduce ochratoxin A in wine during winemaking; in particular the study is focused to use a Lactobacillus plantarum strain as malolactic starter. Investigate the presence of Lactobacillus spp., isolated from must and wine, able to produce the amines, using molecular techniques as polymerase chain reaction (PCR) to detect the genes that encode for the enzymes responsible of the synthesis of these compounds. Test the ability of a L. plantarum to perform MLF in relationship with inoculation time and assess the trend of biogenic amines already present in must.
|
Page generated in 0.0223 seconds