Spelling suggestions: "subject:"santanna"" "subject:"antananarivo""
1 |
Inflatable Parabolic Reflectors for Small Satellite CommunicationJanuary 2015 (has links)
abstract: CubeSats offer a compelling pathway towards lowering the cost of interplanetary exploration missions thanks to their low mass and volume. This has been possible due to miniaturization of electronics and sensors and increased efficiency of photovoltaics. Interplanetary communication using radio signals requires large parabolic antennas on the spacecraft and this often exceeds the total volume of CubeSat spacecraft. Mechanical deployable antennas have been proposed that would unfurl to form a large parabolic dish. These antennas much like an umbrella has many mechanical moving parts, are complex and are prone to jamming. An alternative are inflatables, due to their tenfold savings in mass, large surface area and very high packing efficiency of 20:1. The present work describes the process of designing and building inflatable parabolic reflectors for small satellite radio communications in the X band.
Tests show these inflatable reflectors to provide significantly higher gain characteristics as compared to conventional antennas. This would lead to much higher data rates from low earth orbits and would provide enabling communication capabilities for small satellites in deeper space. This technology is critical to lowering costs of small satellites while enhancing their capabilities.
Principle design challenges with inflatable membranes are maintaining accurate desired shape, reliable deployment mechanism and outer space environment protection. The present work tackles each of the mentioned challenges and provides an
understanding towards future work. In the course of our experimentation we have been able to address these challenges using building techniques that evolved out of a matured understanding of the inflation process.
Our design is based on low cost chemical sublimates as inflation substances that use a simple mechanism for inflation. To improve the reliability of the inflated shape, we use UV radiation hardened polymer support structures. The novelty of the design lies in its simplicity, low cost and high reliability. The design and development work provides an understanding towards extending these concepts to much larger deployable structures such as solar sails, inflatable truss structures for orbit servicing and large surface area inflatables for deceleration from hypersonic speeds when re-entering the atmosphere. / Dissertation/Thesis / Masters Thesis Mechanical Engineering 2015
|
2 |
Uma antena de banda dupla para RFID / A dual band antenna for RFIDGrilo, Marcus, 1987- 19 August 2018 (has links)
Orientadores: Francisco José Arnold, Leonardo Lorenzo Bravo Roger / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Tecnologia / Made available in DSpace on 2018-08-19T21:46:41Z (GMT). No. of bitstreams: 1
Grilo_Marcus_M.pdf: 4359440 bytes, checksum: 6cae50e622550385b3c928f7055ed0fe (MD5)
Previous issue date: 2012 / Resumo: Este trabalho apresenta a análise, o projeto e a construção de uma antena de banda dupla para as faixas de frequências de 915MHz e 2,45GHz, para aplicação em sistemas RFID. A antena é impressa em um substrato de fibra de vidro e possui estrutura dipolar. Os elementos radiadores estão em faces opostas do substrato o que resulta em baixa capacitância do dispositivo. As simulações computacionais, realizadas no programa HFSS, apresentaram boa concordância com os resultados experimentais. Os resultados mostraram importantes vantagens conseguidas com a antena desenvolvida, tais como estrutura simples e independência e facilidade de sintonia. Além disso, os parâmetros característicos (perda de retorno e ganho) de desempenho da antena são bastante satisfatórios. Propostas para trabalhos futuros também são apresentadas / Abstract: This paper presents the analysis, design and construction of a dual band antenna for the frequency bands 915 MHz and 2.45 GHz, for use in RFID systems. The antenna is printed on a substrate of fiberglass and has a dipolar structure. The radiator elements are on opposite faces of the substrate which results in low capacitance of the device. Computer simulations, carried out in the program HFSS, in good agreement with experimental results. The results showed important advantages achieved with the antenna developed, such as simple structure, independence and ease of tuning. Moreover, the characteristic parameters (return loss and gain) antenna performance are quite satisfactory. Proposals for future work are also presented / Mestrado / Tecnologia e Inovação / Mestre em Tecnologia
|
3 |
Bezdrátový přenos energie uvnitř automobilu / In-car wireless power transferCupal, Miroslav January 2015 (has links)
The thesis is focused on the design of antennas for wireless power transfer inside a car near the frequency of 8 GHz. In the last century, a number of scientists dealt with wireless transmission of energy with high power and long distances. Currently, attention is given to methods capable of transmitting energy with good effectively over a distance of meters for charging mobile devices, wireless sensors and other devices with low power consumption.
|
Page generated in 0.0477 seconds