Newly built Wellness hotel. The building is partially basement. The building has three parts. The central part is made of reinforced concrete skeleton and has five aboveground floors. This part serves as the main entrance hall and staircase. The side tracts have four aboveground floors and their support system is a transverse wall, brick, from the system Porotherm. In the basement there is a swimming pool and hotel facilities. There is located a restaurant too. On the second floor there are rooms, a gym and services. On the top floor there are only hotel rooms. The building is based on thecontinous footings. Roofing is made arched trusses.

Master's thesis addresses the design and assessment of the load bearing structure of the shopping gallery. The building is designed as a three-storey rectangular plan with a flat roof. The structure is composed of steel frames and composite steel and concrete slabs. There are proposed two possible solutions - variant with a flat roof and direct central gallery, a reinforced rigid steel frames and a variant with a cupola roofed circular inner atrium, solidified with rods.

This master‘s thesis deals with the design documentation Fit4You sports center. The new building is located in the district of the City of Brno in the cadastral Brno – Líšeň. The building is designed as a reinforced concrete skeleton system with ceramic masonry infill with two floors. Part of the building with the sports hall is roofed with arched trusses made of laminated wood. The second part of the building with facilities for the hall is roofed with a flat floor.

The construction of the concourse is designed from steel.Construction was designed in 2 variants.The construction of the hall is radially curved in plan view with a circular sector on the longitudinal side.Roof structure consists of eight trusses at an axial distance of 9 m.Tracks are arched truss designed as a parallel.Trusses are designed to span 40m.Maximum ground clearance hall at the top is 14 meters.Letištní hala byla řešena v programu Scia Engineer 2014 a součástí je i výkresová dokumentace.

The diploma thesis deals with the study of sports hall designated for volleyball. The volleyball hall is steel construction with arched truss with span of 30 meters. Sport`s background, roofed by mono-pitch plus saddle roof, is part of south-easterly side of the hall. The hall is situated in moderate slope terrain in cadastre unit Zbraslav na Moravě. Designed hall has rectangular plan (48 x 30 m) to this belongs also the foyer and the clubroom. Clear height of the hall is 15 m. Object consists of columnal structural system with steel columns that support arched truss. Center to center spacing of main truss is 8 m. The object is set up on reinforced concrete foundation pad. Column foot is sticked in foundation pad and column head is pinned. Roof’s and wall’s bracings provide stability of the hall. Curtain walling and roof cover is made of sandwich panels Kingspan. Insolation and daylighting is guaranteed by plastic windows set in the wall.

The content of the thesis is a proposal of steel load-bearing structure (carrying structure of a steel) bridge of the span of 31+74+31m with the bottom bridge deck taking over the second-class road in the territory of Olomouc city. The bridge deck is created by composite steel-concrete slab with crossbars. The solution was focused on using arched construction in the middle of the bridge with different tilt of arches to the horizontal central axis of the bridge. Under the term of the solution four alternatives have been calculated. The most optimal solution was selected and processed in detail. The calculations were made in compliance with the Czech technical norms ČSN EN.

The subject of the Diploma thesis is a design wooden structures of a multipurpose sport building in Šumperk. The floor plan measurements of the building are 45,0 x 48,0 m with the maximum height 15,0 m. The solution is choosen on the basis of two variants. The structures is designed with respect to ultimate and serviceability limit states. The multipurpose sport building is consist of 13 main truss centre to centre spacing 4,0m. The main structural system is design as the three-hinged arched structure made of solid timber and in the second variant as the arched structure made of glue laminated timber. The spatial rigidity of the structure is secured of diagonal bracing. The roofing is carried by rafter which are safed by purlin and then by upper chord. The steel columns are design as a part of gable wall. The project was carried out in the scia Engineer 2014 software. Some of the particular elements both variants were checked and designed by manualy calculating. The thesis includes structural design report, joints structures, drawings and production drawing the element of the three-hinged arched structure.

Diploma´s thesis is about timber structure of footbridge for pedestrians and cyclists over the Slatina river in the city of Zvolen as cast of alternatives. In the first alternative is footbridge designed as a simple arched beam, made of glued laminated timber. Footbridge is also designed with semi through bridge deck, made of structural timber. The second alternative is designed as a tied arch structure. At this alternative is the bridge deck left unchanged(material, sizes of members). Both alternatives are attested by currents standarts.

The subject of the diploma thesis is the design and structural analysis of an exhibition hall. The building is located in Brno city. The dimensions of a floor plan are 121,8 m x 66,5 m, the height is 17,75 m. The load-bearing structure consists of arched truss girders, which are pin-supported by fixed columns. The distance between main trusses is 8,7 m. The supporting part of the roof deck consists of solid-purlins. Spatial rigidity of the structure is ensured by cross bracing and longitudinal bracing. All structural members are made of rolled steel profiles and are designed according to current ČSN EN standards. Steel S355 is used as the construction material. This thesis consists of structural design report of main load bearing elements including connections design and drawings.

The aim of diploma thesis is to design steel roof structure of minimum dimensions 45 m x 50 m and minimum height 12 m. The plan of the building design has dimensions of 52,14 m x 70, 00 m and height is 18,68 m. The roofing was design as 3D truss girders with two lower chords and one upper chord. The shape of 3D truss girder consists of three circular arcs of radius 69,88m, 12,43 m and 33,45 m. Between main girders is 3D bracing. The structure is pin-supported.