1 |
Enhancement of Positioning and Attitude Estimation Using Raw GPS Data in an Extended Kalman FilterCarlsson, Jesper January 2014 (has links)
A Global Positioning System (GPS) can be used to estimate an objects position,given that the object has a GPS antenna. However, the system requires informationfrom at least four independent satellites in order to be able to give a positionestimate. If two GPS antennas and a carrier-phase GPS measurement unit is usedan estimate of the objects heading can be calculated by determine the baselinebetween the two antennas. The method is called GPS Attitude Determination(GPSAD) and requires that an Integer Ambiguity Problem (IAP) is solved. Thismethod is cheaper than more traditional methods to calculate the heading butis dependent on undisturbed GPS-reception. Through support from an InertialMeasurement Unit (IMU), containing accelerometers and gyroscopes, the systemcan be enhanced. In Thorstenson [2012] data from GPS, GPSAD and IMU wasintegrated in an Extended Kalman Filter (EKF) to enhance the performance. Thisthesis is an extension on Thorstensons work and is divided into two separate problems:enhancement of positioning when less than four satellites are available andthe possibility to integrate the EKF with the search of the correct integers for theIAP in order to enhance the estimation of attitude. For both problems an implementationhas been made and the performance has been enhanced for simulateddata. For the first problem it has been possible to enhance the performance onreal data while that has not been possible for the second problem. A number ofproposals is given on how to enhance the performance for the second problemusing real data.
|
2 |
High Performance Attitude Determination and Control for Nanosatellite MissionsJohnston-Lemke, Bryan 08 December 2011 (has links)
Small satellites are growing in popularity because they offer an effective option that enables missions otherwise too schedule or cost limited. However, many possible missions require improved platform capabilities without sacrificing the cost effective nature of small satellites before they become viable. Described is the development and validation of high performance attitude determination and control for nanosatellite missions. Considered are astronomy missions, requiring very fine pointing stability, and formation flying missions requiring rapid manoeuvring while maintaining antenna coverage towards secondary pointing targets. It will be shown that power and volume limited nanosatellites are capable of this level of attitude performance by leveraging the techniques normally reserved for larger spacecraft. Discussed are attitude state estimation techniques and control laws developed for the BRITE stellar photometry constellation and CanX-4 and CanX-5 formation flying mission, along with the challenges associated with implementing and validating these designs for real space missions.
|
3 |
High Performance Attitude Determination and Control for Nanosatellite MissionsJohnston-Lemke, Bryan 08 December 2011 (has links)
Small satellites are growing in popularity because they offer an effective option that enables missions otherwise too schedule or cost limited. However, many possible missions require improved platform capabilities without sacrificing the cost effective nature of small satellites before they become viable. Described is the development and validation of high performance attitude determination and control for nanosatellite missions. Considered are astronomy missions, requiring very fine pointing stability, and formation flying missions requiring rapid manoeuvring while maintaining antenna coverage towards secondary pointing targets. It will be shown that power and volume limited nanosatellites are capable of this level of attitude performance by leveraging the techniques normally reserved for larger spacecraft. Discussed are attitude state estimation techniques and control laws developed for the BRITE stellar photometry constellation and CanX-4 and CanX-5 formation flying mission, along with the challenges associated with implementing and validating these designs for real space missions.
|
4 |
Modeling, image processing and attitude estimation of high speed star sensorsKatake, Anup Bharat 15 May 2009 (has links)
Attitude estimation and angular velocity estimation are the most critical components
of a spacecraft's guidance, navigation and control. Usually, an array of tightlycoupled
sensors (star trackers, gyroscopes, sun sensors, magnetometers) is used to
estimate these quantities. The cost (financial, mass, power, time, human resources)
for the integration of these separate sub-systems is a major deterrent towards realizing
the goal of smaller, cheaper and faster to launch spacecrafts/satellites. In this
work, we present a novel stellar imaging system that is capable of estimating attitude
and angular velocities at true update rates of greater than 100Hz, thereby eliminating
the need for a separate star tracker and gyroscope sub-systems.
High image acquisition rates necessitate short integration times and large optical
apertures, thereby adding mass and volume to the sensor. The proposed high
speed sensor overcomes these difficulties by employing light amplification technologies
coupled with fiber optics. To better understand the performance of the sensor, an
electro-optical model of the sensor system is developed which is then used to design
a high-fidelity night sky image simulator. Novel star position estimation algorithms
based on a two-dimensional Gaussian fitting to the star pixel intensity profiles are
then presented. These algorithms are non-iterative, perform local background estimation
in the vicinity of the star and lead to significant improvements in the star
centroid determination. Further, a new attitude determination algorithm is developed that uses the inter-star angles of the identified stars as constraints to recompute
the body measured vectors and provide a higher accuracy estimate of the attitude
as compared to existing methods. The spectral response of the sensor is then used
to develop a star catalog generation method that results in a compact on-board star
catalog. Finally, the use of a fiber optic faceplate is proposed as an additional means
of stray light mitigation for the system. This dissertation serves to validate the conceptual
design of the high update rate star sensor through analysis, hardware design,
algorithm development and experimental testing.
|
5 |
GPS-based attitude determinationBejeryd, Johan January 2007 (has links)
<p>Inertial sensors and magnetometers are often used for attitude determination of moving platforms. This thesis treats an alternative method; GPS-based attitude determination. By using several GPS-antennas, and with carrier phase measurements determining the relative distance between them, the attitude can be calculated.</p><p>Algorithms have been implemented in Matlab and tested on real data. Two commercial GPS-based attitude determination systems have also been tested on a mobile platform and compared to a navigation grade Inertial Navigation System (INS). The results from the tests show that GPS-based attitude determination works well in open areas, but would require support from additional sensors in urban and forest environments.</p>
|
6 |
A star tracker design for CubeSatsMcBryde, Christopher Ryan 12 June 2012 (has links)
This research outlines a low-cost, low-power, arc-minute accurate star tracker that is designed for use on a CubeSat. The device is being developed at the University of Texas at Austin for use on two different 3-unit CubeSat missions. The hardware consists of commercial off-the-shelf parts designed for use in industrial machine vision systems and employs a 1024x768 grey-scale charge coupled device (CCD) sensor. The software includes the three standard steps in star tracking: centroiding, star identification, and attitude determination. Centroiding algorithms were developed in-house. The star identification code was adapted from the voting method developed by Kolomenkin, et al. Attitude determination was performed using Markley's singular value decomposition method. The star tracker was then tested with internal simulated star-fields. The resulting accuracy was less than an arcminute. It was concluded that this system is a viable option for CubeSats looking to improve their attitude determination. On-orbit demonstration of the system is planned when the star tracker flies on the planned CubeSat missions in 2013 or later. Further testing with external simulated star fields and night sky tests are also planned. / text
|
7 |
GPS-based attitude determinationBejeryd, Johan January 2007 (has links)
Inertial sensors and magnetometers are often used for attitude determination of moving platforms. This thesis treats an alternative method; GPS-based attitude determination. By using several GPS-antennas, and with carrier phase measurements determining the relative distance between them, the attitude can be calculated. Algorithms have been implemented in Matlab and tested on real data. Two commercial GPS-based attitude determination systems have also been tested on a mobile platform and compared to a navigation grade Inertial Navigation System (INS). The results from the tests show that GPS-based attitude determination works well in open areas, but would require support from additional sensors in urban and forest environments.
|
8 |
Attitude Determination and Control Hardware Development for Small SatellitesFournier, Marc 24 August 2011 (has links)
The development of a small spacecraft attitude determination and control subsystem is described. This subsystem is part of The Space Flight Laboratory's Generic Nanosatellite Bus. With a 20cm3 body, the bus has an attitude determination and control subsystem capable of full three-axis stabilization and control enabling more advanced missions previously only possible with bulkier and more power-consuming attitude control hardware. Specific contributions to the Space Flight Lab's attitude control hardware are emphasised. Particularly, the full development of a 32g three-axis nanosatellite rate sensing unit is described. This includes embedded software development, skew calibration, hardware modeling and qualification testing for the unit. Development work on a three-axis boom-mounted magnetometer is also detailed. A full hardware design is also described for a new microsatellite-sized rate sensor. Larger and more powerful than the nanosatellite rate sensors, the design ensures a low noise, low drift architecture to improve attitude determination on future microsatellite missions.
|
9 |
Attitude Dependent De-orbit Lifetime Analysis of an Aerodynamic Drag Sail Demonstration Spacecraft and Detailed Thermal Subsystem Design for a Polar Orbiting Communications NanosatelliteTarantini, Vincent 27 November 2012 (has links)
Contributions to two missions are presented. The first is a demonstration mission called CanX-7 that uses a 4 square metre drag sail to de-orbit a 3.5 kg satellite. In order to estimate the effectiveness of the drag sail, a novel method is developed that takes into account the time-varying nature of the projected drag area. The Space Flight Laboratory designed drag sail is shown to be sufficient to de-orbit the CanX-7 spacecraft within the 25 year requirement.
The Antarctic Broadband demonstrator spacecraft is a 20 cm cubical nanosatellite that will demonstrate the feasibility of a Ka-band link between the research community in Antarctica and stakeholders in Australia. In support of this mission, a passive thermal control subsystem is designed that will keep all the components within their operational temperature limits at all times throughout the mission.
|
10 |
Attitude Determination and Control Hardware Development for Small SatellitesFournier, Marc 24 August 2011 (has links)
The development of a small spacecraft attitude determination and control subsystem is described. This subsystem is part of The Space Flight Laboratory's Generic Nanosatellite Bus. With a 20cm3 body, the bus has an attitude determination and control subsystem capable of full three-axis stabilization and control enabling more advanced missions previously only possible with bulkier and more power-consuming attitude control hardware. Specific contributions to the Space Flight Lab's attitude control hardware are emphasised. Particularly, the full development of a 32g three-axis nanosatellite rate sensing unit is described. This includes embedded software development, skew calibration, hardware modeling and qualification testing for the unit. Development work on a three-axis boom-mounted magnetometer is also detailed. A full hardware design is also described for a new microsatellite-sized rate sensor. Larger and more powerful than the nanosatellite rate sensors, the design ensures a low noise, low drift architecture to improve attitude determination on future microsatellite missions.
|
Page generated in 0.1413 seconds