Spelling suggestions: "subject:"bathymetrie"" "subject:"batymetri""
1 |
Batymetrie VD Němčice / The Bathymetry of Němčice reservoirPrchal, Jan January 2016 (has links)
Bathymetric measurements are important for mapping relief of current reservoirs and streams. Due to the lack of similar measurements in the Czech Republic is presented diploma thesis focused on the implementation of the first bathymetric survey on the water reservoir located on the basin Němčice - Sedlický stream. As a part of the work was done bathymetric data collection device River Surveyor M9 data processing interpolation procedures and evaluate the mutual comparison of estimation results. It was also evaluated the effect of the resolution to the retention volume of the tank and its sedimentations regime. Based on the evaluation of the measurement is based on a minimum average error method Universal Kriging. Processed data were measured during the year 2015. The result of the work can serve as a guide for subsequent measurements and estimates bathymetric data on a similar small reservoirs in the catchment areas of the Czech Republic.
|
2 |
Změny reliéfu dna a objemu VD Fojtka vlivem zanášení / Changes in volume of water reservoir Fojtka due to sediment fluxVlasák, Tomáš January 2016 (has links)
Sedimentation in dams is a natural process depending on various factors over a period of time. Sediments influence both total capacity of dam's surface and also relief of bottom.
This thesis deals with amount of sediment in Fojtka dam and with change of its bottom's relief in past 109 years since its establishment. There was conducted measuring using an echosounder in a boat. Final output derived from this experiment was a point layer including 5500 point items. Subsequently there was executed a measurement of dam's shoreline using GPS device. Data were processed in ArcGIS software, then reduced and edited to be used for interpolation tools of ArcToolbox. In order to select the most accurate interpolation method, there were created validation data, which were compared with interpolated data. The best results have been achieved by interpolation method Kriging and TIN in resolution 0.5 m.
Original maps were vectorized for comparison with current condition. Created validation data were compared in order to show accuracy of particular interpolation. The most useful evaluated method for gained data was TIN method in resolution 0.5 m. TIN method was applied in both data sets for 2D and 3D bottom relief visualization and also for calculation of actual water volume and area of water surface of the dam.
Difference in bottom's relief of Fojtka dam showed capacity reduction about 6,7 % and reduction of water surface area about 3,2 %. Regular extracting of sediment in reservoir located above the dam causes this relatively small silting ratio.
|
3 |
Možnosti využití nových metod batymetrie vodních nádrží / Possibilities of use of new bathymetry method of water reservoirsKundratová, Františka January 2017 (has links)
It is essential to measure water depths of rivers, water reservoirs, ponds and lakes from various reasons like hydrologic modeling, monitoring of biotopes, monitoring of sediments or archeologic researches. Hence, the bathymetry techniques for measurements of shallow waters are still evolving. The goal is to find the best method allowing fast and economic mapping of large-scale areas and providing high-resolution data. Currently, the most common method in Czech Republic is probably depth measurement by an ADCP devices, which is a very accurate method, but still time-consuming. On the other hand, airborne laser scanning with wavelength of 532 nm (green laser pulse) has a great potential for shallow water mapping.
This work is focused on the possibilities of use of the airborne laser scanning for bathymetry of rivers and water reservoirs in conditions typical for Czech Republic. The methods of obtaining the bathymetric data are discussed in theoretical part, as well as principles of its operation. In the practical part, two study areas (a part of Vltava river and a Hracholusky dam) were scanned using the laser scanner Riegl VQ-880- G. Digital terrain model (DEM) was created from acquired data of the two study areas. After that the DEMs were compared with DEMs which were created from sonar data. The results of comparison are presented. The aim of this work is to assess the ability of airborne laser bathymetry in conditions typical for Czech Republic and verify the accuracy of this method. This method saves time and economic costs and it has great potential to be usable for future research.
|
4 |
Hydrologický režim vybraných jezer Vysokých Tater / Hydrological regime of selected lakes in the High Tatra Mts.Sankotová, Tereza January 2015 (has links)
This diploma thesis deals with morphometric analysis and hydrological regime of Skalnaté pleso lake and Hincové Oká lakes, especially the lake level fluctuation, during the period 2011 - 2014. One of the tasks was the bathymetric mapping of observed locations. For Hincové Oká lakes was it the first mapping of bathymetry at all. The hydrological regime and lake level fluctuation regime of observed locations shows interesting differences from the other Tatra lakes whose hydrological regime is controlled by precipitation amounts. The annual culmination of Hincové Oká lakes (the largest lake) is shifted into the spring caused by melting snowpack. When there is no rainfall for a couple of days Skalnaté pleso lake often dries up, even during summer months, when levels of most Tatra lakes reach their maximum values. However summer drying is shortterm. Lake level fluctuation regime is very dynamic. After a strong rainfall event its level rises very steeply, up to 0,14 m per hour. Powered by TCPDF (www.tcpdf.org)
|
Page generated in 0.217 seconds