Dagens samhälle går mot en livsstil som präglas av möjligheter att göra allt fler hållbara val. För att minska koldioxidavtrycket krävs en fortsatt stabil omställning till förnyelsebara energikällor, i vilken vindkraften har en betydande roll. Det här projektet syftar till att, under statiska förhållanden, studera lagren i vindkraftverkens pitchsystem och deras prestation, att undersöka lastfördelningen mellan rullkropparna i lagren, samt att bestämma kontaktvillkoren mellan ytterring och rullkropp. Genom att anta kvasi-statisk belastning på rotorbladet under en rotation har lagrens lastfördelning beräknats. En förenklad modell genom finita elementmetoden har tagits fram där rullkropparnas styvhet modelleras på speciella kopplingselement, vilket förbrukar mindre beräkningstid men fortfarande ger ett korrekt resultat. Den största anledningen till utmattningsbrott hos lagren är lastens cykliska karaktär. Resultatet av beräkningen tyder på en ojämn fördelad belastning mellan rullkropparna där vissa rullkroppar ständigt upptar mer last än övriga. Dessutom har läget för maximala kontakttryck på rullkropparnas yta och hur det ändras med tiden beräknats. Lagret i vindkraftverkets pitchsystem kan tyckas relativt obetydligt jämfört med övriga komponenter, men en korrekt funktion av dessa är väsentlig för att uppnå en säker drift av vindkraftverken. Resultatet av denna studie belyser behovet av en alternativ lösning som är effektivare och optimerad för denna applikation. / The world today is heading towards a more sustainable lifestyle in every aspect ranging from the clothes worn, transportation and even energy generation. The change towards lowering the carbon footprint is a slow but steady process, in which the wind industry play a major role.The project’s aim is to study the behavior of the pitch bearing under constant wind load conditions, investigate the load distribution between the rolling elements in the bearing and finally to determine the contact conditions that exist between the raceways and the rollers. The bearing load is calculated by assuming a quasi-static loading as the blade completes one revolution. A simplified finite element model is then built where the stiffness of the rollers is modeled onto special connector elements, which consumes less computational resource and still delivers an accurate result.The cyclic nature of loading is one of the major source of fatigue failure of these bearings. The load distribution data suggests uneven loading of the rolling elements and how certain rollers in a particular position are always more heavily loaded than the others. The loading information is also used to map the position of maximum contact pressure on to the surface of the rollers and how it changes with time.At the first glance, the pitch bearing might appear relatively insignificant compared to rest of the components, but a proper functioning of these bearings is essential for safe operation of the WT (Wind Turbine). The results of this work have thrown light into the proficiency of these bearings and the need for an alternate solution that is more efficient and better optimized for this application.

This diploma thesis is dedicated to mechnical desing, fabrication and assembly of experimental bearing testing rig. First part of the document contains research of current knowlege in the field of bearing testing and desings of currently used machines. In second part is conception of the testing rig described. Third part contains description of design variations that were designed. In Discussion is comented choices of final variants. Last part is dedicated to functional verification of the whole testing rig by first series of the tests.

- Allgemeine Problematik bei der FEM-Simulation von Lagern/Gelenken - Modellierungstechniken in MECHANICA wie z.B. Kontakt-Analysen, Balkenspinnen, gewichtete Verbindungen, orthotropes Material, etc. - Vergleich dieser Techniken und Diskussion der Vor- und Nachteile anhand eines Gleitlagers - Empfehlungen und Regeln

Increasing ecological and economic pressures, as well as increased technical requirements, have given rise to the need for research into alternative wear layers for hydrodynamic plain bearings. Previous investigations have tested and researched the bonded coating GL92. It has been possible to demonstrate that the bonded coating (plastic base) is a viable alternative to a conventional white metal alloy. However, this coating was not able to address all the issues experienced by industrial users, for example the behaviour of the system (changes to operating properties) during penetration of particles, or behaviour in a mixed friction area. The literature has not – or not sufficiently – answered the questions relating to damage patterns and damage tolerance. Therefore, regardless of the proven benefits, industrial use of this coating is currently not possible or is connected with significant risks. In the study, tests were carried out in the mixed friction area (start-stop testing, emergency testing without oil, insufficient lubrication tests) as well as in the hydrodynamic area. The comparative tests were performed on different wear layer materials. This paper demonstrates and discusses the results for both a conventional white metal alloy bearing and for the bearing with bonded coating (GL92). Depending on the operating point, the bearing systems exhibit significant differences at the maximum bearing load, lubricating film pressure distribution and maximum bearing temperature. The investigation has proven that GL92 is a technically useful alternative to conventional wear layers.

This diploma thesis is devoted to problems of crankshaft plain bearings at five-cylinder in-line engine. Document body describes behaviour of plain bearings under various working conditions. To needs of the hydrodynamic bearings simulations is created the cranktrain virtual model. Next part of hereof document deals with problems of bearing shell design. Is created survey of the bearing materials and shortly described technological processing of shell bearing. To understand complicated problems hydrodynamic lubrication is derived Reynolds differential equation and foreshadowed succession calculation dynamically loaded bearings. In final parts of this thesis are presented most interesting results obtained from computational analysis.

- Allgemeine Problematik bei der FEM-Simulation von Lagern/Gelenken - Modellierungstechniken in MECHANICA wie z.B. Kontakt-Analysen, Balkenspinnen, gewichtete Verbindungen, orthotropes Material, etc. - Vergleich dieser Techniken und Diskussion der Vor- und Nachteile anhand eines Gleitlagers - Empfehlungen und Regeln