This diploma thesis is aimed on solution of a three-storey object for residential and commercial purposes of a university. In the ground floor there is canteen with canteen kitchen, café, shops and fitness. The first and second floors are designed as an accommodation for students with different types of room layouts. Reinforced concrete skeleton was chosen as a load-bearing system of the building and acoustic masonry is used as an infill material. The roof is designed as a green flat roof with extensive type of flora. The object is founded on piles.

The theoretical part of this master’s thesis contain comparing the methods of endurance hydraulic bound mixtures of concrete recycles against influence of water and freeze in Czech republic and some other states of The European Union. The practical part is dedicated about laboratory testing concrete recycles with mixtures of binders and its endurance against the water and freeze cycles in Czech republic. In made rollers is compared the strength in pure compression with the strength in pure compression after freezing cycles. From the results of the exams is considered about suitability of using these hydraulic bound mixtures to road construction depending on the kind of use binder, amount of the binder and water. Results of this thesis will be used to revision of national postscript of technological norm ČSN 73 6124-1.

In the diploma thesis “ Prestressed bridge No. 207 over the expressway R2 in Slovakia” three variants of solution of bridging are developed. The aim of diploma thesis is evaluation of the proposed options and implementation of detailed design of the supporting structure selected variant. The thesis includes consideration of state of construction. Option chamber bridge with inclined walls on three fields were chosen for detailed static analysis. This post-tensioned structure is assessed in accordance with applicable European standards. The analysis of the construction is performed by Scia Engineer 2013 software system. In addition, the ceiling structure is assessed for pushing through. Drawing and visualization is a part of diploma thesis.

The subject of this diploma thesis is design of arch bridge across the highway. Has been elected self-anchored structure with span of arch 60 m and trapezoid bridge deck from prestressed concrete. The load effects is calculated by software Scia Engineer including time dependent analysis. The supporting structure is assessed for the ultimate limit state and serviceability limit state. Static assessment is done by hand calculation according to CSN EN 1992-2. Part of the thesis is drawing and visualization of the bridge.

This thesis deals with deterioration observed in cement-concrete cover (CBK) for three selected road sections of highways in the Czech Republic. The main objective was to determine whether concrete failure arose due to alkali-silica reaction, or other mechanism. The deterioration of concrete failure was observed in the macroscopic and microscopic scale. The mostly macroscopically observed deterioration of the concrete were cracks breaking the surface and inner parts of concrete. In micro- scale the microcracks and alcali-silica gels were observed. The CBK deterioration was quantitatively determined by three main parameters: specific length of microcracks on the CBK surface, specific length of microcracks in the drill cores and volume of alcali-silica gels and microcracks in thin sections. According to these indicators it was possible to distinguish two different types of CBK deteriorations. (1) Degradation mainly associated by alkali-silica reaction (observed on highways D11 - Vrbová Lhota and D1) and (2) degradation connected with another mechanism (cycles of freezing and thawing, mechanical degradation) was observed on the highway D5.

Master´s thesis describes the design and static calculating of selected elements of prefabricated reinforced concrete hall with bulit-in office, elaboration of basic drawings of the project documentation, shape and reinforcemenet drawings of these selected structural prefabricated elements. The work also includes technical report, details of selected element´s contacts, drawing of plates and study of the behavior of reinforced buildings. Calculation was performed by using a computer program AxisVm, Microsoft Excel a IDEA StatiCa

The diploma thesis deals with superstructure of apartment building in brno, which is located in a row house construction. The goal of the diploma thesis is to design new supporting structures and minimize the load from these construction because of low reservs in the load capacity of the existing supporting walls. the thesis contains a technical report, analysis of statics, drawing documentation and visualization. The internal forces were executed by software scia engineer.

This diploma thesis deals with the issue of using fine powder of concrete recyclate. In this thesis, the theoretical expectations of milling are summarized as well as high energy milling. Afterwards professional articles, in which fine powder of concrete recyclate is successfully activated, are described and commented on. In the experimental part, there are 11 recipes of cement mortar and 3 recipes of concrete mixed. The benefit of using fine powder of concrete recyclate as a possible substitute for part of the cement is evaluated.

The final thesis is focused on design of valley bridging on I/38 road at the Havlickuv Brod bypass. The thesis contains study of the bridging area. For detailed assessment was chosen, from three variants, a two-beam cross-section girder of 4 spans. Load-bearing structure is designed as cast-in-place, post-tensioned, concreted at fixed falsework without phased construction. The serviceability limit state and the ultimate limit state were assessed. The thesis contains, apart from structural design, drawings and visualizations of the bridge.

Předmětem této diplomové práce je návrh a projektová dokumentace pětipodlažní multifunkční budovy se 2 suterénními podlažími pro parkování pro 52 aut. První 2 patra jsou veřejná - k pronájmu je 23 samostatných prostor. Horní 3 podlaží obsahují 18 bytů a mají samostatné vchody se dvěma schodišti a 2 výtahy. Budova má dvě úrovně střechy a obě jsou pochozí s malým parkem a vegetací. Budova se nachází v hlavním městě Slovenska, Bratislavě, na Obchodní ulici. Záměrem je nahradit dvě staré budovy ve velmi špatném stavu. Z architektonického hlediska má tato budova zapadat do historického vzhledu ulice úpravou tvaru oken a materiálů a zároveň působit mírně moderně. Z konstrukčního hlediska má budova rámové nosné konstrukce z betonových nosníků sloupů a obousměrně vyztužených betonových desek vyplněných dřevěnými konstrukcemi a lehké sádrokartonové příčky.