Putting on or taking off clothes helps the body to stay within the comfortable temperature range (toavoid shivering or sweating) at different activity levels and ambient conditions. Clothes with built-inthermo-regulating properties would mean maintained comfort without putting on or taking off clothesthat frequently. Integration of phase change materials (PCMs) in clothes is one way of achievingthermo-regulating properties. When the body temperature goes up, the PCM melts and absorbs theheat from the body in the form of latent heat (cooling effect). When the temperature drops, the PCMcrystallizes and the stored heat is released again (warming effect).Research on thermo regulating fibres of the bi-component type containing PCM in the core has beenconducted at Swerea IVF in Mölndal, Sweden, for some time. It has been found that high molecularweight HDPE is a suitable viscosity modifier for hydrocarbon waxes used as PCM. The preparation ofcore materials has so far been done in a batch wise fashion in the way that molten wax has beensoaked into pelletized HDPE at around 180°C during prolonged times followed by melt compoundingin a Brabender batch kneader (0.3 kg per batch). Besides being very impractical for larger productionvolumes the method involves long residence times at high temperatures which may induce thermaldegradation reactions. The objective of the present diploma (master’s thesis) work was to develop acontinuous mixing method to produce PCM/HDPE blends and to test the resulting material in bicomponentfibers with a Nylon (PA6) sheath and to characterize the resulting fiber properties in termsof strength and latent heat.It was proven possible to compound HDPE with large amounts (70%) of octadecane (PCM) on aBrabender twin screw extruder. HDPE was metered to the extruder hoper by means of a screw feederand wax was continuously fed to the hoper in the liquid state by means of a heated membrane pump.To facilitate mixing HDPE in form of powder instead of pellets was used. The extruded threads weresolidified in a water bath followed by granulation. Bi-component fibers were successfully producedfrom such materials. Fibers containing 15 to 42% Octadecane were produced showing heat of fusionsin the range 26 to 86 J/g and tenacities in the range 33 to 16 cN/tex. The heat of fusion of the fiberscompares favorable with existing commercial products showing values in the range 5-15 J/g (acrylicand cellulosic fibres containing microencapsulated hydrocarbon waxes). The peak melting point ofoctadecane measured by DSC was found to be depressed some 4-5°C in the fibers compared to pureoctadecane (28°C). Such a melting point depression is important to consider when choosing type ofhydrocarbon wax. / Program: Magisterutbildning i textilteknologi