1 |
Automatický kotel na pelety / Automatic boiler for biomass pelletsSklenář, Vít January 2015 (has links)
The aim of this diploma thesis is the research of automatic boilers for biomass pellets and their burners, design of automatic boiler for biomass pellets which include calculation part and drawing part and technical-economics assessment for building in the end. Thesis is divided into four main parts. The first part deals with general information about pellets, automatic boilers for pellets, burners and the standard for boiler. In the second part the pellet boiler is calculated. In the third part the automatic pellet boiler is designed. The fourth section compares three possible variants. Comparison is done for economics and the user.
|
2 |
Measurement of Self-Heating of Biomass Pellets using Isothermal CalorimetryLarsson, Ida January 2017 (has links)
Self-heating in storage facilities of biomass pellet can lead to spontaneous combustion. This has resulted in many fires over the years, causing both financial and environmental losses. In order to assess the risk for spontaneous combustion of biomass pellets during storage, it is important to know how prone the fuel is to self-heating, i.e. to determine its reactivity. This thesis presents experimental work performed to develop a sensitive screening test procedure for biomass pellets, using isothermal calorimetry for direct measurement of the heat production rate. This method can be used to compare the reactivity of different biomass pellets. This could be useful for e.g. facility owners to gain better knowledge of their fuels propensity for self-heating and thereby facilitate safer storage. The screening test procedure can also be used for research purposes. Experiments have been performed with 31 different biomass pellet batches to investigate how the pellet composition, origin, etc. influence the reactivity of the pellets. The results from these experiments clearly show a significant difference in reactivity between different types of pellets. The results indicate that pine/spruce mix pellets are significantly more reactive than all other types of pellets tested, and that pellets consisting of 100 % pine are more reactive than pellets consisting of 100 % spruce. Pellets produced from winery wastes, straw, or eucalyptus, have low reactivity compared to pellets consisting of pine and/or spruce. The reactivity of the pellets was shown to be reduced by either introducing certain types of anti-oxidants into the pellets or by extracting lipids from the raw material of pellets. The screening test procedure is already being used today by some facility owners for assessing their fuels propensity for self-heating. The procedure is also one of the suggested test methods in “ISO/CD 20049 Solid biofuels — Determination of self-heating of pelletized biofuels”. / This thesis presents experimental work performed to develop a sensitive screening test procedure for biomass pellets, using isothermal calorimetry for direct measurement of the heat production rate. This method can be used to directly compare the reactivity, that is how prone the fuel is to self-heating, of different batches of biomass pellets. The results could be used for safety assessment by the industry or for research purposes to investigate how different factors influence the self-heating potential. Experiments were performed with 31 different biomass pellet batches to investigate how the pellet composition, origin, etc. influence the heat release rate. The results clearly show that there is a significant difference in reactivity between different types of pellets. Pine/spruce mix pellets are more reactive than the other types of pellets tested and pellets consisting of 100 % pine are more reactive than pellets consisting of 100 % spruce. Pellets produced from winery wastes, straw, or eucalyptus, have low reactivity compared to pellets consisting of pine and/or spruce. The results also show that the reactivity of the pellets can be reduced by either introducing certain types of anti-oxidants into the pellets or by extracting lipids from the raw material of pellets.
|
Page generated in 0.0391 seconds