Integrated microfluidic devices for biomedical analysis attract lots of interest in the MEMS (Micro-Electro-Mechanical-Systems) research field. However, the characteristic Reynolds number for liquids flowing in these microchannels is very small (typically less than 10). At such low Reynolds numbers, turbulent mixing does not occur and homogenization of the solutions occurs through diffusion processes alone. Hence, a satisfactory mixing performance generally requires the use of extended flow channels and takes longer to accomplish such that the practical benefits of such devices are somewhat limited. Consequently, accomplishing the goal of u¡VTAS requires the development of enhanced mixing techniques for microfluidic structures. This study first presents a microfluidic mixer utilizing alternatively switching electroosmotic flow and proposes two microchannel designs of T-form and double-T-form micromixer. Switching DC field is used to generate the electroosmotic force to drive the fluid and also used for mixing of the fluids simultaneously, such that moving parts in the microfluidic device and delicate external control system are not required for the mixing purpose. Furthermore, this study also proposed a novel pinched-switching mode in the T-form microfluidic mixer, which could be effectively increase the perturbation within the fluid to promote the mixing efficiency. In this study, computer simulation for the operation conditions is used to predict the mixing outcomes and the mixing performance is also confirmed experimentally. Result shows the mixing performance can be as larger as 95% within the mixing distance of 1 mm downstream the common boundary between the different sample fluids. The novel method proposed in this study can be used for solving the mixing problem in a simple way in the field of micro-total-analysis-systems. Furthermore, in order to demonstrate the proposed micromixer is feasible for on-line bio-reaction, this study designs a fully integrated device for demonstration of DNA/enzyme reaction within the microfluidic chip. The microchip device contains a pre-column concentrating region, a micro mixer for DNA-enzyme mixing, an adjustable temperature control system and a post-column concentration channel. The integrated microfluidic chip has been used to implement the DNA digestion and extraction. Successfully digestion of £f-DNA using EcoRI restriction enzyme in the proposed device is demonstrated utilizing large-scale gel electrophoresis scheme. Results show that the reaction speed doubled while using the microfluidic system. In addition, on-line DNA digestion and capillary electrophoresis detection is also successfully demonstrated using a standard DNA-enzyme system of $X-174 and Hae III. Finally, this reasearch also proposes a novel cell/microparticle manipulation platform by integrating an optical tweezer system and a micro flow cytometer. During operation, electrokinetically driven sheath flows are utilized to focus microparticles to flow in the center of the sample stream then pass through an optical manipulation area. An IR diode laser is focused to generate force gradient in the optical manipulation area to manipulate the microparticles in the microfluidic device. Moving the particles at a static condition is demonstrated to confirm the feasibility of the home-built optical tweezer. The trapping force of the optical tweezer is measured using a novel method of Stocks-drag equilibrium. The proposed system can continuously catch moving microparticles in the flowing stream or switch them to flow into another sample flow within the microchannel. Target particles can be separated from the sample particles with this high efficient approach. More importantly, the system demonstrates a continuously manipulation of microparticles using non-contact force gradient such that moving parts and delicate fabrication processes can be excluded. The proposed system is feasible of high-throughput catching, moving, manipulation and sorting specific microparticles/cells within a mixed sample and results in a simple solution for cell/microparticle manipulation in the field of micro-total-analysis-systems. In this thesis, low-cost soda-lime glass substrates are adopted for the microchip fabrication using a simple and reliable fabrication process. Three kinds of novel microfluidic devices including an electrokinetically-driven microfluidic mixer, a high throughput DNA/enzyme reactor and an optically cell manipulation platform are successfully demonstrated. It is the author¡¦s believes that the results of this study will give important contributions in the development of micro-total-analysis-systems in the future. With the success of this study, we have a further step approaching to the dream of lab-on-a-chip system for bio-analytical applications.

No description available.

Les capteurs électrochimiques sont des outils pour la détection fiable, peu coûteux, avec une haute sensibilité et sélectivité, pour la détermination des composés biologiques et chimiques dans les domaines du diagnostic clinique, l'environnement et l'industrie alimentaire. Particulièrement, les Immunocapteurs, alliant une très grande spécificité. Également des nouveaux techniques produisent des résultats similaires, par exemple, les capteurs basés sur la technique des Polymères à empreinte moléculaire, la quelle produise des récepteurs artificiels. La technique devient très important dans les sciences bioanalytiques parce qu'il porte des avantages inhérents sur les récepteurs naturels: une grande stabilité dans des diffèrent environnement et conditions, également comptent avec une grande flexibilité dans la conception, une large gamme de molécules peuvent être utilisées. L'objectif du travail présenté ici est de développer des capteurs électrochimiques avec une très grande affinité et spécificité pour une analyte. Les quelles comprennent des applications très divers comme dans la protection de l'environnement, la sécurité alimentaire et le domaine biomédical. La première partie de la thèse présent l'état actuel de la conception et techniques de fabrication des biocapteurs. Ensuite, les aspects généraux des immuno capteurs électrochimiques et capteurs base sur des aptamères sont présentés ici, ainsi que plusieurs exemples rapportés dans la littérature pour la détection de marqueurs biologiques du cancer. Les avantages de l'intégration nanomatériaux dans les dispositifs de détection sont présentés. Ensuite, plusieurs aspects sur la technique des Polymères à empreinte moléculaire sont introduits. La partie personnelle de contribution est structuré en trois chapitres: en premier temps la méthodologie et les résultats obtenus pour le développement de deux essais biologiques pour la détection du marqueur tumoral Mucinl. Le premier chapitre est dédié sur un capteur à base de billes magnétiques, dans le deuxième chapitre une capteur aptamère base sur des nanoparticules d'or sans aucun marquage et finalement un capteur basée sur la technique des Polymères à empreinte moléculaire, cette protocole a été appliqué pour la détection d'explosifs, des médicaments, des hormones et les pesticides / Electrochemical sensors provide reliable and inexpensive tools for the determination of biological and chemical compounds with high sensitivity and selectivity, in the fields of clinical diagnosis, environment protection and food industry. Immunosensors hold particular promise, combining the high specificity of immuno- reactions with the sensitivity of electrochemical methods. Artificial receptors based on molecularly imprinted technique attracted considerable attention in bioanalytical sciences due to inherent advantages over natural receptors, such as high stability in harsh conditions and freedom of molecular design towards a wide range of molecules. The aim of the thesis presented here was to develop electrochemical affinity sensors based on various recognition receptors for environment monitoring, food safety and biomedical field. The first part of the thesis reviews the current state of knowledge in these fields. General aspects of electrochemical immuno- and apta-sensors are presented herein, together with several examples reported in the literature for the detection of cancer biomarkers. The advantages of integrating nanomaterials in sensing devices are then presented. At last, several aspects of the molecularly imprinted polymers are introduced. The personal contribution part is structured in three chapters, that include the methodology and results obtained for the development of biosensors for the detection of Mucinl tumor marker, the first chapter being focused on bioassays based on magnetic beads and second chapter on a label-free aptasensor based on gold nanoparticles, and finally, a third chapter dedicated to the molecularly imprinted-based sensors for the detection of explosives, drugs, hormones and pesticides