Thesis--Wisconsin. / Vita. Includes bibliographical references (leaves 432-447).

Zugl. überarb. Fassung von: Leipzig, Univ., Diss., 2007

Diss. Univ. Twente, Enschede, 2006.

The trumpet is among the most ancient of all musical instruments, and an examination of its history reveals that it has consistently maintained important and specific symbolic roles in society. Although from its origins this symbolic identity was linked to the instrument’s limited ceremonial and signaling function, the seventeenth century represents a period in which a variety of new roles and identities emerged. Bologna and Venice represent the two most important centers for trumpet writing in Italy during the seventeenth century. Because of the differing ideologies at work in these cities, two distinctive symbolic images of the instrument and two different ways of writing for it emerged. The trumpet’s ecclesiastic role in Bologna and its participation in Venetian opera put the instrument at the service of two societies, one centered around the Church, and another around a more permissive state. Against the backdrop of the social and political structures in Venice and Bologna, and through an examination of its newly-emerging musical roles in each city, the trumpet’s changing identities during a most important point in the history of the instrument will be examined.

Yes

Die Arbeit untersucht die, durch den Bologna-Prozess angestrebte Förderung der Doktorandenausbildung für Fachhochschul-Master-Absolventen an deutschen Universitäten und die reale Umsetzung. / The work analyses the pursuit of the Bologna-Process to improve the quality of doctoral education for the master´s graduates of higher education programs (Fachhochschule)in German universities. The realisation of this pursuit has also been analysed in this work.

The research problem that formed the basis of the investigation reported upon in this thesis relates to the challenges and opportunities that arise from the retention of World English Speaking (WES) student-teachers as they seek to gain entry into the teaching profession in Australia. Two key questions guided the exploration of this problem. How do the curriculum, teaching and assessment practices in teacher education assist and/or hinder WES student-teachers’ retention? What problems, if any, do they have in becoming Australian teachers? These are examined from the perspective of the WES student-teachers themselves, their teacher educators and the WES school teachers involved in supervising them during their practicum. Facing acute teacher shortage in some subjects and some areas in Australia, this research project investigated issues affecting retention of WES student-teachers to meet the requirements of Australia’s ethnically diversified school communities. Methodologically, this study used an evidence-driven, conceptually informed, valuerational approach to education research. A case study design provided the basis for a cross-sectional, retrospective, non-experimental plan which was used to collect and analyse data. The subjects, teacher educators and WES student-teachers were contacted via the university teacher education program; while WES school supervising teachers were selected from schools where WES student-teachers did their practicum. Theoretically it explores the power and limitations of current theorisation of teacher shortages in terms of global cultural flows, specifically the trans-national mobility of knowledge workers. This thesis situates their experiences in the context of current and projected teacher shortages as well as testing current theorisation about global cultural flows of people in terms of the trans-national mobility of knowledge workers. This thesis argues that while teacher-educators recognise the difficulties in engaging educationally with WES student-teachers, and WES student teachers and their supervising teachers are aware of and able to identify other difficulties they confront becoming “Australian teachers”, the possibilities for making productive responses is constrained by cultural as much as economic factors. / Doctor of Philosophy (PhD)

The main objective of this research was to investigate possible uses of Western-Canadian grown chickpea (<i>Cicer arietinum</i> L.) in the form of flour, starch and protein isolates in low-fat pork bologna. <p>In the first study, flour, starch and protein isolates from six chickpea cultivars (three Kabuli and three Desi) from two harvests (2005 and 2006) were evaluated for their physico-chemical, functional and thermal properties. Chickpea flour was made by grinding seed to pass through a 0.1mm screen, whereas protein isolates and starch were prepared by a wet milling process. Protein isolates were prepared from chickpea flour (23.2% protein on average) by alkaline extraction (pH 8.0) and isoelectric precipitation (pH 4.3). Protein isolates contained 72.8-85.3% protein; the starch fraction contained 93.0-98.0% starch. On SDS-PAGE, the chickpea flours and protein isolates contained similar polypeptide bands in the range of 30 to 55 kDa, with three major bands at approximately 50-55, 40 and 30 kDa. Least gelation concentration (LGC) for chickpea flours ranged from 6-14%; LGC for chickpea protein isolates ranged from 10-14%. Differential scanning calorimetry (DSC) of chickpea flour slurries revealed two endothermic peaks. One corresponded to starch gelatinization at approximately 64°C, which was slightly higher than for the starch fraction (~60°C). The second broad peak at approximately 96°C corresponded to the denaturation of the globulin protein fraction, which was also slightly higher than for the protein isolates (~91°C). Chickpea flour exhibited nitrogen solubility index values higher than those of chickpea protein isolates and soy and pea protein isolates. Chickpea protein isolates exhibited water holding capacities, oil absorption capacities, emulsion activity indeces and emulsion stability indeces higher than those of the chickpea flours. CDC Xena (Kabuli) and Myles (Desi), in general, most exhibited properties appropriate for meat applications. In the second study, the efficacy of flour, starch and protein from CDC Xena (Kabuli hereafter) and Myles (Desi hereafter) were investigated in low-fat pork bologna (LFPB). Low-fat pork bologna (<5% fat) was prepared by incorporating 2.5 or 5.0% flour, 1.5 or 3.0% protein isolate (protein basis), or 1.0 or 2.0% starch in the formulation. Controls were prepared without any binder, and formulations containing wheat or pea flour, soy or pea protein isolate, potato or pea starch, or extra meat were prepared for comparison. Inclusion of chickpea flour, protein or starch had a positive effect (P<0.05) on the cook yield, expressible moisture and purge of LFPB, and had little effect on colour. Increasing chickpea flour substitution from 2.5 to 5.0% altered the sensory and instrumental textural quality of LFPB significantly (P<0.05). Desi flour at 5.0% showed the highest TPA (texture profile analysis) hardness and chewiness, Allo-Kramer shear values and torsion shear stress. Similarly, LFPB containing chickpea protein isolate (CPI), soy protein isolate (SPI) or pea protein isolate (PPI) (3.0% protein basis) was firmer than either LFPB containing 1.5% protein from CPI, SPI or PPI or the control-I (with the same level of meat protein). Likewise, LFPB formulated with 2.0% Kabuli or Desi starch had higher TPA values than those prepared with pea or potato starch. For most flavour sensory properties, Kabuli and Desi chickpea flour and starch, irrespective of level of incorporation, performed similarly to the control. However, panellists noted more off-flavours with the addition of wheat flour or pea flour at 5.0%. Chickpea protein isolate, SPI or PPI at the 1.5% protein addition level did not alter the flavour properties of LFPB.<p>It was concluded that chickpea flour, starch and protein had potential for utilization as extenders in low-fat meat emulsion systems such as frankfurters and bologna.

The main objective of this research was to investigate possible uses of Western-Canadian grown chickpea (<i>Cicer arietinum</i> L.) in the form of flour, starch and protein isolates in low-fat pork bologna. <p>In the first study, flour, starch and protein isolates from six chickpea cultivars (three Kabuli and three Desi) from two harvests (2005 and 2006) were evaluated for their physico-chemical, functional and thermal properties. Chickpea flour was made by grinding seed to pass through a 0.1mm screen, whereas protein isolates and starch were prepared by a wet milling process. Protein isolates were prepared from chickpea flour (23.2% protein on average) by alkaline extraction (pH 8.0) and isoelectric precipitation (pH 4.3). Protein isolates contained 72.8-85.3% protein; the starch fraction contained 93.0-98.0% starch. On SDS-PAGE, the chickpea flours and protein isolates contained similar polypeptide bands in the range of 30 to 55 kDa, with three major bands at approximately 50-55, 40 and 30 kDa. Least gelation concentration (LGC) for chickpea flours ranged from 6-14%; LGC for chickpea protein isolates ranged from 10-14%. Differential scanning calorimetry (DSC) of chickpea flour slurries revealed two endothermic peaks. One corresponded to starch gelatinization at approximately 64°C, which was slightly higher than for the starch fraction (~60°C). The second broad peak at approximately 96°C corresponded to the denaturation of the globulin protein fraction, which was also slightly higher than for the protein isolates (~91°C). Chickpea flour exhibited nitrogen solubility index values higher than those of chickpea protein isolates and soy and pea protein isolates. Chickpea protein isolates exhibited water holding capacities, oil absorption capacities, emulsion activity indeces and emulsion stability indeces higher than those of the chickpea flours. CDC Xena (Kabuli) and Myles (Desi), in general, most exhibited properties appropriate for meat applications. In the second study, the efficacy of flour, starch and protein from CDC Xena (Kabuli hereafter) and Myles (Desi hereafter) were investigated in low-fat pork bologna (LFPB). Low-fat pork bologna (<5% fat) was prepared by incorporating 2.5 or 5.0% flour, 1.5 or 3.0% protein isolate (protein basis), or 1.0 or 2.0% starch in the formulation. Controls were prepared without any binder, and formulations containing wheat or pea flour, soy or pea protein isolate, potato or pea starch, or extra meat were prepared for comparison. Inclusion of chickpea flour, protein or starch had a positive effect (P<0.05) on the cook yield, expressible moisture and purge of LFPB, and had little effect on colour. Increasing chickpea flour substitution from 2.5 to 5.0% altered the sensory and instrumental textural quality of LFPB significantly (P<0.05). Desi flour at 5.0% showed the highest TPA (texture profile analysis) hardness and chewiness, Allo-Kramer shear values and torsion shear stress. Similarly, LFPB containing chickpea protein isolate (CPI), soy protein isolate (SPI) or pea protein isolate (PPI) (3.0% protein basis) was firmer than either LFPB containing 1.5% protein from CPI, SPI or PPI or the control-I (with the same level of meat protein). Likewise, LFPB formulated with 2.0% Kabuli or Desi starch had higher TPA values than those prepared with pea or potato starch. For most flavour sensory properties, Kabuli and Desi chickpea flour and starch, irrespective of level of incorporation, performed similarly to the control. However, panellists noted more off-flavours with the addition of wheat flour or pea flour at 5.0%. Chickpea protein isolate, SPI or PPI at the 1.5% protein addition level did not alter the flavour properties of LFPB.<p>It was concluded that chickpea flour, starch and protein had potential for utilization as extenders in low-fat meat emulsion systems such as frankfurters and bologna.

Zugl.: Münster (Westfalen), Universiẗat, Diss., 2009.