This thesis aims to design a bearing composite steel structure for five-storey administration building with ground plan dimensions 35,00 x 50,00 m. Designed building has L-shaped plan, flat roof and attic all the way around. The largest part of the plan area occupies office zone with dimensions of 48,60 x 18,90 m. Contiguous zone communication and sanitation has dimensions of 13,50 x 15,90 m. Floor height is designed 3,60 m, the total height of the building is 18,70 m. Composite steel floor structure consists of transverse primary beams and hinge-connected secondary beams. Integrated formwork (trapezoidal sheet) has ribs oriented perpendicular to the secondary beams. Coupling is bidirectional. Construction will be done in two variants. Variant No.1 assumes primary and secondary beams (at the columns) hinge-connected with columns. In variant No.2 will be frame connection between primary beams and columns and together they will create 2D transverse frames with hinge-connected secondary beams. The supporting structure of the roof is designed similarly to ceiling, but reinforced concrete slab will be replaced with bracing in the roof plane and self-bearing rib sandwich panels. Vertical sheathing of the building provide sandwich panels and strip windows. The type of steel is S355. The building is designed for the site Hradec Králové. Standards and documents used in design of the bearing structure are included in the list of sources. The result of this work is a static analysis with an assessment of all elements of the selected (best) variant of the structure, drawing documentation and technical report.

Master´s thesis deals with the design and assessment of the roof construction of the multi-purpose hall in Holice. The other two dimensions of the hall are 28 x 45 m. Height of the hall is 11,28 m. Roofing is done in three variants. The final solution is processed for one presentation. The main supporting element is formed by cross-linking arc beam made of laminated wood. Girders are spaced 5 m and connected purlins. Stability of the construction by three field bracings. The cladding is a rafter, shuttering of OSB particle that carry the roof deck.

The goal of the submitted thesis is a design and assessment of a steel load-bearing structure of a multipurpose sports hall situated in Prostějov. The floor plan measurements of the object are 38x54 m with the maximum ceiling height of 9,5 m. Final design variant was chosen on the basis of two preliminary drafts, both processed according to standard ČSN EN. The structure is designed with respect to ultimate and serviceability limit states. The construction consists of 10 cross-links spaced by 6,0 m. The spatial rigidity of the structure’s main load-bearing system is provided by spatial elliptic trussed girders, longitudinal and sway bracings. Roof cladding is carried by purlins placed on trusses. Steel columns are designed as a part of gable walls. The project was carried out in Scia Engineer 2014 software. Some particular elements were subsequently assessed by means of manual calculation. The thesis also includes assessment of joints, construction details and drawing documentation.

This diploma thesis deals with the design expertise and supporting structures the single-roof sports hall for locality Brno. The ground plan dimensions are 42 x 72 m and ground clearance of about eight meters. Two variants are processed and selected variant is elaborated in detail. The sports hall is designed for most sports played indoors. In a static calculation are designed and assessed the main load-bearing elements such as truss glued laminated timber, wooden purlins, columns, girts and bracing. The work includes drawings.

The aim of the thesis is the design and the assessment of an administrative center in Vimperk. The building is divided into three height levels, the highest has 7 floors. The building is rectangular floor plan with dimensions of 102,5 x 48,0 m. The construction is designed as framing with truss roofing, bracing and purlins for attaching sheathing.

Diploma thesis deals with the design and assessment of the load bearing structure of a multi-storey building, proposed by the combination of two materials, steel and glued laminated timber. The building has a V-shape, the angle between legs is 120 °. Floor plan dimensions of one arm of the building are approximately 40x20m, building height is 24.3 meters. The building is designed with a flat green roof. The load bearing structure is solved as a heavy frame, lower three floors are made of steel and serves as the business premises, top four floors are residential, and their structure is designed of the glued laminated timber. Bracing of the whole structure is solved by a system of crossed steel rods.

The subject of this diploma thesis is the construction of a timber foot bridge over the wolf run in the Šumava National Park. The total length of the bridge is 240 m with two ground plan bends. The foot bridge includes three viewing decks, two of which are covered with shed roofs. The foot bridge is divided into 16 segments. Each segment is 15 m long with a width of 2.2 meters. The ground plan dimensions of the viewing decks are approximately 15x7 and 15x11 m. As the main structural material has been chosen glued laminated timber of the strength class GL28h, other elements are made of solid timber of the strength class C24. The thesis includes an introductory document, options analysis, technical report, static analysis, bill of material and drawings.

The theme of this thesis is the design and assessment of the supporting structure of a footbridge over the river Svratka in Brno. Span bridge is 40 meters and width of 4.2 meters. The bridge is located in the administrative area Brno - Bystrc.

The subject of this thesis is the conversion and alternative proposal to the existing steel structure roofing the winter stadium in Jindrichuv Hradec. The building has a rectangular plan with dimensions of 80 x 52 m. The roof structure consists of lattice trusses and purlins, plotted using lattice steel columns. The other possibilities are parabolic lattice trusses and purlin with fly bracing that were designed and evaluated in accordance with applicable standards. The solution using parabolic trusses is designed on the original footprint of the structure. The distance of each bond is 8 m.

The subject of this master´s thesis is a recalculation of the existing structure, design, static analysis and economic comparison of two variants of this bearing structure of the administrative building Jihomoravská plynárenská located in Brno. Ground plan dimensions and height of both these variants are based on existing disposition of the building. The diameter of the circular floor plan is 16,088 m and height of the structure is 29,46 m. With this new proposal of solution A and B, lower weight of structure in comparison to the existing state has been reached. Both variants have a bearing column in the middle of floor plan and new solution of ceiling structure. The most advantageous from the economic and assembly point of view is variant B. Design of this variant was processed in detail.