No description available.

No description available.

Streamer characteristics, breakdown strengths and gassing behaviour of insulating liquids under electric stresses are taken into account for a reliable design and safe operation of the transformer. Ester liquids which are biodegradable and have high fire point have been widely used in distribution transformers and some power transformers in recent years. It is also interesting to introduce ester liquids into High Voltage Direct Current (HVDC) converter transformers due to the fast development of HVDC transmission lines. Therefore, this thesis aims to investigate the pre-breakdown, breakdown characteristics and gassing behaviour of a synthetic ester liquid under DC and various impulse voltages where a mineral oil is tested as the benchmark. A comprehensive study of streamer characteristics and breakdown strength of the mineral oil and the synthetic ester liquid under both positive and negative DC voltages was carried out in the point-plane electric fields. Characteristics of streamer length, propagation velocity and shape were analysed based on shadowgraph images obtained at a gap distance of 10 mm, using a multi-channel ultra-high speed camera. Streamer inception voltages with the tip radii of 5 µm, 10 µm, 20 µm and 50 µm and breakdown voltages at various gaps of 2 mm, 5 mm, 10 mm, 20 mm and 30 mm were also investigated. The results indicate that there is no obvious streamer propagation (less than about 10% of the gap distance) under negative polarity even when the applied voltage approaches breakdown voltage. At the same applied voltage level, the streamer in the synthetic ester liquid propagates faster and further than that in the mineral oil. As a result, the breakdown voltages of the synthetic ester liquid are lower than those of the mineral oil at all the gap distances investigated under both polarities. Experimental and modelling studies of pre-breakdown and breakdown phenomena in the mineral oil and the synthetic ester liquid under impulse waveforms with different tail-time were carried out in the point-plane electric fields. A compact solid-state switch based impulse generator was used to provide different impulse waveforms from short tail-time to 'step-like' tail-time: 0.8/8 µs, 0.8/14 µs, 0.8/30 µs and 0.8/3200 µs. A point-plane electrode configuration with a small gap distance of 10 mm and a tip radius of 10 µm was used. The results indicate that the shorter tail-time impulse waveform results in a shorter stopping length and higher breakdown voltage; however it does not affect the instantaneous breakdown voltage and time to breakdown. A mathematical model is therefore described to predict the breakdown voltage under different impulse waveforms. In addition, with the similar stopping length, higher energy injected from the short tail-time impulse caused the streamers to have more branches than those under the long tail-time impulse. The characteristics of fault gas generation in the mineral oil and the synthetic ester liquid under various levels of electrical faults were studied. A test platform with functions of automatic spark fault control and data acquisition was developed. The effects of spark numbers (from 20 to 500), gap distance (5 mm and 10 mm) and voltage levels (Vb-99.9% and 1.5Vb-99.9%) on fault gas generation in liquids were studied. The key gases in the mineral oil are H2 and C2H2, while the key gases in the synthetic ester liquid are H2, C2H2 and CO. The amount of fault gas generation increases linearly with the number of sparks. However, the number of sparks does not have an obvious effect on fault gas pattern and gas generation per unit fault energy in µL/J. Spark at a larger gap distance or under a higher applied breakdown voltage generates more fault gases due to higher injected fault energy.

acase@tulane.edu / 1 / Roy Jason Taylor

No description available.

Abstract The tendency to manufacture of semiconductor is to minimize the size of device. With the size was minimized, the number of transistor on the chip was maximized at the same time .However, when the drift region of Power-MOSFET is shorter will result in the Breakdown Voltage is lower, so this do not conform our purpose for application, and therefore we should look for some alternative method to enhance efficiency. One of these method of efficiency promotion is adopting channel strain. We adopt bending silicon substrate to obtain strain. By using this method, we successfully enhance drain current and mobility 12.1% and 4.1% individually. Furthermore, regarding the reliability study, we realize the hot-carrier effect influence under strain silicon. The longer the size(Lg & DL) of Power- MOSFET , the reliability is better. When device were bent under Bending R=40mm and Lg=0.8(m conditions, we can obtain the better reliability of device than flat chip.

No description available.

The natural breakdown of three pesticides on the UK Red List (dieldrin, simazine and trifluralin) in water and soil varied with environmental conditions. In both sterile and unsterile water, trifluralin was degraded to some extent at 20 and 30°C. In contrast, dieldrin and simazine were stable over the 42 days incubation period. A gradient HPLC method was developed for the simultaneous quantification of the three pesticides in soil. In field capacity soil mixtures of the three pesticides (5 and 10 ppm) showed a similar stability with limited degradation at 20°C but increased rates of degradation at 30°C. At the higher concentration the pesticides naturally degraded at a slower rate. Simazine and trifluralin degradation was significantly enhanced with increasing temperature from 20 to 30°C. Water potential (field capacity~ -0.065 MPa~ and - 0.28 MPa) had little effect on the natural breakdown rate of dieldrin. Simazine showed a greater breakdown in the mid-wetness soil~ while trifluralin was degraded rapidly in the field capacity soil, but not at all in the driest treatment over the 70 day experimental period. In vitro studies on solid agar media overlayed with cellophane showed that of four fungi examined~ Trametes cingulata, Trametes socotrana (tropical species) and Phanerochaete chrysosporium and Polystictus versicolor (temperate species) all except P.chrysosporium were able to grow in the presence of 5 ppm of any of the three pesticides at 20 and 30°C, with the latter only growing at 30°C. At 10 ppm concentration P. chrysosporium did not grow, regardless of temperature or time of incubation (up to 56 days). HPLC was used to quantify the temporal rates of degradation in the solid agar media and this showed that P. versicolor and T. socotrana were very effective at breaking down the three pesticides, at 20 and 30°C. The chosen fungi were grown on chopped straw as a carrier and incorporated into soil microcosms in the ratio of 1:10 containing mixtures of the three pesticides (5, 10 ppm) at 20 and 30°C, and subsequently under different water potential regimes at 20°C only, over periods of 70 days. P. versicolor alone significantly increased breakdown of 5 ppm dieldrin by 26% over untreated controls, while simazine breakdown was increased by 16%. However, for simazine at 30°C there was no difference between temporal rates of natural breakdown and those containing fungal inocula, regardless of concentration. With 5 ppm trifluralin, a maximum breakdown in untreated soil was 67% after 70 days. By contras~ this pesticide was undetectable after 28 days in the presence of the inoculant P . versicolor. This increased to 42 days where a mixture of the two fungi were used. Generally the mixture of fungi used in this study were not as effective in bioremediation of these pesticides as a single species. Field capacity soil appeared to be the best condition for P. versicolor to degrade dieldrin and trifluralin added at 10 ppm. However, for simazine this occurred in the driest water potential (-0.28 MPa) used.

No description available.

No description available.