To create a digital model of the surface of some object from a setof points, representing positions on the surface of this object, requiresinformation about the relationship between the points. This informa-tion is not immediatly accessible. Thus, for creating such a model itis necessary to establish relationsships between the points of the set.In addition, it should be possible to render the resulting modelas efficiently as possible. Modern graphics cards offer to send vertexinformations as triangle strips; by using triangle strips the informationabout the triangles can be compressed.This work is about a method for retrieving information about therelations between points in an unstructered spatial point set and trans-forming this information into triangle strips. It is based on the convexlayers of a planar point set and an algorithm for triangulating theannuli of the convex layers, which uses the Rotating Calipers.

Body size is an important determinant of reproduction in capital breeding animals, including large mammals. However, it is not always practical to hand-measure body size of free-ranging species. In recent years, parallel-laser photogrammetry has been used to obtain remote estimates of body size for some animals, though it remains unknown how well this technique might capture variation in curvilinear body features or if the distance between parallel-laser calipers is altered when projected onto a curved surface. In this thesis, I describe a photogrammetric system that may be useful for obtaining body-size measurements from unrestrained large mammals that permit approach, using domestic horses (Equus ferus caballus) as a model (Chapter 2). I then apply this technique in the field to a wild (feral) population of horses at Sable Island National Park Reserve, Nova Scotia, Canada, where I include body size measurements as variables in a detailed analysis of factors affecting reproduction in females (Chapter 3). Using my parallel-laser photogrammetric system, I show how curvilinear hand-measurements (e.g., across the barrel of a horse) are stongly correlated with their respective linear photogrammetric estimates (R2 ≥ 0.998), and most photogrammetric estimates using my system had high reliability. Using three variables of body size, photogrammetric estimates and hand-measurements explained 86.0% and 96.2%, respectively, of the variation in body weight of a sample of domestic Newfoundland ponies. On Sable Island, Nova Scotia, I examined the relationship of numerous variables (including skeletal body size and body condition) with the probability of yearly reproductive success for female Sable Island horses (years 2008–2012), where I define reproductive success as production of an offspring surviving to one year of age. Age class was a dominant factor predicting reproductive success, as expected from trends previously associated with body size or reproductive experience iii in other populations. Age-class specific energy budgets or social and sexual behaviour caused a more pronounced relationship with body condition at parturition in sub-adults, and body condition at conception and stability of consort relationships were associated with reproductive success in adults. In addition, relationships with local density suggested limited forage around the time of conception and limited water during lactation might also influence reproductive success in adult females. Although relationships were evident for age class, which is correlated with body size, reproductive success was not related to skeletal body size, past reproductive experience, age of primiparity, or band structure. The capital breeding strategy and year-round social associations seen in horses make their reproductive ecology a combination of patterns observed for large ungulates and social primates.

Os materiais de uso único (MUU) são utilizados há décadas na assistência à saúde. Inicialmente produzidos com a finalidade de prontamente disponibilizar os materiais para uso na assistência a saúde e ao mesmo tempo diminuir a sobrecarga com o trabalho inerente ao reprocessamento dos materiais. Com o passar do tempo, principalmente por questões financeiras, estes passaram a ser reutilizados. A partir de então diversos questionamentos têm sido suscitados a respeito do risco de transmissão de infecção pelo reuso destes artigos em decorrência da dificuldade para de limpeza, desinfecção e esterilização seguras destes. Os materiais utilizados para as cirurgias vídeo-laparoscópicas encontram-se entre os MUU de preço considerável e complexidade importante em relação às dificuldades para limpeza, devido à sua conformação com espaços internos inacessíveis e impossibilidade de desmonte. Isto posto, as pinças grasper, dissector, tesoura, agulha de Veress, sistema de sonda de eletrocirurgia (ou aspirador e irrigador) e sua respectiva haste, instrumentais básicos nos procedimentos de vídeo-cirurgia-laparoscópica, foram o objeto desta investigação com o propósito de avaliar a eficácia da esterilidade destes acessórios de uso único após contaminação artificial desafio e comparar os resultados dos testes de esterilidade dos MUU com os dos materiais equivalentes reprocessáveis – denominados neste estudo como grupo controle. Tratou-se de uma pesquisa experimental, laboratorial e comparativa. O inóculo utilizado para a contaminação artificial dos instrumentais de uso único constituiu-se de suspensão de esporos bacterianos do Bacillus atrophaeus var. niger e de sangue de carneiro desfibrinado esterilizado. Para o grupo controle o microrganismo eleito foi o Geobacillus stearothermophilus acrescido também de sangue de carneiro desfibrinado. Antes de proceder aos experimentos validou-se a metodologia analítica em duas fases: fase 1 - realizada a contagem de U.F.C. em três unidades de cada um dos materiais dos grupos experimental e controle após a contaminação artificial antecedendo a limpeza; fase 2 - realizada a contagem de U.F.C. em três unidades de cada um dos materiais dos grupos experimental e controle após a contaminação artificial e procedimento de limpeza. Desta forma, assegurada a recuperação dos contaminantes em todas as amostras da primeira fase e a diminuição do bioburden inicial após a limpeza dos instrumentais na 2ª fase, deu-se prosseguimento aos experimentos. Os materiais laparoscópicos foram intencionalmente contaminados com o inóculo desafio e submetidos após ao protocolo teste para validação que consistiu da seguinte seqüência: limpeza automatizada em lavadora ultra-sônica com retrofluxo com auxílio do detergente enzimático, limpeza manual complementar com serpilhos e irrigação dos lumens dos instrumentais com água sob pressão. Por fim, foi realizado o enxágüe com água destilada esterilizada, secagem com ar comprimido medicinal, acondicionamento em embalagem de papel grau cirúrgico e filme e submetidos a esterilização em Óxido de Etileno 12/88 (materiais de uso único) e em autoclave (materiais de aço inoxidável). Os materiais esterilizados foram inoculados diretamente nos meios de cultura de caseína soja e incubados por 20 dias quando foi feita a leitura final dos resultados das culturas. Os resultados encontrados foram 100% negativos para a recuperação dos microrganismos contaminantes nos 2 grupos - experimental e controle. Estes achados permitiram concluir que o reprocessamento dos materiais de uso único foi validado em relação à esterilidade permitindo chegar a um protocolo de reprocessamento / Single use devices (SUD) have been used in healthcare for decades. They were initially produced for making them readily available for use in healthcare and at the same time lower the inherent workload for device reprocessing. After time, mainly for financial reasons, they became reused. Since then, several questioning has been raised regarding to the risk of infection transmission by reusing these devices due to their difficulty of safe cleaning, disinfection and sterilization. Devices used for videosurgeries are among the SUD of considerable price and important complexity due to cleaning difficulties, because of their adjustments in inaccessible inner spaces and impossibility of taking them out into pieces. Thus, grasper calipers, dissecting forceps, scissors, Veress insuflation needle, electrosurgery probe system (or suction and irrigation tubes) and its respective dissector cannula, basic devices in videosurgery laparoscopic procedures were all the subject of investigation aimed to evaluate the effectiveness of sterility of these single use products after challenged artificial contamination and comparing the results of sterility tests of SUD to their equivalent reprocessed devices – named in this study as control group. It’s a comparative, laboratory experimental research. The inoculum used for artificial contamination of single use devices was the suspension of Bacillus atrophaeus var. niger bacteria spores and sterilized defibrinated sheep blood. For the control group, the elected strain was Geobacillus stearothermophilus adding also the defibrinated sheep blood. Before carrying out the experiments, the analytical methodology was validated in two phases: phase 1 – counting the colony formation units in three units of each one of the devices from the experimental and control groups after the artificial contamination and cleaning procedures. This way, assured the contaminant recovery in all samples of the 1st phase and the reduction of initial bioburden after device cleaning in the 2nd phase, it was carried on the experiments. The laparoscopic devices were intentionally contaminated with challenged inoculum and submitted after the trial test to validation that was consisted of the following sequence: cleaning in automated narrow-lumen cleaner with enzymatic detergent, complementary manual cleaning with brush and lumen washing of devices with water under pressure. At last, it was made rinsing with sterile distillated water, drying with medical compressed air, packing in surgical paper and film wrapping and submitted to sterilization in ethylene oxide 12/88 (single use devices) and in autoclave (stainless steel devices). The sterilized devices were contaminated directly in the casein soy media and incubated for 20 days when it was made the final reading of media results. The outcomes found were 100% negative for recovering of contamination strains in the 2 groups – the experimental and the control. These findings permitted us to conclude that single use device reprocessing was validated regarding to sterility allowing us to get a reprocessing guideline

Os materiais de uso único (MUU) são utilizados há décadas na assistência à saúde. Inicialmente produzidos com a finalidade de prontamente disponibilizar os materiais para uso na assistência a saúde e ao mesmo tempo diminuir a sobrecarga com o trabalho inerente ao reprocessamento dos materiais. Com o passar do tempo, principalmente por questões financeiras, estes passaram a ser reutilizados. A partir de então diversos questionamentos têm sido suscitados a respeito do risco de transmissão de infecção pelo reuso destes artigos em decorrência da dificuldade para de limpeza, desinfecção e esterilização seguras destes. Os materiais utilizados para as cirurgias vídeo-laparoscópicas encontram-se entre os MUU de preço considerável e complexidade importante em relação às dificuldades para limpeza, devido à sua conformação com espaços internos inacessíveis e impossibilidade de desmonte. Isto posto, as pinças grasper, dissector, tesoura, agulha de Veress, sistema de sonda de eletrocirurgia (ou aspirador e irrigador) e sua respectiva haste, instrumentais básicos nos procedimentos de vídeo-cirurgia-laparoscópica, foram o objeto desta investigação com o propósito de avaliar a eficácia da esterilidade destes acessórios de uso único após contaminação artificial desafio e comparar os resultados dos testes de esterilidade dos MUU com os dos materiais equivalentes reprocessáveis – denominados neste estudo como grupo controle. Tratou-se de uma pesquisa experimental, laboratorial e comparativa. O inóculo utilizado para a contaminação artificial dos instrumentais de uso único constituiu-se de suspensão de esporos bacterianos do Bacillus atrophaeus var. niger e de sangue de carneiro desfibrinado esterilizado. Para o grupo controle o microrganismo eleito foi o Geobacillus stearothermophilus acrescido também de sangue de carneiro desfibrinado. Antes de proceder aos experimentos validou-se a metodologia analítica em duas fases: fase 1 - realizada a contagem de U.F.C. em três unidades de cada um dos materiais dos grupos experimental e controle após a contaminação artificial antecedendo a limpeza; fase 2 - realizada a contagem de U.F.C. em três unidades de cada um dos materiais dos grupos experimental e controle após a contaminação artificial e procedimento de limpeza. Desta forma, assegurada a recuperação dos contaminantes em todas as amostras da primeira fase e a diminuição do bioburden inicial após a limpeza dos instrumentais na 2ª fase, deu-se prosseguimento aos experimentos. Os materiais laparoscópicos foram intencionalmente contaminados com o inóculo desafio e submetidos após ao protocolo teste para validação que consistiu da seguinte seqüência: limpeza automatizada em lavadora ultra-sônica com retrofluxo com auxílio do detergente enzimático, limpeza manual complementar com serpilhos e irrigação dos lumens dos instrumentais com água sob pressão. Por fim, foi realizado o enxágüe com água destilada esterilizada, secagem com ar comprimido medicinal, acondicionamento em embalagem de papel grau cirúrgico e filme e submetidos a esterilização em Óxido de Etileno 12/88 (materiais de uso único) e em autoclave (materiais de aço inoxidável). Os materiais esterilizados foram inoculados diretamente nos meios de cultura de caseína soja e incubados por 20 dias quando foi feita a leitura final dos resultados das culturas. Os resultados encontrados foram 100% negativos para a recuperação dos microrganismos contaminantes nos 2 grupos - experimental e controle. Estes achados permitiram concluir que o reprocessamento dos materiais de uso único foi validado em relação à esterilidade permitindo chegar a um protocolo de reprocessamento / Single use devices (SUD) have been used in healthcare for decades. They were initially produced for making them readily available for use in healthcare and at the same time lower the inherent workload for device reprocessing. After time, mainly for financial reasons, they became reused. Since then, several questioning has been raised regarding to the risk of infection transmission by reusing these devices due to their difficulty of safe cleaning, disinfection and sterilization. Devices used for videosurgeries are among the SUD of considerable price and important complexity due to cleaning difficulties, because of their adjustments in inaccessible inner spaces and impossibility of taking them out into pieces. Thus, grasper calipers, dissecting forceps, scissors, Veress insuflation needle, electrosurgery probe system (or suction and irrigation tubes) and its respective dissector cannula, basic devices in videosurgery laparoscopic procedures were all the subject of investigation aimed to evaluate the effectiveness of sterility of these single use products after challenged artificial contamination and comparing the results of sterility tests of SUD to their equivalent reprocessed devices – named in this study as control group. It’s a comparative, laboratory experimental research. The inoculum used for artificial contamination of single use devices was the suspension of Bacillus atrophaeus var. niger bacteria spores and sterilized defibrinated sheep blood. For the control group, the elected strain was Geobacillus stearothermophilus adding also the defibrinated sheep blood. Before carrying out the experiments, the analytical methodology was validated in two phases: phase 1 – counting the colony formation units in three units of each one of the devices from the experimental and control groups after the artificial contamination and cleaning procedures. This way, assured the contaminant recovery in all samples of the 1st phase and the reduction of initial bioburden after device cleaning in the 2nd phase, it was carried on the experiments. The laparoscopic devices were intentionally contaminated with challenged inoculum and submitted after the trial test to validation that was consisted of the following sequence: cleaning in automated narrow-lumen cleaner with enzymatic detergent, complementary manual cleaning with brush and lumen washing of devices with water under pressure. At last, it was made rinsing with sterile distillated water, drying with medical compressed air, packing in surgical paper and film wrapping and submitted to sterilization in ethylene oxide 12/88 (single use devices) and in autoclave (stainless steel devices). The sterilized devices were contaminated directly in the casein soy media and incubated for 20 days when it was made the final reading of media results. The outcomes found were 100% negative for recovering of contamination strains in the 2 groups – the experimental and the control. These findings permitted us to conclude that single use device reprocessing was validated regarding to sterility allowing us to get a reprocessing guideline