31 |
Estudi del comportament de components cromàtics. Aportació a la correcció dels errors provocats per la saturació dels CCDsRegincós Isern, Jordi 01 December 1996 (has links)
No description available.
|
32 |
Phosphor Coated UV-Responsive CCD Image SensorsAlexander, Stefan January 2002 (has links)
Typical CCD image sensors are not sensitive to Ultra-Violet (UV) radiation, because the UV photons have a penetration depth of 2nm in the ~1µm thick polysilicon gate material. An inorganic phosphor coating was developed previously (by Wendy Franks et al [1, 2]) that was shown to be a viable solution to creating a UV-sensitive CCD image sensor. The coating absorbs incident UV radiation (250nm) and re-emits it in the visible (550-611nm) where it can penetrate the gate material. This coating was deposited using a settle-coat type deposition. Improved coating techniques are presented here. These include a commercial coating from Applied Scintillation Technologies (AST), a Doctor-Blade coating, e-beam deposition, and laser ablation. The properties of the coating, and of the coated sensors are presented here. Tests performed on the sensors include Quantum Efficiency, Photo-Response Non-Uniformity, Contrast Transfer Function, and Lifetime. The AST coating is a viable method for commercial UV-responsive CCD image sensors. The Doctor-Blade coatings show promise, but issues with clustering of the coating need to be resolved before the sensors can be used commercially. E-beam deposition and laser ablation need further research to provide a viable coating.
|
33 |
Phosphor Coated UV-Responsive CCD Image SensorsAlexander, Stefan January 2002 (has links)
Typical CCD image sensors are not sensitive to Ultra-Violet (UV) radiation, because the UV photons have a penetration depth of 2nm in the ~1µm thick polysilicon gate material. An inorganic phosphor coating was developed previously (by Wendy Franks et al [1, 2]) that was shown to be a viable solution to creating a UV-sensitive CCD image sensor. The coating absorbs incident UV radiation (250nm) and re-emits it in the visible (550-611nm) where it can penetrate the gate material. This coating was deposited using a settle-coat type deposition. Improved coating techniques are presented here. These include a commercial coating from Applied Scintillation Technologies (AST), a Doctor-Blade coating, e-beam deposition, and laser ablation. The properties of the coating, and of the coated sensors are presented here. Tests performed on the sensors include Quantum Efficiency, Photo-Response Non-Uniformity, Contrast Transfer Function, and Lifetime. The AST coating is a viable method for commercial UV-responsive CCD image sensors. The Doctor-Blade coatings show promise, but issues with clustering of the coating need to be resolved before the sensors can be used commercially. E-beam deposition and laser ablation need further research to provide a viable coating.
|
34 |
Design and Assembly of a Rotational Laser Scanning System for Small Scale Seabed RoughnessLi, Jiu-min 29 July 2004 (has links)
This paper reports the design and development of an underwater laser scanning system to measure the geometry of underwater objects. The application of structure light scanning method requires a calibrated CCD camera as the input device. Because the underwater environment is by far different from that in the air. Conventional calibration methods adopted in the air can not be applied for the underwater cases. In this paper we propose an algorithm which is analogous to the idea of longitudes/latitude in map projection to calibration the CCD. The calibration board pattern is fabricated by laying vertical and horizontal grid dots of 5cm span with an NC milling machine. To obtain the higher accuracy, we redesign the laser source holder to make the board and laser scan line coplane. We use a new laser that is focus adjustable. So we can capture clearer image of the edge on the target. Then, we calibrate the CCD camera with the calibration board. For testing our new system, two test pieces are used. One is sine waves ripples with varying amplitudes from 8mm to 3 mm. The other one is a rough surface with know spatial power spectrum. Scanning results show that: Scanning from rough 1 meter away, the absolute error for the sine wave ripples is less than 1mm along vertical direction. The power spectrum for the rough surface is accurate to the order of 3 to 5mm wave number. In order to survive in the harsh underwater environment, we design and make a rotational scanning system. The system was designed as an automatic image-capturing system, utilizing single board computer as control plane to work in conjunction with PLC(Programmable Logic Controller) for System power management. When using two 12V batteries as main power source, obtaining samples once per hour, capturing 360 images per operation, the system may run for approximately 39 hours.
|
35 |
Segmentation d'images couleur par un opérateur gradient vectoriel multiéchelle et contour actif application à la quantification des phases minéralogiques du clinker de ciment /Anwander, Alfred Neyran, Bruno Baskurt, Atilla January 2005 (has links)
Thèse doctorat : Images et Systèmes : Villeurbanne, INSA : 2001. / Titre provenant de l'écran-titre. Bibliogr. p. 136-144.
|
36 |
Micro-satellite Camera DesignBalli, Gulsum Basak 01 January 2003 (has links) (PDF)
The aim of this thesis has been summarized as the design of a micro-satellite camera
system and its focal plane simulations. The average micro-satellite orbit heights
ranges in between 600-850 km and obviously a multipayload satellite brings volume
and power restrictions for each payload. In this work, an orbit height of 600 km and
a volume of 20× / 20× / 30 cm is assumed, since minimizing the payload dimensions
increases the probability of the launch. The pixel size and the dimensions of an
imaging detector such as charge-coupled device (CCD) have been defined by the
useful image area with acceptable aberration limits on the focal plane. In order to
predict the minimum pixel size to be used at the focal plane modulation transfer
function (MTF), point spread function (PSF), image distortion and aberration
simulations have been carried out and detector parameters for the designed camera
have been presented.
|
37 |
Effiziente robotergestützte Messtechnik durch intelligente Sensorausrichtung /Mönning, Frank. January 2006 (has links)
Zugl.: Aachen, Techn. Hochsch., Diss., 2006.
|
38 |
Thermal image analysis using calibrated video imagingLi, Dong, January 2006 (has links)
Thesis (Ph.D.)--University of Missouri-Columbia, 2006. / The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on April 23, 2009) Includes bibliographical references.
|
39 |
Entwicklung und Einsatz inline-mikroskopischer Verfahren zur Beobachtung biotechnologischer ProzesseRudolph, Guido. January 2007 (has links) (PDF)
Hannover, Universiẗat, Diss., 2007.
|
40 |
Eignung der flächenhaften Detektion zur Erweiterung der optischen Kohärenztomographie an stark streuenden dermalen StrukturenLazar, Aristotel Razvan. January 1999 (has links)
Ulm, Univ., Diss., 1999. / http://vts.uni-ulm.de/query/longview.meta.asp?documentid=384.
|
Page generated in 0.044 seconds